Visioneer® OneTouch® 7300 Scanner FOR USB CONNECTION Installation Guide
COPYRIGHT INFORMATION Copyright © 2003 Visioneer, Inc. Reproduction, adaptation, or translation without prior written permission is prohibited, except as allowed under the copyright laws. The Visioneer brand name and logo, and the OneTouch name are registered trademarks of Visioneer, Inc. The PaperPort brand name and logo are registered trademarks of ScanSoft, Inc. Microsoft is a U.S. registered trademark of Microsoft Corporation. Windows is a trademark of Microsoft Corporation.
TABLE OF CONTENTS i TA B L E O F C O N T E N T S Welcome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 What’s in the Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 The Visioneer 7300 USB Scanner . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 What You Need . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ii TABLE OF CONTENTS Adjusting the Brightness and Contrast . . . . . . . . . . . . . . . . . . . . 42 Adjusting Gamma, Saturation, and Color Hue . . . . . . . . . . . . . 44 Adjusting Output Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46 Saving a Custom Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 The Scan Info Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51 Zooming In and Out . . . . . . . . . . . . . . . . . . . . . . . .
WELCOME Congratulations on purchasing your Visioneer OneTouch 7300 USB scanner. With this scanner you can quickly scan paper items such as letters, forms, photos, and magazine articles and place their electronic images on your computer. With its innovative hinged lid, you can also lay books flat on the scanner to scan pages. WHAT’S IN THE BOX Before starting the installation, check the contents of the box to make sure that all parts are included.
2 VISIONEER ONETOUCH 7300 USB SCANNER INSTALLATION GUIDE THE VISIONEER 7300 USB SCANNER Document cover Glass Reference marks OneTouch button panel Status light OneTouch buttons USB port
THE VISIONEER 7300 USB SCANNER 3 Document cover—Protects the document from light and contamination. Glass—Items are placed face down aligned at the reference marks. Reference marks—Marks on the border of the glass show where to align various paper sizes. OneTouch button panel—Allows scanning directly from the scanner. Status light—Shows the scanner’s status. Steady green light: scanner is ready to scan. Blinking green light: scanner is busy. USB port—Connects the scanner to the computer.
4 VISIONEER ONETOUCH 7300 USB SCANNER INSTALLATION GUIDE WHAT YOU NEED An IBM-compatible Pentium PC with: ■ A CD-ROM drive ■ An available Universal Serial Bus (USB) port; 1.1 or 2.
STEP 1: INSTALL THE SOFTWARE 5 Installing Installation is a quick, three-step process: ■ Install the software ■ Connect the scanner ■ Check out your scanner STEP 1: INSTALL THE SOFTWARE Note: You must install the PaperPort software before connecting the scanner to the computer. Otherwise the correct software to run your scanner will not be installed and it may not scan properly. To install the software: 1. Start Microsoft Windows and make sure no other applications are running. 2.
6 VISIONEER ONETOUCH 7300 USB SCANNER INSTALLATION GUIDE 3. On the installation menu, select Install ScanSoft PaperPort and Scanner Driver. If a message asks you to restart your computer, click Restart. 4. On the PaperPort 8.0 SE Setup window, click Next. 5. Read the ScanSoft license agreement. If you accept the terms, select I accept the terms in the license agreement, and then click Next. 6. On the User Information window, accept the current information or enter new information, and then click Next. 7.
STEP 2: CONNECT THE SCANNER 7 13. When you see this Connect Scanner window, do NOT click Finish. Leave the window open and proceed to the next section, “Step 2: Connect the Scanner”. STEP 2: CONNECT THE SCANNER Your OneTouch 7300 scanner connects to any available USB 1.1 or USB 2.0 port. Check your computer’s user guide for port locations. Note: You do not have to shut off the power to your computer when connecting the scanner to a USB port.
