User`s guide

Step 2: Installing the PaperPort Software
7
7. Plug the other end of the power adapter cable into an AC outlet and
listen for a short, high-pitched hum as you plug the power adapter
into the outlet. The sound indicates that the scanner is receiving
power.
8. Find a convenient place on your desk on which to place the scanner.
9. Restart your Macintosh computer. As soon as your computer restarts,
you are ready for software installation.
S TEP 2: I NSTALLING THE P APER P ORT S OFTWARE
The PaperPort Installer program places all the PaperPort software you
need on your Macintosh computer. Make sure that you turn off any
antivirus software and screen savers before you start the installation.
▼
NOTE: If your computer does not have a CD-ROM, request
installation disks from Visioneer, as described by the information on
the CD-ROM envelope.
To install the PaperPort software from the CD:
1. Insert the CD into the CD-ROM drive.
2. Double-click the
Installer icon to start the installation.
3. Follow the instructions that appear on the screen to install the
software. (The serial number required to complete the installation is
listed on the PaperPort CD sleeve or disk.)
TIP: You can purchase a pedestal for your scanner. See
the coupon that came in the box with your scanner.