Visioneer ® OneTouch 9520 Photo Scanner User's Guide for Windows
Visioneer OneTouch 9520 Photo Scanner User’s Guide FOR WINDOWS
COPYRIGHT INFORMATION Copyright © 2007 Visioneer, Inc. Reproduction, adaptation, or translation without prior written permission is prohibited, except as allowed under the copyright laws. The Visioneer brand name and logo are registered trademarks of Visioneer, Inc. The PaperPort brand name and logo are registered trademarks of Nuance Communications, Inc. Corel® and Paint Shop Pro® are registered trademarks of Corel, Corp. ArcSoft Scrapbook Suite® is a registered brand name of ArcSoft, Inc.
TABLE OF CONTENTS i TA B L E O F C O N T E N T S Welcome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 What’s in the Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 The Visioneer OneTouch 9520 Photo Scanner . . . . . . . . . . . . . . . . . 2 What You Need . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ii TABLE OF CONTENTS Adjusting the Brightness and Contrast . . . . . . . . . . . . . . . . . . . . 57 Adjusting Gamma, Saturation, and Color Hue . . . . . . . . . . . . . 58 Adjusting Input Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59 Creating a New Advanced Interface Profile . . . . . . . . . . . . . . . . 62 Scanning 35mm Slides and Negatives . . . . . . . . . . . . . . . . . . . . . . . 63 A Brief Explanation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
TABLE OF CONTENTS iii Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137 Cleaning the Scanner Glass . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137 How to Uninstall Your Scanner . . . . . . . . . . . . . . . . . . . . . . . . . . . 140 Uninstalling the OneTouch 4.0 Scanner Software . . . . . . . . . . 140 Uninstalling the PaperPort Software . . . .
iv TABLE OF CONTENTS
WELCOME Congratulations on purchasing your Visioneer OneTouch 9520 Photo scanner. With this scanner you can quickly scan paper documents, color photos, 35mm slides and negatives and place their electronic images on your computer. WHAT’S IN THE BOX Before starting the installation, check the contents of the box to make sure that all parts are included. If any items are missing or damaged, contact the dealer where you purchased the scanner.
2 VISIONEER ONETOUCH 9520 PHOTO SCANNER USER’S GUIDE THE VISIONEER ONETOUCH 9520 PHOTO SCANNER Scanner lid Transparency light source Glass Reference marks Locking tab (underneath) OneTouch buttons panel Status light OneTouch buttons Email Archive Copy Scan Photo USB port Option port TPA cable Power jack
THE VISIONEER ONETOUCH 9520 PHOTO SCANNER 3 Scanner lid—Protects the document from light and contamination. Transparency light source—The light source for scanning 35mm slides and negatives. Shines light down through 35mm slide or negative transparencies, then through the glass onto the scanning sensors in the body of the scanner. Glass—Items are placed face down aligned at the arrow symbol at the upper left corner. Reference marks—Marks on the border of the glass show where to align various paper sizes.
4 VISIONEER ONETOUCH 9520 PHOTO SCANNER USER’S GUIDE WHAT YOU NEED IBM-compatible Pentium 4 PC, or AMD equivalent with: ■ A CD-ROM drive ■ An available Universal Serial Bus (USB) port ■ ■ ■ Microsoft® Windows® operating system: 2000 (Service Pack 4), XP (Service Pack 1 and 2), or Vista Windows 2000 and XP: A minimum of 512 megabytes (MB) of internal memory (RAM) Windows Vista: A minimum of 1 gigabyte (GB) of internal memory (RAM) 350 MB minimum of free hard disk space A VGA or SVGA Monitor The recommen
BEFORE YOU BEGIN 5 Installing Installation is a quick, three-step process: 1. Assemble the scanner 2. Install the software 3. Connect the scanner BEFORE YOU BEGIN Please make sure of the following before you begin installation: ■ If your computer has AntiVirus or AntiSpyware software running, you may see messages during installation asking you to allow the installation to proceed.