8 V ISIONEER O NETOUCH 7300 USB S CANNER INSTALLATION G UIDE If the plug does not attach easily, make sure that you are plugging it in correctly. Do not force the plug into the connection. 2. Plug the computer end of the USB cable into a USB port on your computer. USB Also make sure that the USB plug attaches easily to your computer’s USB port. The status light on the front of the scanner is illuminated, indicating the scanner is receiving power.
STEP 2: CONNECT THE SCANNER 9 3. When the software is finished loading, return to the Connect Scanner window and click Finish. The scanner’s status light is green when the scanner and computer are communicating properly. 4. On the Install Completed window, click Finish. 5. Restart your computer. After your computer restarts, your scanner is ready to scan. 6.
10 VISIONEER ONETOUCH 7300 USB SCANNER INSTALLATION GUIDE STEP 3: CHECK OUT YOUR SCANNER After installing the scanner and software, you will see a scanner icon on the Windows taskbar (at the bottom right corner of the computer screen). If the scanner is properly connected, the scanner icon looks like the one pictured below. Scanner Icon If the icon has a red X through it, the scanner is not properly connected.
STEP 3: CHECK OUT YOUR SCANNER 11 IF THE SCANNER IS NOT PROPERLY CONNECTED If the scanner icon on the Windows taskbar has a red “X” through it, the scanner is not properly connected. Check for one of these possible problems: • Is a cable loose or not plugged in securely? Inspect all cable connections. Make sure all the cables are plugged in securely. • Is the scanner’s status light on? If the status light does not come on, check that the USB cable is connected properly to the scanner and computer.
12 VISIONEER ONETOUCH 7300 USB SCANNER INSTALLATION GUIDE 2. Choose Connect from the shortcut menu. The software finds the scanner and makes the connection. The scanner icon will no longer have a red X through it, and you’re ready to begin scanning. If you try all the troubleshooting procedures described above and in the Readme file, and the scanner icon still has a red X through it, you may have a malfunctioning scanner. Please see the Visioneer Technical Support Card that you received with your scanner.
PRESSING A ONETOUCH BUTTON ON THE SCANNER 13 Scanning Your scanner offers three ways to scan a paper item: ■ Press a OneTouch button on the scanner ■ Click a button on the button panel ■ Click a button from the PaperPort software PRESSING A ONETOUCH BUTTON ON THE SCANNER Pressing a scanner button scans the item, and then sends the image to the destination associated with the button. To scan by pressing a OneTouch button on the scanner: 1. Place an item face down on the glass.
14 VISIONEER ONETOUCH 7300 USB SCANNER INSTALLATION GUIDE 2. Close the document cover and press one of the OneTouch buttons. The scanner starts scanning the item. Messages just above the Windows taskbar show the status of the scanning process. During scanning, the scan progress window shows a copy of the image, as illustrated here. When the scan is complete, the scanned image appears in the destination application. In this example, the destination application is the PaperPort desktop.
PRESSING A ONETOUCH BUTTON ON THE SCANNER 15 SCANNING PAGES IN A BOOK Your OneTouch 7300 USB scanner has an innovative hinged lid so you can lay books flat on the scanner glass to scan their pages. To scan book pages: 1. Open the document cover and place the book on the glass. 2. Align the edges of the pages with the reference marks. 3. Close the document cover. Notice how the hinge at the back of the document cover lifts up so cover lays flat on the book. 4.
16 VISIONEER ONETOUCH 7300 USB SCANNER INSTALLATION GUIDE ABOUT THE ONETOUCH BUTTONS The OneTouch buttons are preconfigured for typical scanning tasks. To change button settings, see “Configuring the Buttons” on page 26. The following table describes the preconfigured button settings: Button Preconfigured Settings Scan Scans the item as a color page and displays it in PaperPort. Custom Scans the item as a color photo and displays it in an image processing application.
