Installation guide
Table Of Contents
- Table of Contents
- Welcome
- What’s in the Box
- The Visioneer 9020 USB Scanner
- What You Need
- STEP 1: Installing the PaperPort Software
- STEP 2: Connecting the Scanner
- STEP 3: Checking Out Your Scanner
- Three Ways to Scan Paper Items
- Scanning Paper Items with the OneTouch Buttons
- Scanning Paper Items from the Button Panel on the Screen
- Scanning 35mm Slides and Negatives
- Configuring the Scanner
- Scanning from the PaperPort Software
- Adjusting the Settings on the Scan Manager Pro
- Troubleshooting
- Cleaning the Scanner Glass
- How to Uninstall Your Scanner
- Contacting Visioneer America Technical Support
- Contacting Visioneer—International Technical Support
- Visioneer PhotoPort 9020 USB Scanner Specifications
10 VISIONEER 9020 USB SCANNER INSTALLATION GUIDE
7. Click the Finish button.
The scanner’s status light is green when the scanner and computer
are communicating properly.
That completes the steps to connect your scanner to the computer.
8. Click Yes, I want to restart my computer now.
9. Click Finish.
Your computer restarts and your scanner is now ready to scan.
10. If you removed the CD from the CD drive and want to install other
software, reinsert the CD into the drive.
Remove the CD from the computer when you’re finished and store
it in a safe place.
GETTING THE PAPERPORT SOFTWARE USER’S GUIDE
The Installation CD also includes your ScanSoft PaperPort User’s Guide.
This guide provides more detailed information about the PaperPort
software’s features. Please see the CD to view or print the guide.