User`s guide

12 VISIONEER STROBE XP 300 SCANNER USER’S GUIDE
STEP 2: CONNECT AND CALIBRATE THE SCANNER
Your Visioneer scanner connects to any available USB port. Check your
computer’s manual for USB port locations.
CONNECT THE SCANNER
1. Using the on-screen window as your guide, plug the AC adaptor
cable into the power jack on scanner, and then plug the AC adapter
into an electrical outlet.
2. Plug the USB cable into the USB port on your scanner and then
plug the other end into any USB port on your computer.
Connection to a USB 2.0 High Speed port provides optimum
performance, but your scanner can also connect to a USB 1.1 port.
The USB symbol identifies the location of the USB port on your
computer. If the plug does not attach easily, make sure that you are
plugging it in correctly. Do not force the plug into the connection.
Note: You can connect the scanner to your computer while the
computer is running. You do not have to shut down your computer.
Note: You can also connect the scanner to a USB hub if the hub has
its own power supply plugged into an electrical outlet.