SCANNING FROM THE BUTTON PANEL ON THE SCREEN 17 SCANNING FROM THE BUTTON PANEL ON THE SCREEN Scanning from the button panel on the screen works just like pressing a scanner button. The scanner scans the item, and then sends the image to the destination associated with the button. This method of scanning is especially helpful if the scanner is not located close to your computer. To scan from the button panel on the screen: 1. Place an item face down on the glass.
18 VISIONEER ONETOUCH 7300 USB SCANNER INSTALLATION GUIDE SCANNING FROM THE PAPERPORT SOFTWARE Instead of using a scanner button, you can scan directly from the PaperPort software. You can also scan directly with other software that meets the TWAIN standards for scanning, which includes many graphics and imaging applications. Refer to the user’s guides you received with those applications for their specific steps to scan.
SCANNING FROM THE PAPERPORT SOFTWARE 19 2. On the Windows taskbar, click Start, point to Programs, point to ScanSoft PaperPort 8.0, and then click PaperPort. The PaperPort desktop opens. 3. Click the Scan icon on the PaperPort command bar. The Folders pane is replaced by the Scan pane. 4. From the Scanner list, select Visioneer Scan Manager Pro. 5. In the “Scan what?” section, choose Document or Photograph. 6.
20 VISIONEER ONETOUCH 7300 USB SCANNER INSTALLATION GUIDE Click an icon to select a configuration—Color, Grey Scale, or Black&White. Clicking the “+” sign in front of Custom shows Custom’s scan settings. Click a setting in the list to change it. The setting’s options appear on the right side of the Scan Manager Pro where you can make changes if necessary. Check the Scan Info to make sure your computer has sufficient space for the image.
SCANNING FROM THE PAPERPORT SOFTWARE 21 Your Visioneer OneTouch 7300 scanner has built-in analytical capabilities that find the optimum combination of settings for the item you’re scanning. When you click AutoScan, the scanner analyzes the image and adjusts the settings to produce the optimal image. The Scanning dialog box opens while the scan is in progress. Check marks indicate the completion of a processing step. The image appears as a thumbnail on the PaperPort desktop. Thumbnail image 2.
22 VISIONEER ONETOUCH 7300 USB SCANNER INSTALLATION GUIDE To scan by previewing and adjusting settings manually: 1. On the left side of the Scan Manager Pro, select a configuration. For example, select Color Configurations and then select Custom to scan a color item with the preset Custom scan settings. The configuration settings appear as a list. Click the + (plus) sign to see the full list. Click the - (minus) sign to collapse the list. 2. Click the Preview button to preview the image before scanning.
SCANNING FROM THE PAPERPORT SOFTWARE 23 SCANNING FROM A COMPUTER RUNNING WINDOWS XP OR ME If your computer is running the Windows XP or ME operating system, you have a choice of scanning using the TWAIN-compliant Visioneer Scan Manager Pro software as just described (see page 18) or scanning using the Microsoft Windows Image Application (WIA) standard as described below. To scan an item: 1. Open the scanner cover and place an item face down on the glass.
24 VISIONEER ONETOUCH 7300 USB SCANNER INSTALLATION GUIDE 7. Click the Scan button in the Scan pane. The Scan using Visioneer OneTouch 7300 window opens. Use this window to select scanning options and start the scanner. 8. Select the button most appropriate for the item you’re scanning. To scan with the Custom Settings option see the next section, “Fine Tuning Your Scans”. 9. Click Preview to preview the image before scanning. The image is displayed on the right side of the window. 10.
SCANNING FROM THE PAPERPORT SOFTWARE 25 FINE TUNING YOUR SCANS You can select new settings before scanning to adjust how you want to scan a particular item. To select the scanner settings before you scan: 1. On the Scan using Visioneer OneTouch 7300 window, select the Custom Settings button, and then click Adjust the quality of the scanned picture. The Advanced Properties dialog box opens. 2. Select the options for scanning.
