Installation guide
Table Of Contents
- Table of Contents
- Welcome
- What’s in the Box
- The Visioneer 9020 USB Scanner
- What You Need
- STEP 1: Installing the PaperPort Software
- STEP 2: Connecting the Scanner
- STEP 3: Checking Out Your Scanner
- Three Ways to Scan Paper Items
- Scanning Paper Items with the OneTouch Buttons
- Scanning Paper Items from the Button Panel on the Screen
- Scanning 35mm Slides and Negatives
- Configuring the Scanner
- Scanning from the PaperPort Software
- Adjusting the Settings on the Scan Manager Pro
- Troubleshooting
- Cleaning the Scanner Glass
- How to Uninstall Your Scanner
- Contacting Visioneer America Technical Support
- Contacting Visioneer—International Technical Support
- Visioneer PhotoPort 9020 USB Scanner Specifications
SCANNING 35MM SLIDES AND NEGATIVES 19
2. To scan a 35mm slide, first position the 35mm mask on the glass.
The mask has one square corner. Align that corner with the arrow
on the scanner body.
Make sure that the text on the 35mm mask faces up so the slide fits
properly in the mask.
Follow the directions on the mask and place the 35mm slide
horizontally into the slide holder.
Notice that the mask has a narrow slot above the 35mm slide
holder. That slot is for calibration to assure that you get the best
possible scan results. Do not place items to be scanned in the
calibration slot.
Calibration slot