User manual

13
DTV connection
HDMI
This TV can receive Digital Over-the-air/Cable signals
without an external digital set-top box. However, if you
do receive Digital signals from a digital set-top box or other
digital external device, refer to the figure as shown
below.
This TV supports HDCP (High-bandwidth Digital
How to connect
Use the TV`s COMPONENT , PC or HDMI/DVI jack for
video connections, depending on your set-top box
connector. Then, make the corresponding audio
connections.
How to use
1. Turn on the digital set-top box. (Refer to the owner’s
manual for the digital set-top box.)
2. Use INPUT on the remote control to select
COMPONENT, PC or HDMI/DVI source.
Signal Component HDMI/DVI
480i Yes Yes
480p Yes Yes
720p Yes Yes
1080i Yes Yes
Digital Audio Output
Send the TV`s audio to external audio equipment (stereo
system) via the Digital Audio Output (Optical) port.
How to connect
1. Connect one end of an optical cable to the TV Digital
Audio(Optical) Output port.
2. Connect the other end of the optical cable to the digital
audio (optical) input on the audio equipment.
See the external audio equipment instruction manual for
operation.
Note
When connecting with external audio equipments, such as
amplifers or speakers, please turn the TV speakers off.