User`s guide

PaperPort Strobe for Macintosh Installation Guide
4
The Scanner (Continued)
S TEP 1: C ONNECTING THE P APER P ORT S TROBE SCSI
C
ABLE AND S CANNER
The Strobe SCSI cable is an easy-to-install SCSI device you use to
connect your scanner to the SCSI port of your Macintosh computer.
▼ NOTE: To use the Strobe SCSI cable with a PowerBook or DuoDock
computer, you must first plug an HDI-30/DB-25(f) adapter into the
SCSI port. See your computer dealer for information about an
HDI-30/DB-25(f) adapter.
1
Scanner button. Press the button before scanning as a shortcut for choosing new scan settings.
Press the button to cancel a scan in progress. If the paper jams, press the button to back the
paper out.
Page markers. Insert items to scan between these two elevated tabs.
Page feed. Insert items to scan face up into the page feed. The feed mechanism grabs the item
and pulls it the rest of the way through. The PaperPort application automatically starts.
Paper return. Rotate the paper return forward or backward to set the paper output path
(straight through or return to front).
Paper-return settings. Rotate the paper return to align either setting with the arrow on the
scanner body.
PaperPort Strobe SCSI cable port. Plug the SCSI cable into this port.
6
5
4
3
2
▼ NOTE: The scanner does not have an on/off switch. It is always ready
for you to scan an item. Simply inserting the item into the page feed
starts the scanner.