User guide

VISIONEER MOBILITY WITH EYE-FI SCANNING GUIDE

Make sure the Eye-Fi card is in a memory card reader or in the scanner with the power on before you

continue.

When the Eye-Fi Center opens the first time after installation, a login window is displayed. If you already

have an Eye-Fi account please login now. Your new Eye-Fi card will be activated to your existing account.

If this is your first time using Eye-Fi, you need to create an account. A valid Email address is required for

registering, activating, and using the Eye-Fi card.

As you go through the card activation steps described below, you will also be configuring the Eye-Fi card’s

network settings and image transfer options. We recommend that you leave the default options selected

during setup. You can change these options later.

Note: If the scanner times out during the registration process, turn it on again by pressing the power

button until a light flashes.

1. Launch the Eye-Fi Center application as follows:

Windows users—open Start > Eye-Fi > Eye-Fi Center.

Mac users—open the Applications folder, access the Eye-Fi folder, then Eye-Fi Center.

2. Input your email address and password in the appropriate fields. If you are logging into an existing

account click the login button. If you are creating an account, re-type the password and click the

option to create the account.

3. If prompted to update the firmware on the card, do so by clicking the Update button.

During the firmware update it is important that the Eye-Fi card is not removed from the computer. If

you are using an memory card reader, make sure you leave the card in the computer until the Eye-Fi

application displays a window that the firmware update is complete. If the Eye-Fi card is in the

scanner, the scanner lights will continuously flash while the update is in process. The lights will stop

flashing when the firmware update is complete.

When the firmware update is complete, you can proceed with activating the card and configuring the

card settings.