Installation guide
Table Of Contents
- Table of Contents
- Welcome
- What’s in the Box
- The Visioneer 9020 USB Scanner
- What You Need
- STEP 1: Installing the PaperPort Software
- STEP 2: Connecting the Scanner
- STEP 3: Checking Out Your Scanner
- Three Ways to Scan Paper Items
- Scanning Paper Items with the OneTouch Buttons
- Scanning Paper Items from the Button Panel on the Screen
- Scanning 35mm Slides and Negatives
- Configuring the Scanner
- Scanning from the PaperPort Software
- Adjusting the Settings on the Scan Manager Pro
- Troubleshooting
- Cleaning the Scanner Glass
- How to Uninstall Your Scanner
- Contacting Visioneer America Technical Support
- Contacting Visioneer—International Technical Support
- Visioneer PhotoPort 9020 USB Scanner Specifications
STEP 1: I
NSTALLING
THE
P
APER
P
ORT
S
OFTWARE
5
Installing
This section of the guide explains how to connect your Visioneer 9020
scanner to a USB 1.1 or USB 2.0 port.
The PaperPort CD includes all the necessary installation files, as well as
the PaperPort software files and other software files.
STEP 1: I
NSTALLING
THE
P
APER
P
ORT
S
OFTWARE
To install the PaperPort software:
1. Start your computer and make sure that no other applications are
running.
2. Insert the PaperPort CD into your computer’s CD-ROM drive.
The CD automatically starts.
Note
: You must install the PaperPort software
before
connecting the
scanner to the computer. Otherwise the correct software to run your
scanner will not be installed and it may not scan properly.