User`s guide

Getting Documents
5. Click Auto OCR.
Pro OCR begins getting pages.
If the Enable Auto OCR Dialogs processing option is not selected, scanning is
completed. Pro OCR begins locating and then recognizing.
If the Enable Auto OCR Dialogs processing option is selected, Pro OCR asks
for additional pages to scan.
6. If you want to scan another stack of pages, place the next stack of pages in the
ADF.
Pro OCR scans the additional pages in the ADF and displays the dialog box
again, asking for additional pages to scan. If you need to scan the second side
of a stack of double-sided pages, see the next procedure,
“To scan the second
side of double-sided pages:.”
Repeat this step for as many additional stacks of pages as you want to scan.
7. If you’ve scanned all the pages you need for this job, click End.
Scanning is completed. Pro OCR displays the first page of the scanned stack,
in the image view. Pro OCR then begins locating and recognizing.
To scan the second side of double-sided pages:
1. When you’re finished scanning the first side, turn the entire stack of pages in
the ADF over and replace them in the ADF.
Make sure that you don’t change the order of pages, and that you replace them
in the proper orientation. If your double-sided document contains more pages
than your ADF can handle, you’ll need to separate the document into smaller
stacks. After scanning the first side of a smaller stack, scan the flip side of the
same stack before continuing with the next stack.
2. Click Flip in the dialog box that appears.
Pro OCR scans the second side of each page using the current brightness,
page size, orientation, and scanning resolution settings.
3. When you’re finished, click End.
file:///C|/VisioneerDoc/html/03get.htm (9 of 16) [1/20/2003 4:21:17 PM]