Installation guide
Table Of Contents
- Table of Contents
- Welcome
- What’s in the Box
- The Visioneer 9020 USB Scanner
- What You Need
- STEP 1: Installing the PaperPort Software
- STEP 2: Connecting the Scanner
- STEP 3: Checking Out Your Scanner
- Three Ways to Scan Paper Items
- Scanning Paper Items with the OneTouch Buttons
- Scanning Paper Items from the Button Panel on the Screen
- Scanning 35mm Slides and Negatives
- Configuring the Scanner
- Scanning from the PaperPort Software
- Adjusting the Settings on the Scan Manager Pro
- Troubleshooting
- Cleaning the Scanner Glass
- How to Uninstall Your Scanner
- Contacting Visioneer America Technical Support
- Contacting Visioneer—International Technical Support
- Visioneer PhotoPort 9020 USB Scanner Specifications
22 VISIONEER 9020 USB SCANNER INSTALLATION GUIDE
CONFIGURING THE SCANNER
When you first connect your scanner to a computer, the scanner’s
software configures each OneTouch button with appropriate settings.
But, if you want to change the settings, you can reconfigure the buttons
by selecting new options from the Configuration dialog box. You
display the Configuration dialog box from either the shortcut menu or
the Button Panel.
To display the Configuration dialog box from the shortcut menu:
1. Right-click the scanner icon.
The shortcut menu appears.
2. Choose Configure on the shortcut menu.
The Configuration dialog box appears. Click the tab that
corresponds to the button you want to configure.
Scanner icon