User guide

SCAN AND TRANSFER IMAGES WIRELESSLY WITH EYE-FI

SCAN AND SEND FILES TO AN ANDROID MOBILE DEVICE

DOWNLOAD AND INSTALL THE EYE-FI MOBILE APPLICATION

1. On your Android device, access the Google Market application.

2. Search for the Eye-Fi application. You want the free one by Eye-Fi, Inc.

3. Download the application to install it.

4. Upon installation, touch the Open button to launch the application.

5. Input your Eye-Fi account email address and password, and then tap Login.

If the Eye-Fi card is in the scanner, make sure the scanner is powered on.

6. Select your Eye-Fi card in the Pairing screen and then tap Continue.

7. A confirmation dialogue will display on your device. Make sure the options for Photos (JPG files)

and RAW photos (PDF files) is selected, and then tap the option to Switch to [your mobile device

model].

8. Tap Continue on the Eye-Fi Card Pairing screen.

9. Tap Continue on the FAQ screen.

10. Touch Ok on the What’s New screen if one is displayed.

You will now be in the Eye-Fi mobile application. When you are within range of your configured wireless

network, scanned images will be sent directly to your mobile device from the Eye-Fi card in your Visioneer

Mobility Air scanner.

Note that if you had previously selected Photos and RAW files to be sent to your computer during the

initial setup, pairing your mobile device with the Eye-Fi card automatically changes Photos and RAW files

to be transferred to your mobile device.

If you want to be able to scan and send files to your mobile device when you are not in range of a wireless

network, you will need to connect to the Eye-Fi card’s Direct Mode network. Please follow the

instructions in the next section for configuring your mobile device to connect to the Eye-Fi card’s Direct

Mode Network.

CONNECTING TO THE EYE-FI DIRECT MODE NETWORK

The Eye-Fi card has the ability to create a network access point, for your to connect your mobile device, to

receive images when you are not in range of your wireless network. When a Wi-Fi network is unavailable

to transfer images, images can be transferred wirelessly from the Eye-Fi card to a mobile device. This is

referred to as Direct Mode.

After you connect to the Eye-Fi Direct Mode network as described below, you will not need to follow

these instructions again unless you intentionally remove the Eye-Fi network from you mobile device.