User Manual

Maximum Resolution Supported

Resolutions up to 7680 x 4320 @ 30 Hz (8K)

Resolutions up to 3840 x 2160 @ 120Hz (4K)

Ports

DisplayPort 1.4 (M)

Cable Length

901290 - 1m

901291 - 2m

901428 - 3m

901429 - 4.5m

Warranty

Warranty:

1-Year Limited

You may register your product here: www.visiontek.com/support/warranty-registration

For additional warranty information, please see our Warranty Page: www.visiontek.com/support/warranty-information

Support

Drivers

No drivers required

User Manual

Plug 'n Play

Spec Sheet

Please Wait...

FAQ

What are Active Adapters?

These adapters have a chip that helps convert video for the GPU. Your GPU will be able to do this for two

monitors but an active adapter is needed for more. Active adapters can only be adapter off of a DP or mDP

on a graphics card or docking station. The reason for this is a feature that DP has that makes it natively

active. Should you be connecting a DP monitor to a DP or mDP port on a card active adapters are

unnecessary.

What are Passive Adapters?

Non active adapters are called passive adapters. There is no easy way to tell the difference between an

active and passive adapter. Most often they look exactly alike. Most manufacturers put the word active

somewhere on their active adapters, like VisionTek. Though this is not always the case. Rule of thumb is, if it

does not say active on the adapter assume it is passive.