User guide

VISIONEER MOBILITY WITH EYE-FI SCANNING GUIDE
17
Tip: the scanner automatically powers off after 2 minutes to conserve battery power. Tap the function
button occasionally to keep the scanner powered on while initiating the connection between your mobile
device and the scanner. Alternatively, if you have a memory card reader, you can insert the Eye-Fi card into
the card reader for configuring the connection between your mobile device and the Eye-Fi card’s Direct
Mode network.
1. On your computer—open the Eye-Fi Center application.
2. With the Eye-Fi card in the scanner, connect the scanner to the computer and turn on the power.
3. When the Eye-Fi card shows as connected in the Eye-Fi Center application, click on the gear icon to
open the settings for your Eye-Fi card.
4. Click the Networks tab, then the Direct Mode tab.
5. Make sure the option to use Direct Mode when no known Wi-Fi networks are in range is selected.
6. Move the sliders left or right to change the wait times for the Eye-Fi card. When the Eye-Fi card is
broadcasting a network it is using the scanner battery to power the network. The recommended
settings are:
Select 2 minutes for Direct Mode to wait for a device to connect to it.
Select 30 seconds for the Direct Mode to stay on after the last item is received.
7. Click the Save button.
Do not close this window yet. You will need to have this window open to start the direct mode
network.
8. On your mobile device—tap DocAir to open the application.
These instructions assume that you have already logged into your Eye-Fi account, and paired to the
Eye-Fi card, as indicated in the instructions for Download and Install Visioneer DocAir on page 16.
9. Tap Gear icon to show the settings for DocAir.
If you are looking at a document tap Documents to show the documents list and then tap Edit.