User guide

VISIONEER MOBILITY WITH EYE-FI SCANNING GUIDE
13
SCAN AND SEND FILES TO A COMPUTER
When images are transferred, they are copied to the computer/device. The original images remain on the
Eye-Fi card until deleted from the card. So even if the images do not transfer as expected, they can be
accessed from the card later. Before scanning, make sure you have configured your Eye-Fi card for wireless
image transfer as described in the previous section.
1. Turn on the scanner power.
2. All of the LEDs will flash as the scanner initializes. When the scanner is ready to scan, a single LED
will be lit next to the first function represented by a camera icon.
3. Tap the function button on the scanner to cycle through the scan options until the LED is lit next to
the option you want to use to scan.
4. Insert an item face up in the paper feed slot, aligned to the left side of the scanner.
5. The scanner detects the page and starts to feed it through the scanner.
Note that there will be a short pause after you insert the page before the scanner starts to feed the
page. This pause allows you to straighten the item in the paper feed slot.
SCAN TO A WINDOWS COMPUTER
On a Windows computer, when the Eye-Fi software is running in the background and scanning is
performed within the wireless network, a visual indicator appears for each image being transferred
automatically. The following figure shows that the Eye-Fi software is running in the background (second
icon).
1. To view the images, open the Eye-Fi Center application, either by clicking the icon on the taskbar or
launching from the menu, for example Start > Eye-Fi > Eye-Fi Center.
Scans in color at 300dpi and creates a JPG (*.jpg) file.
Scans in black & white at 300dpi and creates an Adobe PDF (*.pdf) file.
Scans in color at 300dpi and creates an Adobe PDF (*.pdf) file.