User manual

27
VGA Set
Press Ÿ/ź button and then use ENTER to enter the VGA set menu as below:
H-Pos
Press Ÿ/ź button and then use Ż/Ź adjust the horizontal position of the picture.
V-Pos
Press Ÿ/ź button and then use Ż/Ź adjust the vertical position of the picture.
Phase
Press Ÿ/ź button and then use Ż/Ź to adjust the phase of the picture.
Clock
PressŸ/źbutton and then useŻ/Ź to adjust the clock of the picture.
Auto Adjust
Press Ÿ/ź button and then use ENTER button to do auto adjust that automatically adjusts the available options for the best viewing
configuration.
Setting
Press Enter to do preset that can return to the factory setting.
-Phase This function allows you to remove any horizontal noise and clear or
sharpen the image of characters
-Clock This function is to minimize any vertical bars or stripes visible on the
screen background. And the horizontal screen size also will change.
-Position This function is to adjust the picture to Left/Right and Up/Down as
you prefer.