User guide

VISIONEER MOBILITY WITH EYE-FI SCANNING GUIDE

INSTALL THE EYE-FI CENTER APPLICATION

Before you begin installing the software, make sure you have an active Internet connection. The Eye-Fi

software will look for updated software during installation and you will be prompted to install any

available updates.

You can use either a standard memory card reader or install the software with the Eye-Fi card in the

scanner, connected and powered on.

Note: Do not delete any files or folders that are already on the Eye-Fi card when you first use it. A folder

named DCIM is created when images are saved to the card. This is the only folder that you should modify

or delete from the card.

Tip: the scanner automatically powers off after 2 minutes to conserve battery power. If you decide to

install the software using the scanner as the memory card reader, tap the function button occasionally to

keep the scanner powered on while installing the software.

1. With the scanner off and Eye-Fi card in the scanner, connect the cable to the scanner.

2. Press and hold the power button on the scanner until you see a light flash on the scanner. The

computer detects the scanner as a disc drive.

3. Windows users—AutoRun will display a list of options for you to choose how to view the folder.

Select the option to “Open folder to view files”.

Mac users—an Eye-Fi icon appears on the desktop.

Note: if Eye-Fi does not appear on the desktop (Mac users) or if AutoRun does not prompt you (Windows

users), open a computer window to locate the disc drive. You can also try plugging the scanner into a

different USB port if the scanner is not being detected properly.

4. Click or double-click the EYE-FI drive to open it.

5. Open the START HERE folder.

6. Open the Mac OS X or Windows folder.

7. Windows—double-click on Setup to launch the Eye-Fi installer.

Mac—double-click on Eye-Fi and then double-click on Eye-Fi Installer to launch the Eye-Fi

installer.

If there is an active Internet connection to your computer, the Eye-Fi installer will automatically

check to see if there is a newer version of the software. If a newer version is found it will be

downloaded to your computer and then the installer will launch when the download is complete.