User`s guide

16 VISIONEER STROBE XP 470 SCANNER USER’S GUIDE
STEP 3: CONNECT AND POWER ON THE SCANNER
Connect the power supply and power cord, and then turn the power on.
To c o n n e c t your Visio n e e r Strobe XP 470 scanner:
1. Plug the power supply into the power port on the scanner.
2. Plug the power cord into the power supply and into a wall outlet.
Note: Only use the power supply (SA60-24 made by Sino-American)
included with your scanner. Connecting any other type of power
supply may damage your scanner, and will void its warranty.