Installation guide
Table Of Contents
- Table of Contents
- Welcome
- What’s in the Box
- The Visioneer 9020 USB Scanner
- What You Need
- STEP 1: Installing the PaperPort Software
- STEP 2: Connecting the Scanner
- STEP 3: Checking Out Your Scanner
- Three Ways to Scan Paper Items
- Scanning Paper Items with the OneTouch Buttons
- Scanning Paper Items from the Button Panel on the Screen
- Scanning 35mm Slides and Negatives
- Configuring the Scanner
- Scanning from the PaperPort Software
- Adjusting the Settings on the Scan Manager Pro
- Troubleshooting
- Cleaning the Scanner Glass
- How to Uninstall Your Scanner
- Contacting Visioneer America Technical Support
- Contacting Visioneer—International Technical Support
- Visioneer PhotoPort 9020 USB Scanner Specifications

38 VISIONEER 9020 USB SCANNER INSTALLATION GUIDE
To scan automatically:
1. Click AutoScan.
The scanner uses your preselected resolution setting for the
configuration you selected. See “Setting Preferences” on page 54 to
set the AutoScan settings.
In addition, your OneTouch 9020 scanner has built-in image
analysis capabilities that find the optimum combination of settings
for the item you’re scanning. When you click AutoScan, the scanner
analyzes the image and adjusts the settings to produce the optimal
scanned image.
The following dialog box appears while the scan is in progress.
Checkmarks indicate that phase of the process is finished.
Thumbnail
image
Bitmap icon