26 VISIONEER ONETOUCH 7300 USB SCANNER INSTALLATION GUIDE Configuring You can configure the default scanning settings for: ■ The buttons on the scanner and the button panel ■ The Visioneer Scan Manager Pro application (used when scanning from the PaperPort software) CONFIGURING THE BUTTONS When you first connect your scanner to a computer, the scanner’s software configures each OneTouch button with appropriate settings.
CONFIGURING THE BUTTONS 27 To open the Configuration dialog box from the button panel: 1. Click the scanner icon on the right side of the Windows taskbar. 2. On the button panel, right-click the button you want to configure. The Configuration dialog box opens. The tab for the scan button you clicked is selected. ABOUT THE CONFIGURATION DIALOG BOX The tabs across the top of the Configuration dialog box correspond to the buttons on the scanner and the button panel.
28 VISIONEER ONETOUCH 7300 USB SCANNER INSTALLATION GUIDE Click this tab to set preferences. Click the tab that corresponds to the scanner button you want to configure. Select a setting for scanning the item. Select a software application to send the scanned image to that application. Select format and page(s) options for the button. The options on the Configuration dialog box are: Select Destination—The list of applications that can open to display the scanned image.
CONFIGURING THE BUTTONS 29 Select Format and Page(s)—A set of options for selecting whether to scan a single page or multiple pages. The format is preset for PaperPort. Scan single page Scan multiple pages and stack them on the PaperPort desktop Scan multiple pages Options—Opens a dialog box for selecting options about the destination application for the scanned image. Each destination application has its own options dialog box.
30 VISIONEER ONETOUCH 7300 USB SCANNER INSTALLATION GUIDE 3. From the Select Configuration list, select a scanning configuration for the button. The configurations are preset for the application you select in the Select Application list. If you select another application, the configurations are for that application. 4. Select one of the Format and Page(s) options. 5. Click OK.
CONFIGURING THE BUTTONS 31 4. Do one of the following: ■ Click the New button. ■ Select a preset configuration and click the Copy button. 5. On the New Scan Configuration dialog box, type a name for the new configuration. ■ If you are copying from a preset configuration, leave the name as is or change it as required. 6. On the Scan Settings tab, set the scan settings as required. Mode—Select Black/White to scan in black and white.
32 VISIONEER ONETOUCH 7300 USB SCANNER INSTALLATION GUIDE 7. Click the Page Settings tab to set the scan page settings. Page Size—Click a page size from the drop-down list. The outlines on the picture represent the page sizes. Clicking one of the outlines also selects it as the page size for the scan. If you select the Custom option from the drop-down list, boxes appear in place of the picture. Enter horizontal and vertical page dimensions in the boxes.
CONFIGURING THE BUTTONS 33 Gamma—Drag the slider to improve how the colors in a scanned image look on your monitor. Gamma correction allows you to achieve precise color matching. Because the computer cannot always transmit the exact color information to the hardware, you may have to make some adjustments using the Gamma feature. The default Gamma setting works fine in most cases and normally does not need to be adjusted. 8.
34 VISIONEER ONETOUCH 7300 USB SCANNER INSTALLATION GUIDE ADJUSTING SCAN SETTINGS AND PAGE SETTINGS When scanning using a configuration you created yourself, you can adjust scan settings and page settings. For example, if the scanned image is too dark, you can adjust the brightness of the scan setting. Note: You cannot change the scan settings or page settings for any of the predefined scan configurations. You can only adjust settings for scan configurations that you create yourself.
CONFIGURING THE BUTTONS 35 The Edit Scan Configuration dialog box opens. 3. On the Scan Settings tab, adjust scan settings as required. 4. Click the Page Settings tab and adjust page settings as required. 5. When finished, click OK. 6. On the Configuration dialog box, click OK to save and apply the changes to the button. Note: If you selected the Copy button, the Edit Scan Configuration dialog box will have a Device tab for selecting options for a printer or copier.
