User guide

VISIONEER MOBILITY WITH EYE-FI SCANNING GUIDE
9
1. Click the Networks tab, then the Private Networks tab.
Wireless networks that are already configured for the Eye-Fi card are displayed in the lower part of the
screen.
2. Click on the drop menu arrow and select a wireless network from the list. This list includes all
wireless networks within range of the Eye-Fi card.
To refresh the list select Refresh Network List.
3. Input the network password and fill in any other fields required to access the network.
4. Click the Add network to card button to use the wireless network.
Other Networks
If you want to connect to a network that you are not within range of at this time, select Other network in
the list and then configure the settings for that network.
1. Enter the name for the other network.
2. Select the security type for the other network from the drop down menu.
3. Enter that network’s password.
4. Select Network is out of range.
5. Click add Network to Card.
DIRECT MODE
Note: you will need to have the Eye-Fi Card connected to the computer to configure the network options
for the card. You can either insert the card into the scanner, connect it the computer and turn on the
power, or you can use a standard SDHC memory card reader.
Direct Mode is the Eye-Fi card’s ability to transfer images directly to a mobile device when the Eye-Fi card
is not in range of a configured wireless network. Please click on one of the links below to go to the section
of this user’s guide for instructions on configuring your mobile device to receive images from the Eye-Fi
card.
• Scan and Send Files to an iOS Mobile Device (iPad, iPod, and iPhone) on page 16