User manual

External Equipment Connections

NOTE: All cables shown are not included with the TV.

Choose Your Connection

There are several ways to connect your television,

depending on the components you want to connect and the

quality of the signal you want to achieve. The following are

examples of some different ways to connect your TV with

different input sources.

VCR connection

To avoid picture noise (interference), leave an adequate

distance between the VCR and TV.

Connection Option 1

Set VCR output switch to channel 3 or 4 and then tune the

TV to the same channel number.

Connection Option 2

1. Connect the audio and video cables from the VCR's

output jacks to the TV input jacks, as shown in the figure.

When connecting the TV to VCR, match the jack colors

(Video = yellow, Audio Left = white, and Audio Right = red).

If you connect an S-VIDEO output from VCR to the S-VIDEO

input, the picture quality is improved; compared to

connecting a regular VCR to the Video input.

2. Insert a video tape into the VCR and press PLAY on the

VCR. (Refer to the VCR owner`s manual.)

3. Select the input source with using the INPUT button on

the remote control, and then press / button to select the

source, press the OK button to confirm.