Installation guide
Table Of Contents
- Table of Contents
- Welcome
- What’s in the Box
- The Visioneer 9020 USB Scanner
- What You Need
- STEP 1: Installing the PaperPort Software
- STEP 2: Connecting the Scanner
- STEP 3: Checking Out Your Scanner
- Three Ways to Scan Paper Items
- Scanning Paper Items with the OneTouch Buttons
- Scanning Paper Items from the Button Panel on the Screen
- Scanning 35mm Slides and Negatives
- Configuring the Scanner
- Scanning from the PaperPort Software
- Adjusting the Settings on the Scan Manager Pro
- Troubleshooting
- Cleaning the Scanner Glass
- How to Uninstall Your Scanner
- Contacting Visioneer America Technical Support
- Contacting Visioneer—International Technical Support
- Visioneer PhotoPort 9020 USB Scanner Specifications
SCANNING 35MM SLIDES AND NEGATIVES 21
3. Click Preview to preview the image and, if necessary, adjust the
various settings, then click Scan when the image is what you want.
See “Scanning an Item with the Twain Button” on page 35 for
details about scanning, and also see, “Adjusting the Settings on the
Scan Manager Pro” on page 40 for the steps to adjust the settings.
4. When you are finished scanning, remove the masks from the
scanner glass and store them in their protective bag.
5. Choose Scan Reflective Using: from the Scan Manager Pro’s drop-
down menu to reset for scanning paper items.
That setting turns off the transparency light in the document cover.
6. If you adjusted the resolution and other settings for scanning slides
or film, reset those settings for scanning paper items.
Click the drop-down arrow and
choose the transparency scanning
option from this menu,
The option “Scan Reflective Using”
is for scanning paper items, not
slides or negatives.
Tip: Set the resolution to 1200dpi or better when scanning your
slides and negatives. See the section, “Adjusting the Resolution and
Sharpness” on page 43 for the steps to set the resolution.