36 VISIONEER ONETOUCH 7300 USB SCANNER INSTALLATION GUIDE SETTING PREFERENCES The preference settings are applied to each button and the scanner. To set preferences: 1. On the Configuration dialog box, select the tab for a button to set its preferences. 2. Click the Preferences tab on the Configuration dialog box. Preferences tab The OneTouch Preferences dialog box opens. The Button tab of the dialog box shows which button you selected for new preferences.
CONFIGURING THE BUTTONS 37 categories. For example, the destination applications for the email button are usually email applications. By selecting the Show All Destinations option as the preference for the email button, all the other types of applications are included in the list of email destination applications. Select Destinations—Select this option to individually choose the types of applications to include in the button’s list of destination applications.
38 VISIONEER ONETOUCH 7300 USB SCANNER INSTALLATION GUIDE Show Scanner Icon in Windows Taskbar—Select this option to see the small icon representing the OneTouch scanner in the Windows taskbar. Scanner icon Maintain Last Used Scanner Calibration—Check this box if you want your scanner to automatically recalibrate every fifteen minutes. The green status light begins blinking as the scanner recalibrates. Do not interrupt the calibration process.
ADJUSTING THE SETTINGS IN THE SCAN MANAGER PRO 39 ADJUSTING THE SETTINGS IN THE SCAN MANAGER PRO You can adjust the scan settings on the Visioneer Scan Manager Pro desktop to produce the best possible image for your needs. To adjust a setting: 1. Open the PaperPort desktop and then click the Scan icon to open the Scan Manager Pro. 2. On the left side of the Scan Manager Pro, select a configuration, for example, Color Configurations. 3.
40 VISIONEER ONETOUCH 7300 USB SCANNER INSTALLATION GUIDE Note: The list of scan settings for a configuration applies only to that type of configuration. For example, the Black&White configuration does not have a setting for adjusting the Color Hue. The following figure shows an example of the Scan Manager Pro if you click the Resolution setting in the list, or click the Resolution and Sharpen button.
ADJUSTING THE SETTINGS IN THE SCAN MANAGER PRO 41 ADJUSTING THE RESOLUTION AND SHARPNESS Resolution determines the amount of detail you can see in the scanned image. The resolution setting for the scan is in dots-per-inch (dpi). The higher the resolution, the finer the details, however, higher dpi settings also produce larger files sizes. Usually the higher resolution settings are used for precision work, such as photographs or fine artwork. Sharpness determines the amount of blur in an image.
42 VISIONEER ONETOUCH 7300 USB SCANNER INSTALLATION GUIDE To adjust the resolution and sharpness: 1. To use one of the preset resolutions for typical scanned items, click one of the options in the list. For example, to set the resolution for scanning a business card, select Business Card. That setting is preset to read small print on a typical business card. 2. To set the resolution manually, drag the Resolution slider to the left to decrease the resolution or to the right to increase it. 3.
ADJUSTING THE SETTINGS IN THE SCAN MANAGER PRO 43 The following figure shows the brightness and contrast options: To adjust the brightness and contrast: 1. Drag the Brightness slider to the left to make the item darker or to the right to make the item lighter. You can also type a number directly into the brightness setting box, or click the up and down arrows next to the box to increase or decrease the setting. 2.
44 VISIONEER ONETOUCH 7300 USB SCANNER INSTALLATION GUIDE For example, if you select Red from the menu and drag the Brightness and Contrast sliders, you can see how the red component of the histogram changes. Note, however, that the Green and Blue components also change relative to those new brightness and contrast settings. 3. Click the Auto button to have the scanner analyze the image and set the appropriate brightness and contrast.
ADJUSTING THE SETTINGS IN THE SCAN MANAGER PRO 45 The horizontal axis of the response curve represents the original settings of the image, and the vertical axis represents new settings. Thus, the curve is a straight line from the lower left to upper right for an original, unchanged image. To see how the response curve indicates changes, drag the Gamma slider to left and right. The following figure shows the color options: To adjust the color settings: 1.
