PLASMA TV USER MANUAL Please READ this manual carefully before operating your TV, and retain it for future reference.
WARNING RISK ELECTRIC SHOCK DO NOT OPEN WARNING : To reduce the risk of electric shock do not remove cover or back. No user-serviceable parts inside refer service to qualified service personnel. Operator Safety has been taken into consideration at the design and manufacture phase, but inappropriate operation may cause electric shock or fire. To prevent the product from being damaged, the following rules should be observed for the installation, use and maintenance of the product.
IMPORTANT SAFETY INSTRUCTIONS Read all of the instructions before using this appliance. When using this appliance, always exercise basic safety precautions, including the following: 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings. Install in accordance with the manufacturer`s instructions.
SAVE THESE INSTRUCTIONS Thank you for purchasing the Haier product. This easy-to-use manual will guide you in getting the best use of your product. Remember to record the model and serial number. They are on label in back of the unit. Model number Serial number Date of purchase Staple your receipt to your manual. You will need it to obtain warranty service.
Contents Warning…………………………….. …………………………....……………….……………....……………………………..…………2 Important Safety Instructions ……………………………..……………………...………..…………………………….. ………………3 Save These Instructions…………………………….. …………………………..….. …………………………………………….. ……4 Controls …………………………….. …………………………….. …………….……………………………….. ………………………5 Connection Options…………………………….. ……………………………….……………………………….. ………………………7 Universal Remote Control…………………………….. ………………………………………………………….. …………………….8 Accessories…………………………….. …………………………………………………………..
Controls This is a simplified representation of front panel. Here shown may be somewhat different from your TV. Front panel controls 1 INPUT: 2 MENU: 3 CH-/+ : 4 5 Press to show the input source mode. In the MENU/INPUT screen, these buttons serve as ENTER buttons. Menu display. Press to scan through channels. To scan quickly through channels, press and hold down either +/- . In the MENU screen, these buttons serve as Ÿ/ź buttons. VOL -/+ : Press to adjust the volume .
Connection options Back panel controls 1 8 1 2 3 4 5 6 7 8 9 10 9 2 3 10 4 11 5 12 6 13 7 14 15 16 YPbPr 1-Left Audio In YPbPr 2-Left Audio In CVBS & S-Video Left Audio In YPbPr 1-Y in YPbPr 1-Pb In YPbPr 1- Pr In CVBS In YPbPr 1-Right Audio In YPbPr 2-Right Audio In CVBS & S-Video Right Audio In 11 12 13 14 15 16 17 18 19 20 7 17 18 19 20 YPbPr 2-Y in YPbPr 2-Pb In YPbPr 2- Pr In PC- Audio In PC-RGB In HDMI 1 In HDMI 2 In S-Video In Coaxial output terminal TV signal In
Universal Remote Control The remote control cannot be operated unless the batteries are properly loaded. When using the remote control, aim it at the remote control sensor on the TV. Fonctions introduction 1 POWER Press toturn on and off the TV 2 MUTE Switches the sound on or off. 3 Numeric buttons Press to change the channel. 4 - Button Press to select additional channels (digital) being broadcast by the same station. For example, to select channel “54-3”, press “54”, then press “-” and “3”.
Accessories Remote control Attention Card User manual Power cable Quick Start Guide(English Version) 9 Quick Start Guide(French Version)
Antenna Connection Generally speaking, to enjoy a clearer picture,we recommand that you use a CATV system or an outdoor antenna. Over-the-air TV reception quality will depend on your antenna type,antenna location and antenna positioning.
External Equipment Connections NOTE: All cables shown are not included with the TV. Choose Your Connection There are several ways to connect your television, depending on the components you want to connect and the quality of the signal you want to achieve. The following are examples of some different ways to connect your TV with different input sources. VCR connection To avoid picture noise (interference), leave an adequate distance between the VCR and TV.
