User`s guide

Getting Documents
7. If you want to get additional pages, place another page on the flatbed.
Pro OCR scans the additional page on the flatbed and displays the dialog box
again, asking for the next page. Repeat this step for as many additional pages
that you want to scan.
8. If you do not want to scan more pages, click End.
Scanning is completed. Pro OCR displays the page you’ve scanned in the
image view. Pro OCR then begins locating and then recognizing.
Using Auto OCR With a Scanner with an ADF
Complete the following procedure to use Auto OCR with scanners that have an ADF.
NOTE: To use an ADF scanner with Pro OCR, you need the Pro OCR ISIS upgrade.
For more information, visit Visioneer’s Web site at
www.Visioneer.com.
To automatically process one or more pages with a scanner that has an ADF:
1. Make sure you have set scan options as described in
“Setting Scanning
Options,” previously in this document, and select Use Scanner from the Get
Page drop-down list.
2. Place one or more pages in the ADF.
Make sure the pages are oriented correctly for your scanner and the page
orientation you have selected in the Gallery.
3. To scan more than one page, choose Options from the Tools menu, click the
Processing tab, and then select the Enable Auto OCR Dialogs processing
option.
4. Check the Locate and Recognize options to make sure they are set the way
you want them.
file:///C|/VisioneerDoc/html/03get.htm (8 of 16) [1/20/2003 4:21:17 PM]