User guide

SCAN AND TRANSFER IMAGES WIRELESSLY WITH EYE-FI
10
Scan and Send Files to an Android Mobile Device on page 22
TRANSFERRING PHOTO FILES (JPG FILES)
Note: you do not need to have the Eye-Fi card connected to the computer to change these settings. The
Eye-Fi Helper utility will route the files to the appropriate locations based on the settings you choose in
this window.
Click on the Photos tab to select where you want JPG files transferred. The JPG scan function is
indicated on the scanner with a camera icon.
Computer—select Upload photos to this computer option to have images transferred to your
computer when the scanner is in range of a wireless network you configured for the Eye-Fi card. Your
computer must be on to receive the scanned images. Select the other options in this dialogue as
needed for where you want files saved on your computer. If your computer is not always on, we
recommend that you also enable the Tr a nsfer Mo d e type Relayed Transfer if you want images to be
saved on the Eye-Fi servers, and then routed to your computer the next time you turn it on.
If you have configured a mobile device to receive scanned images, the device that the files will be sent
to is displayed in this dialogue.
Click on the Save button when you are done making changes in this dialogue.
Online—select Eye-Fi Card allows you to share photos online and then choose the file sharing site
that you want to use for uploading and sharing files. Follow the dialogue prompts on-screen to
configure these options.
If your site is not shown in the list click on More Sites, and then select the option to display all sites
from the menu.
If you enable this option the Tr a n s f e r Mo d e type Relayed Transfer is automatically enabled.
Note that even if you configure an online sharing site, images are still transferred to your computer
unless you deselect the option to upload photos to your computer on the Computer tab.
Click on the Save button when you are done making changes in this dialogue.
TRANSFERRING RAW FILES (PDF FILES)
Note: you do not need to have the Eye-Fi card connected to the computer to change these settings. The
Eye-Fi Helper utility will route the files to the appropriate locations based on the settings you choose in
this window.