External A/V Source Setup How to connect Connect the audio and video cables from the external equipment's output jacks to the TV input jacks, as shown in the figure. When connecting the TV to external equipment, match the jack colors (Video = yellow, Audio Left = white, and Audio Right = red). How to use 1. Select the input source with using the INPUT button on the remote control. 2. Press the / button to select the desired source. 3. Press the OK button to confirm. 4.
DTV connection HDMI This TV can receive Digital Over-the-air/Cable signals without an external digital set-top box. However, if you do receive Digital signals from a digital set-top box or other digital external device, refer to the figure as shown below. This TV supports HDCP (High-bandwidth Digital How to connect Use the TV`s COMPONENT , PC or HDMI/DVI jack for video connections, depending on your set-top box connector. Then, make the corresponding audio connections. How to use 1.
HDMI When the source device(DVD player or Set Top Box) supports HDMI How To Connect 1. Connect the source device to HDMI port of this TV with an HDMI cable(not supplied with this product). 2. No separated audio connection is necessary. How To Use If the source device supports Auto HDMI function, the output resolution of the source device will be automatically set to 1280x720p. If the source device does not support Auto HDMI, you need to set the output resolution appropriately.
Cable sample 15
Power source TO USE AC POWER SOURCE Use the AC polarized line cord provided for operation on AC. Insert the AC cord plug into a standard polarized AC outlet. Note Never connect the AC line cord plug to other than the specified voltage. Use the attached power cord only. If the polarized AC cord does not fit into a nonpolarized AC outlet, do not attempt to file or cut the blade. It is the user`s responsibility to have an electrician replace the obsolete outlet.
Operation In the manual, the OSD ( on screen display ) may be different from your TV’s, because it is just an example to help you with the TV operation. There are several options you might need to set up in order for your TV to work properly. Read the instruction that follow. Switching On/Off the TV set 1. First, connect power cord correctly. 2. Select the viewing source by using INPUT button on the remote control. 3. When finished using the TV,press the POWER button on the remote control.
Menu Operation Basic operation Turningthe TURN ON LCD TV 1. Connecting to the AC input cable then press the main power switch to switch ON LCD TV. At this time the TV will enter standby mode and indicator show red. 2. Use POWER button can turn ON LCD TV from standby mode TURN OFF LCD TV button on the remote control to enter standby mode. The indicator is red. 1. Press POWER button or 2. Using main power switch turns off LCD TV completely.
1. Press VOL+/- to adjust the volume. 2. If you want to switch the sound OFF, press the MUTE 3. You can cancel this function by pressing MUTE or VOL+/ VOL-. - Press the MENU button to display the main menu. - Use Ÿ/ź/Ź/Ż buttons to select and adjust the available menus. The OSD (On Screen Display) function enables you to adjust the screen status conveniently since it provides graphical presentation.
1. z Using the CH+/CH- on the front panel or on the remote control. Press CH+ to increase channel number. z Press CH - to decrease channel number. 2. Using 0-9 digital buttons and - button You can select the channel number by pressing 0 to 9 and pressing ENTER to confirm you selection. Press the - button to enter a program number for multiple program channel. 3. Example: To select 1-digit channel (e.g. Channel 5): Press the 5 and ENTER button. To select 2-digit channel (e.g.
Press the MENU on the front panel or on the remote control and then use Ż/Ź and Ź /ENTER to select the Picture menu. 1.Press Ź/ENTER to enter the picture menu 2. Press Ÿ/ź button to move the cursor to the item to be selected. 3 .Use Ź/ENTER button to select what you want to adjust in the Picture menu 4. PressŻ/Ź button to adjust. 5. When you are satisfied with your adjustment, press MENU or EXIT to exit the main menu.
Audio Mode You can select the type of sound which best corresponds to your listening requirements by selecting Sound in SOUND menu. Press ENTER button to select one of the audio mode such as User/Voice/Concert/Jazz. Also,you may select the it directlyby pressing the SMODE button on the remote control. Only you select User, the Bass /Treble are operable.
Add On Ch Search When the channels are found, useŻ/Ź to add new channels to the channel list. Manual Ch Set Press ENTER button to display a channel list that you can select channel as below: Channel labels Allows you to name the channel that is selected.