6 VISIONEER ONETOUCH 9520 PHOTO SCANNER USER’S GUIDE STEP 1: ASSEMBLE THE SCANNER To assemble the scanner: 1. Remove any shipping tape from the top and bottom of the scanner. 2. Plug the Transparency Adapter Cable into the Option port on the body of the scanner. The Transparency Adapter Cable must be securely attached for your scanner to be able to scan 35mm slide and negative transparencies. Transparency Adapter Cable 3. Open the lid and remove the protective film from the Transparency Adapter.
STEP 1: ASSEMBLE THE SCANNER 4. Turn the scanner over and slide the lock tab to the unlocked position. The scanner must be unlocked for you to continue with the installation. It must also be unlocked to scan. Note: The locking tab protects the scanner’s scan head by holding it securely in position. Lock the scanner when transporting it from one location to another, but remember to unlock it before scanning. The scanner will not scan when locked. 5. Proceed to “Step 2: Install the Software.
8 VISIONEER ONETOUCH 9520 PHOTO SCANNER USER’S GUIDE STEP 2: INSTALL THE SOFTWARE Note: The software is on the two CD’s you received with your scanner. Please be sure to install from Disc 1 first. To install the software: 1. Start Microsoft Windows and make sure no other applications are running. 2. Insert Disc 1 into your computer’s CD-ROM drive. The Main Menu automatically opens. Note: If the CD does not start, check the following: ■ Make sure you have inserted Disc 1.
STEP 2: INSTALL THE SOFTWARE 3. On the Main Menu, select Install Products. 4. Make sure the boxes for Nuance PaperPort®, Scanner Driver, and Corel® Paint Shop Pro® are checked. If you also want to install the ArcSoft Suite software, select it too. 5. Click Install Now.
10 VISIONEER ONETOUCH 9520 PHOTO SCANNER USER’S GUIDE The PaperPort installation options opens: 1. The Select Language window opens. Click the drop-down menu arrow and select the language you want to use. Click OK. The first PaperPort Installation window opens. 2. On the PaperPort Welcome window, click Next. Installing PaperPort will uninstall any existing version of PaperPort and will install the newer version while retaining all of your previous PaperPort files. 3.
STEP 2: INSTALL THE SOFTWARE 11 The Welcome to the OneTouch 4.0 Setup Wizard opens. 1. Click Next. 2. On the Visioneer License Agreement window, read the license agreement. If you accept the terms, select I Agree. If you choose not to accept the license agreement, the installation will terminate and the scanner driver will not be installed. 3. Click Next.
12 VISIONEER ONETOUCH 9520 PHOTO SCANNER USER’S GUIDE A window opens with image quality samples asking you to select an image for your Color Space setting. The Color Space setting sets the gamma value for the scanner so scanned items look good on your monitor. Gamma controls the brightness of the midtones of colors. That setting can be changed later on as you’re scanning. 4. Select the option that looks best to you and click Next. The driver installation will now begin.
STEP 2: INSTALL THE SOFTWARE 13 5. STOP when you see the “Complete the installation by connecting your hardware” window. Do NOT click on OK yet. Leave the window open and proceed to “Step 3: Connect the Scanner” on page 14. Note: If you want to see more information about your scanner and a quick explanation of how to use the OneTouch features, click the More button on the window. When you’re finished, return to the window to continue the installation process.
14 VISIONEER ONETOUCH 9520 PHOTO SCANNER USER’S GUIDE STEP 3: CONNECT THE SCANNER Make sure the locking tab is unlocked, then connect the scanner. To connect your scanner: 1. Remove any tape from the USB cable. 2. Using the steps on the screen as your guide, plug the flat, computer end of the USB cable into an available USB port on the computer. 3. Plug the other end of the USB cable into the scanner’s USB port. USB If the plug does not attach easily, make sure that you are plugging it in correctly.
STEP 3: CONNECT THE SCANNER 15 4. Plug the power adaptor into the scanner power port, then into a wall outlet. Note: Your scanner does not have a power switch. Plugging it in turns on the power. Note: Only use the power adaptor (Model No. PA-08J made by YHI, Ltd.) included with your scanner. Connecting any other type of power supply may damage your scanner, and will void its warranty. The status light on the front of the scanner is illuminated, indicating the scanner is receiving power.
