User guide

SCAN AND TRANSFER IMAGES WIRELESSLY WITH EYE-FI

SCAN AND SEND FILES TO AN IOS MOBILE DEVICE (IPAD, IPOD, AND IPHONE)

Important: make sure Wi-Fi access is enabled on your mobile device.

DOWNLOAD AND INSTALL VISIONEER DOCAIR

1. Open the App Store from your mobile device.

2. Open the search field and then input: Visioneer DocAir

3. Tap Search.

4. Select the Visioneer DocAir and follow the on-screen steps to download the mobile application to

your device.

5. Tap DocAir to open the application.

6. Tap Next on the Welcome screen.

7. Input your Eye-Fi account email address and password, and then tap Login.

If the Eye-Fi card is in the scanner, make sure the scanner is powered on.

8. Tap Add... under Eye-Fi Cards.

9. Select your Eye-Fi card under Select Device to Pair.

10. Tap Pair with this Card to pair your mobile device with the Eye-Fi card.

11. Tap Done on the settings Window.

You will now be in the DocAir mobile application. When you are within range of your configured wireless

network, scanned images will be sent directly to your mobile device from the Eye-Fi card in your Visioneer

Mobility Air scanner. Please refer to Using DocAir on page 19 for instructions on scanning and sending

images to your mobile device.

If you want to be able to scan and send files to your mobile device when you are not in range of a wireless

network, you will need to connect to the Eye-Fi card’s Direct Mode network. Please follow the

instructions in the next section for configuring your mobile device to connect to the Eye-Fi card’s Direct

Mode Network.

CONNECTING TO THE EYE-FI DIRECT MODE NETWORK

The Eye-Fi card has the ability to create a network access point, for your to connect your mobile device, to

receive images when you are not in range of your wireless network. When a Wi-Fi network is unavailable

to transfer images, images can be transferred wirelessly from the Eye-Fi card to a mobile device. This is

referred to as Direct Mode.

After you connect to the Eye-Fi Direct Mode network as described below, you will not need to follow

these instructions again unless you intentionally remove the Eye-Fi network from you mobile device.

While going through these instructions you will be configuring the Eye-Fi Card settings using the Eye-Fi

Center application on your computer, and configuring the mobile application on your mobile device.