Installation guide
Table Of Contents
- Table of Contents
- Welcome
- What’s in the Box
- The Visioneer 9020 USB Scanner
- What You Need
- STEP 1: Installing the PaperPort Software
- STEP 2: Connecting the Scanner
- STEP 3: Checking Out Your Scanner
- Three Ways to Scan Paper Items
- Scanning Paper Items with the OneTouch Buttons
- Scanning Paper Items from the Button Panel on the Screen
- Scanning 35mm Slides and Negatives
- Configuring the Scanner
- Scanning from the PaperPort Software
- Adjusting the Settings on the Scan Manager Pro
- Troubleshooting
- Cleaning the Scanner Glass
- How to Uninstall Your Scanner
- Contacting Visioneer America Technical Support
- Contacting Visioneer—International Technical Support
- Visioneer PhotoPort 9020 USB Scanner Specifications
STEP 2: C
ONNECTING
THE
S
CANNER
7
STEP 2: C
ONNECTING THE SCANNER
Your OneTouch 9020 scanner connects to any available USB 1.1 or
USB 2.0 port. Check your computer’s user’s guide for its USB port
locations.
To connect the Visioneer 9020 scanner to a USB 1.1 or USB 2.0
port:
1. Turn the scanner over to see the locking tab on the bottom. Slide
the locking tab to the unlocked position.
Note: You do not have to shut off the power to your computer when
connecting the scanner to a USB port.
Note: The locking tab protects the scanner’s scan head by holding it
securely in position. Lock the scanner when transporting it from one
location to another, but always remember to unlock it before
scanning. The scanner will not scan when locked.
Unlocked position