Manual Language Press ENTER key to select language of the OSD such as English/ French and Espanol. Reset Press ENTER to return to the default set. Feature menu options Press MENU on the front panel or on the remote control and then use Ż/Ź and ENTER to select the Feature menu. 1.Press Ź/ENTER to enter the Feature menu 2. Press Ÿ/ź button to move the cursor to the item to be selected. 3 .Use Ź/ENTER button to select what you want to adjust in the Feature menu 4. PressŻ/Ź button to adjust. 5.
Advanced Video Menu Press OK to enter the advanced video menu as below: - Noise Reduction--Spatial: pressŻ/Ź to select on or off. - Noise Reduction--Speckle: press Ż/Ź to select on or off. - Noise Reduction--Temporal: pressŻ/Ź to select on or off. - Auto Contrast Enhancement: press Ż/Ź to select on or off. - Color Temperature: pressŻ/Ź to select one of Normal/Cool and Warm. - 3D Y/C: press Ż/Ź to select on or off.
Digital Closed Captions This item allows you to set the closed caption, and press ENTER to enter Closed Caption Options menu as below: - Style: pressŻ/Ź to select one of Automatic and Custom, when you select automatic, the others are disable and can not be adjusted. - Size: press Enter to select one of Normal/Large and Small. - Font: press Enter to select one of Default and from Font1 to Font7. - Text Color: press Enter to select one of Red/Green/Blue/Yellow/Magenta/Cyan/Black and White.
VGA Set Press Ÿ/ź button and then use ENTER to enter the VGA set menu as below: H-Pos Press Ÿ/ź button and then use Ż/Ź adjust the horizontal position of the picture. V-Pos Press Ÿ/ź button and then use Ż/Ź adjust the vertical position of the picture. Phase Press Ÿ/ź button and then use Ż/Ź to adjust the phase of the picture. Clock PressŸ/źbutton and then useŻ/Ź to adjust the clock of the picture.
Feature menu options in Component Press MENU on the front panel or on the remote control and then use Ÿ/ź and Ź/ENTER to select the Feature menu in YpbPr mode. 1.Press Ź/ENTER to enter the Feature menu 2. Press Ÿ/ź button to move the cursor to the item to be selected. 3 .Use Ź/ENTER button to select what you want to adjust in the Feature menu 4. PressŻ/Ź button to adjust. 5. When you are satisfied with your adjustment, press MENU or EXIT to exit the main menu.
Sleep Timer Press Ż/Ź button to select the amount of time before your TV turn off automatically and press the ENTER that can select the 30 min/60min/90min and OFF. Advance Video Menu Press ENTER to enter the advance video menu. Feature menu options in S-Video and Composite Rear Press MENU on the front panel or on the remote control and then use Ÿ/ź and ENTER to select the Feature menu in S-Video mode. 1.Press Ź/ENTER to enter the Feature menu 2.
Maintenance Early malfunctions can be prevented. Careful and regular cleaning can extend the amount of time you will have your new TV. Be sure to turn the power off and unplug the power cord before you begin any cleaning. Cleaning the Screen 1. Here’s a great way to keep the dust off your screen for a while. Wet a soft cloth in a mixture of lukewarm water and a little fabric softener or dish washing detergent. Wring the cloth until it`s almost dry, and then use it to wipe the screen. 2.
Product Specification Items Relevant illustrations Screen size, visible Screen format Display area Resolution Maximum contrast ratio Maximum brightness Display colors 1,500 cd/m² 16.7M 160° (Horizontal) / 160° (Vertical) / 70,000 hours 1155*390*880mm Weight (net) Appro109.17LB include power supply.
Troubleshooting For the sake of time and cost, it is strongly recommended that you check out the problem by yourself according to the instructions listed hereunder before contacting the after-sales service for technical assistance. No picture, no sound Verify if the television is properly plugged. Verify if the television is properly supplied power. Verify if electricity is available. Blank screen Verify if correct signals are input. Press INPUT button to change signal input to TV input.
