User guide

VISIONEER MOBILITY WITH EYE-FI SCANNING GUIDE
7
7. Click on Close Window on the final Eye-Fi card activation dialogue.
If you want to see a test scan using the Eye-Fi card, you need to disconnect the scanner from the
computer and then power cycle the scanner before you do a sample scan and transfer.
8. If you created an account, an email is sent to you. Click the link in the email to verify the account. A
welcome email is then sent to you. [moved from above]
9. Click Close on the Eye-Fi Center welcome screen.
That’s it! If you selected the option to send scanned images to your computer, and you configured a
wireless network for the Eye-Fi card, simply disconnect the scanner from the computer and power cycle
the scanner. When the scanner power is back on, insert a page into the front of the scanner. When
scanning is finished the image is saved to the Eye-Fi card and transmitted over your wireless network to
your computer. It will display in the Eye-Fi Center application when the transfer is complete.
Alternate activation option
1. At the Choose where to send photos & videos dialogue, select My mobile device (iOS/Android)
as the destination, and then click on Close Window.
2. Select your mobile device type at the Choose your mobile device dialogue and then click on Close
Window.
3. Click Continue on each successive dialogue that displays on-screen, and then click on Close
Window on the final screen.
The instructions in these dialogues describe the process for downloading and installing the mobile
application on your device. We recommend that you instead refer to the user guide section linked
below for detailed instructions specific to you mobile device type.
• Scan and Send Files to an iOS Mobile Device (iPad, iPod, and iPhone) on page 16
• Scan and Send Files to an Android Mobile Device on page 22