46 VISIONEER ONETOUCH 7300 USB SCANNER INSTALLATION GUIDE changes its colors in response to the new curve. The x and y numbers at the bottom of the response curve indicate the exact position of the pointer on the curve. The Gamma slider remains fixed when you use the Freestyle option. 3. Drag the Gamma, Saturation, and Color Hue sliders to the left to decrease the settings or to the right to increase the settings.
ADJUSTING THE SETTINGS IN THE SCAN MANAGER PRO 47 The following figure shows the output size options: To Auto Trim an item: 1. Select Auto Trim, and then click the Trim button. The scanner senses the edges of the item on the glass and draws a dotted line around the image in the window. Check to make sure the dotted line encloses the image you want. A new Scan Info box on the lower left portion of the Scan Manager Pro shows the information for the autotrimmed area. 2.
48 VISIONEER ONETOUCH 7300 USB SCANNER INSTALLATION GUIDE To manually set the output size for an item: 1. To scan the entire item on the glass, click Same as Original. No sections are trimmed. 2. To set the output size yourself, click Same as Original to remove the checkmark. The settings for the output size become active. 3. Put the pointer on the image and drag the mouse to enclose the section you want in the scanned image.
ADJUSTING THE SETTINGS IN THE SCAN MANAGER PRO 49 A new Scan Info box on the lower left portion of the Scan Manager Pro shows the information for the new area. You can select multiple areas. A Scan Info box opens for each one. The following figure shows an example of a manually selected area. A new Scan Info box for the area selected on the image. The selected scan area. Note: When you manually select an area, the settings on the other panels are for that selected area, not the whole image.
50 VISIONEER ONETOUCH 7300 USB SCANNER INSTALLATION GUIDE 6. To rotate the selected area 90 degrees, click Rotate 90 Degrees. Then click Right or Left. 7. To maintain the selected area’s length-to-width relationship (known as the aspect ratio), click Maintain Aspect. Note that as you rotate the area or maintain its aspect ratio, the width and height measurements change to reflect the new orientation of the image. 8. When the settings are what you want, click Scan. 9.
ADJUSTING THE SETTINGS IN THE SCAN MANAGER PRO 51 THE SCAN INFO BOX The following figure shows the information on the Scan Info box: Physical size of the image to scan. Location of the top left corner of the image in the Preview window. Current location of the pointer as you drag it on the Preview window. Size of the file of the scanned image The space on your computer’s hard drive. ZOOMING IN AND OUT Enlarge or reduce the preview image by zooming in or out. To enlarge and reduce the preview image: 1.
52 VISIONEER ONETOUCH 7300 USB SCANNER INSTALLATION GUIDE SETTING SCAN MANAGER PRO PREFERENCES You can set preferences for the Scan Manager Pro and scanner that are independent of the preferences for the PaperPort software. To set the Scan Manager Pro preferences: 1. Click the Preferences button. The User Preferences dialog box opens. 2.
ADJUSTING THE SETTINGS IN THE SCAN MANAGER PRO 53 ■ Show standard metric paper sizes—Select this option if you use metric paper to print images. When you select the scan size output options, the width and height dimensions are then for metric paper sizes. ■ Show standard US paper sizes—Select this option to set the paper sizes for standard US paper. ■ Units—Select the measurement units for the ruler around the preview window. The x and y coordinates of the pointer position are relative to the units.
54 VISIONEER ONETOUCH 7300 USB SCANNER INSTALLATION GUIDE The Save Profile dialog box opens. 3. Type a name for the new profile and select desired options: ■ Store the custom output image size in this Profile—You can create a custom image size as part of the settings; if you adjusted the output image size for the selected configuration, that output image size is saved with this profile. See “Saving a Custom Size” on page 50 for more about a custom image size.
RECALIBRATING THE SCANNER 55 Maintenance This section contains information about recalibrating the scanner, cleaning, uninstalling, and scanner specifications. RECALIBRATING THE SCANNER If the scanned images are not as sharp as earlier scans, the scanner may need to be recalibrated. To recalibrate the scanner: 1. On the Windows taskbar, click Start, point to Programs, point to ScanSoft PaperPort 8.0, and then click Scanner Calibration. 2.
