User manual

USER’S MANUAL 11
You must select the Exposure Type as Band 60Hz or Band 50 Hz according
to the power source of your PC. In different areas there will need different
settings. The general setting for each area are as below:
- 50 HZ CHINA, HONG-KUNG, JAPAN, EUROPE.
- 60 Hz Taiwan, Korea, USA.
There are a number of items can be choose from depending on your particular
need. For Brightness & contrast, also known as tone correction commands,
these settings allow the image to be adjusted according to the lighting
environment. The contrast makes the difference between dark and light areas
more or less obvious.
In iCAM320, we had implemented an intelligent detector. After you complete
the installation, it can then adjust the light source automatically according to
the environment.