16 VISIONEER ONETOUCH 9520 PHOTO SCANNER USER’S GUIDE If you are using Windows XP and have plugged the USB cable into a USB 1.1 port, an information bubble may open explaining that “A HI-SPEED USB device is plugged into a non-HI-SPEED USB hub”. Plug the USB cable into a USB 2.0 port (if available) or just disregard the message. If you leave it plugged into the USB 1.1 port, your scanner may scan a bit slower than with a USB 2.0 port.
STEP 3: CONNECT THE SCANNER 17 5. When the software is finished loading, return to the Connect Scanner window and click OK to finish the installation process. Note: If you want to see more information about your scanner and a quick explanation of how to use the OneTouch features, click the More button on the window. When you’re finished, return to the window and click OK to complete the installation process.
18 VISIONEER ONETOUCH 9520 PHOTO SCANNER USER’S GUIDE 6. Click Close on the Installation Complete window. 7. If you selected Corel Paint Shop Pro to install, its installation will now begin. Follow the instructions on the screen. 8. If you also selected ArcSoft Suite to install, a window opens with instructions.
STEP 3: CONNECT THE SCANNER 19 Note: ArcSoft Suite contains several scanning and image enhancement software applications with features that include intuitive steps to scan, photo editing, hands-on instructions to build collages from your digital images, and easy-to-use project templates. Note: If you did not select ArcSoft Suite to install, you can still follow the next steps to install it now. If you don’t want to install it, skip to step 11 below to view the user guides for your scanner and software.
20 VISIONEER ONETOUCH 9520 PHOTO SCANNER USER’S GUIDE 12. On the Main Menu, click User Guides. The Visioneer User Guides window opens. Use this window to view and save the User Guides you want. The User Guides are in Adobe® Acrobat® PDF format. The CD also includes a free copy of Acrobat® Reader® in case your computer does not have it already installed. The Scanner Readme file is in HTML format and will open in any standard browser. If you need to, click Acrobat Reader to install it now.
STEP 3: CONNECT THE SCANNER 21 To view and save the User Guides: 1. Click the name of a User Guide you want to view and it will open in Acrobat Reader. Use the Acrobat Reader Save command to save that User Guide on your computer. 2. Return to the Visioneer User Guides window and repeat the process to open, view, and save all the other User Guides you want. The Scanner Readme file has late-breaking news about your scanner. 3.
22 VISIONEER ONETOUCH 9520 PHOTO SCANNER USER’S GUIDE REGISTER YOUR SCANNER AND CHECK FOR UPDATES Registering your scanner is important as it provides you with access to our free telephone support service. Registration also gives you free access to software updates for your scanner. To register your scanner: 1. Right-click on the OneTouch icon in the Windows Notification Area (at the bottom right corner of the screen). 2. Choose Check for Online Updates from the pop-up menu. The OneTouch Icon 3.
REGISTER YOUR SCANNER AND CHECK FOR UPDATES 23 Scanning This section describes how to scan paper documents as well as 35mm slides and negatives. You can use several different methods to scan with your scanner: ■ OneTouch Scanner Buttons—Each scanner button is set up to scan for a particular function, such as Email to attach a scanned item to a new Email message, or Photo to scan photographs to the Corel Paint Shop Pro software where you can touch up the colors.
24 VISIONEER ONETOUCH 9520 PHOTO SCANNER USER’S GUIDE SCAN WITH THE SCANNER BUTTONS Pressing a scanner button scans the item, then sends the image to the Destination Application associated with the button. To scan by pressing a OneTouch button on the scanner: 1. Place an item face down on the glass. Align the edge of the item with the arrow at the upper-left corner of the glass. Close the scanner lid and press one of the OneTouch buttons.
SCAN WITH THE SCANNER BUTTONS 25 ABOUT THE ONETOUCH BUTTONS OneTouch is your main scanning interface for using the scanner. The OneTouch Buttons on the scanner mirror the software OneTouch Button Panel. Changing the button settings on the OneTouch Button Panel makes the same changes to the buttons on the scanner. Pressing a scanner button scans the item, and then sends the image to the Destination Application associated with the button.