56 VISIONEER ONETOUCH 7300 USB SCANNER INSTALLATION GUIDE TROUBLESHOOTING In addition to the troubleshooting information contained in this section, please see the Readme file on your installation CD. The Readme file contains additional information that may help you diagnose problems with the scanner. If you try all the troubleshooting procedures described in this section and in the Readme file, and the scanner still has problems, you may have a malfunctioning scanner.
TROUBLESHOOTING 57 Problem: I got the error message: PaperPort cannot allocate enough memory to perform internal critical operations. What do I do? Close any other active applications so that additional memory is available. If you click Continue, PaperPort moves the file to the PaperPort data directory and renames the file with the prefix “bad.” This allows you to recover the file later. To recover the file, you can import it into PaperPort by using the Import command in the File menu.
58 VISIONEER ONETOUCH 7300 USB SCANNER INSTALLATION GUIDE HOW TO UNINSTALL YOUR SCANNER To uninstall the scanner, remove the Visioneer OneTouch 7300 software first, and then remove the PaperPort software, or other scanner software. STEP 1: UNINSTALLING THE VISIONEER ONETOUCH SOFTWARE 1. On the Windows taskbar, click Start, point to Settings, and then click Control Panel. 2. Double-click the Add/Remove Programs icon. ■ Windows 98SE or ME: The Add/Remove Programs Properties window opens.
HOW TO UNINSTALL YOUR SCANNER 59 STEP 2: UNINSTALLING THE PAPERPORT SOFTWARE 1. On the Windows taskbar, click Start, point to Settings, and then click Control Panel. Windows XP: choose Control Panel from the Start menu. 2. Double-click the Add/Remove Programs icon. ■ Windows 98SE or ME: The Add/Remove Programs Properties window opens. Select the Install/Uninstall tab. ■ Windows 2000 or XP: The Add or Remove Programs window opens. Make sure the Change or Remove option is selected. 3.
60 VISIONEER ONETOUCH 7300 USB SCANNER INSTALLATION GUIDE VISIONEER 7300 USB SCANNER SPECIFICATIONS Bit Depth Scanning resolution Maximum Item sizes Scanner dimensions Height Width Length Weight USB Standard Operating temperature Relative humidity Safety and agency certifications Hardware warranty 48-Bit color (internal), 16-Bit gray (internal), 1-Bit line art/text Optical resolution: 1200 x 1200 dpi 8.5 x 11.69 inches (21.6 x 29.7 cm) 1.4 inches (33 mm) 10.1 inches (257 mm) 14.9 inches (378 mm) 3.
INDEX INDEX F A fidelity 42 folder for images 38 freestyle 45 aspect ratio 50 Auto Trim 46, 47 AutoCrop 31 AutoScan 20 resolution 53 B bit depth 52 blurred image 41, 42 brightness 31, 42 sampler 44 C channel menu 45 color bit depth 52 channel 45 histogram 43 hue 44 options 45 scanning 31 computer requirements 4 Configuration dialog box 27 configuration settings adjusting 34 contrast 31, 42 sampler 44 custom button 16 custom size image 50 D DeScreen 32 destination application 14, 28 documentation 4 d
P page settings 34 page size 31 paper size 53 PaperPort desktop 19, 21, 23 help topics 22 install 5 scan from 18 scan pane 19, 23 scanning with Widows 98, Me, 2000 18 scanning with Windows XP 23 preferences tab 36 preview image 22, 24 R resolution 31, 41, 48, 53 response curve 44 rotate image 50 S sampler buttons 44 saturation 44 scale 48 scan button 16 scan info box 51 Scan Manager Pro adjust settings 39–53 appearance panel 43 new profile 53 output size panel 47 preferences 52 response curve panel 45 sc
