User manual

16
After installing the camera software, the camera is not detected by the
software
Some PC’s have been shipped without the USB Port mode enabled. To
enable the USB port, you must run the system CMOS setup program. This
setup program is only available when you power up the computer. The
procedure is different for each system so you will need to refer to your PC
manual for more details.
Blurred video/still image
A. Adjust the manual focus on the camera hardware.
B. Adjust the sharpness settings with the software
Camera software stops working after installing other application
programs
Installing other application will modify the system register so that the camera
no longer works. If this occurs, please reinstall the camera software from the
product CD-ROM.
If you have any questions regarding the bundled application software, you
may contact the respective software companies directly (please refer to
software manuals for contact information).
Camera maintenance
• Keep the camera away from moisture and extreme temperature
• Clean the outside of the camera with a clean, dry cloth
• Never use harsh or abrasive cleaners or organic solvents on the camera or
on any of its parts.
• Never disassemble or touch the inside of the camera. This could result in
electrical shock and void your warranty coverage.
To remove dust and dirt, blow gently on the lens. Moisten the lens by
breathing lightly on it. Wipe the lens gently with a soft lint-free cloth or an
untreated lens-cleaning tissue. Do not use a cleaning solution unless it is
designed specifically for camera lenses. Do not wipe the camera lens with
chemically treated eyeglass lens tissues as it may scratch the lens.