26 VISIONEER ONETOUCH 9520 PHOTO SCANNER USER’S GUIDE Button Function Attaches the scanned item to a new email message Preconfigured Settings Scans the item as a color document in the PDF format. Opens your email application with the scanned image attached to a new message ready to address and send. Copy/Print the scanned item Scans the item as a color document in the BMP format. Sends the image to your printer/copier at the printer/ copier’s default resolution, and begins printing.
SCAN WITH THE SCANNER BUTTONS 27 CHECK A SCANNER BUTTON’S SETTINGS BEFORE YOU SCAN 1. To check the settings before scanning, press, hold down, then release the scanner button you want to check. Press, hold down, then release a scanner button. The OneTouch Properties window opens for you to change the settings before scanning. The button you pressed on the scanner is already selected on the top of the window for you. The tabs correspond to the scanner buttons.
28 VISIONEER ONETOUCH 9520 PHOTO SCANNER USER’S GUIDE If you make changes in the OneTouch Properties window, then click its Apply button, the information in the OneTouch Button Panel will update to show the new settings. Note: If you closed the OneTouch Properties window and want to re-open it, you can press and hold down the scanner button again, or right-click the icon on the Button Panel. 2. When you are ready to scan, simply press the scanner button. Do not hold down the scanner button.
SCAN FROM THE ONETOUCH BUTTON PANEL 29 SCAN FROM THE ONETOUCH BUTTON PANEL Scanning from the button panel on your computer’s screen works just like pressing a button on the scanner. The scanner scans the item, then sends the image to the Destination Application indicated by the button’s icon. This method of scanning is especially helpful if the scanner is not located close to your computer. To scan from the button panel on the screen: 1. Place an item face down on the glass.
30 VISIONEER ONETOUCH 9520 PHOTO SCANNER USER’S GUIDE THE ONETOUCH BUTTON PANEL’S FEATURES The OneTouch Button Panel is your on-screen set of controls for the scanner. In addition, the panel shows information about the scanner and its settings. Click the green arrows at the top of the panel to cycle back and forth through three views of the panel. 1. Click the arrow pointing to the left to see the scanners currently attached to your computer.
SCAN FROM THE ONETOUCH BUTTON PANEL 31 ABOUT THE ONETOUCH BUTTON PANEL’S NAMES AND ICONS The button names on the panel are the same as button names on the scanner. The icons indicate the Destination Applications so you can see, at a glance, where the image will be sent when scanning is finished. The Email button—Scans a page in color then sends it to your email application. The email application opens and the image is automatically attached to a new message ready for you to address and send.
32 VISIONEER ONETOUCH 9520 PHOTO SCANNER USER’S GUIDE SCANNING FROM THE TWAIN INTERFACE Your 9520 OneTouch scanner is specially designed to be a Photo scanner as well as have the ability to scan 35mm slides and negatives. This means you can make exact copies of your photos and documents, as well as scan 35mm slides and both positive and negative filmstrips. A NOTE ABOUT THE TWAIN STANDARD Your scanner uses the TWAIN interface to scan Photographs, Documents, 35mm Slides and Negatives.
SCANNING FROM THE TWAIN INTERFACE 33 ACCESSING THE TWAIN INTERFACE FROM PAPERPORT As previously stated, you can access the TWAIN interface from any TWAIN compliant scanning application. You can configure any of your OneTouch buttons to automatically open the TWAIN interface when you press a button on the scanner. Below are instructions for accessing the TWAIN interface from OneTouch and from PaperPort. Opening the TWAIN Interface from OneTouch 1.
34 VISIONEER ONETOUCH 9520 PHOTO SCANNER USER’S GUIDE 6. Click OK to save your changes and close the OneTouch Properties window. 7. Press the Scan button on the scanner or click on the Scan button on the OneTouch Panel. 8. The TWAIN interface will now open. This is the Basic TWAIN Interface Click either Advanced Interface or Basic Interface to toggle between the two TWAIN interface options.
SCANNING FROM THE TWAIN INTERFACE 35 To access the TWAIN interface from PaperPort: 1. On the Windows taskbar, click Start, point to Programs, point to ScanSoft PaperPort, then click PaperPort. The PaperPort Desktop opens. Scan icon. Folders pane. 2. Click the Scan icon on the PaperPort command bar.
