User guide

SCAN AND TRANSFER IMAGES WIRELESSLY WITH EYE-FI
20
Deleting Documents
1. In the Documents list, tap the Edit button.
A selection circle will be displayed next to each time in the documents list.
2. Tap on each file name that you want to send.
3. Tap the trash can icon.
4. Tap the option to confirm that you want to delete the files you selected.
SCANNING TO DOCAIR
After you have successfully configured your mobile device, you can then scan any time following these
simple steps:
1. Open DocAir on your mobile device.
2. Turn on the scanner power.
3. All of the LEDs will flash as the scanner initializes. When the scanner is ready to scan, a single LED
will be lit next to the first function represented by a camera icon.
4. Tap the function button on the scanner to cycle through the scan options until the LED is lit next to
the option you want to use to scan.
5. Insert an item face up in the paper feed slot, aligned to the left side of the scanner.
6. The scanner detects the page and starts to feed it through the scanner.
Note that there will be a short pause after you insert the page before the scanner starts to feed the
page. This pause allows you to straighten the item in the paper feed slot.
7. The scanner starts scanning, when finished it is saved to the Eye-Fi card and the card starts
transmitting the file. In the DocAir application on your mobile device, you will see images loading
into the software.
Scans in color at 300dpi and creates a JPG (*.jpg) file.
Scans in black & white at 300dpi and creates an Adobe PDF (*.pdf) file.
Scans in color at 300dpi and creates an Adobe PDF (*.pdf) file.