36 VISIONEER ONETOUCH 9520 PHOTO SCANNER USER’S GUIDE The Folders pane (which shows folders for organizing your scanned images) is replaced by the Scan pane. Scan pane. Click the arrow to see the list of scanners. If this Scan button is not active, see the section on page 38 to set up your scanner to work with PaperPort. 3. Click the Scanner drop-down arrow, and select TWAIN: Visioneer 9520 from the drop-down list.
SCANNING FROM THE TWAIN INTERFACE 37 4. In the “Scan what?” section, choose to scan a Document or Photograph. If you want to change the format of the scanned item’s file name or file type before you start scanning, click Settings. The default file type for documents is .pdf and the default for photographs is .jpg. See the ScanSoft PaperPort User’s Guide for more information about the PaperPort Settings. 5.
38 VISIONEER ONETOUCH 9520 PHOTO SCANNER USER’S GUIDE SETTING UP YOUR SCANNER TO WORK WITH PAPERPORT When you select a scanning option on the PaperPort window from the Scanner drop-down list, either TWAIN: Visioneer 9520 or WIA: Visioneer 9520 (Windows XP only), the Scan button at the bottom of the panel should become active. If it doesn’t, you need to set up PaperPort to work with your scanner. If this Scan button is not active, you need to set up PaperPort to work with your scanner.
SCANNING FROM THE TWAIN INTERFACE 39 To setup your scanner: 1. From the Scanner drop-down list, select one of the options, such as Twain: Visioneer 9520. 2. Click the Setup button. A window opens to begin the setup process. 3. Click Yes then click Next. The next window offers you the option to run hardware diagnostics.
40 VISIONEER ONETOUCH 9520 PHOTO SCANNER USER’S GUIDE 4. Click Yes (recommended) then click Next. The next window is for checking the connection between your scanner and the computer. 5. Click Next. After the Setup Wizard checks the connections, the next window is displayed. It has a series of setup options, but only the Basic scan test is necessary because your scanner was already tested and calibrated when you installed the OneTouch 4.0 software.
SCANNING FROM THE TWAIN INTERFACE 41 6. Click Next. The next window tells you to insert a page or photo into the scanner. 7. Place an item face down on the glass. Align the edge of the item with the arrow at the upper-left corner of the glass and close the lid.
42 VISIONEER ONETOUCH 9520 PHOTO SCANNER USER’S GUIDE 8. Click Next. The TWAIN Interface opens. Note: If you are setting up the scanner for WIA, the WIA interface opens instead. 9. Click the Scan button on the TWAIN interface. The Setup Wizard runs the scan test. A message window opens that says “Basic scan test passed.
SCANNING FROM THE TWAIN INTERFACE 43 10. Click Next on the message window. The final Setup window opens to let you know the setup process is finished. 11. Click Finish. Your scanner is now setup for the scanning option you selected (in the example above, it’s the TWAIN option) and the Scan button on the PaperPort window will now become active.
44 VISIONEER ONETOUCH 9520 PHOTO SCANNER USER’S GUIDE SETTING UP YOUR SCANNER TO WORK WITH COREL PAINT SHOP PRO If you want to scan photographs, 35mm slides, or 35mm negatives from within Corel Paint Shop Pro, you need to first set up the Corel Paint Shop Pro software to access the scanner. This is a one time setup and does not need to be repeated each time you scan. To set up Corel Paint Shop Pro for your Visioneer 9520 Photo scanner: 1.
THE TWO TWAIN INTERFACE OPTIONS 45 THE TWO TWAIN INTERFACE OPTIONS When scanning from PaperPort, Corel Paint Shop Pro or other TWAIN application, you have two TWAIN interface options: ■ Basic Interface—Use the Basic Interface if you don’t need to make many adjustments before scanning. The Basic Interface is only for scanning paper items on the Flatbed.
46 VISIONEER ONETOUCH 9520 PHOTO SCANNER USER’S GUIDE SCANNING FROM THE BASIC INTERFACE The Basic Interface can scan a preview of the image so you can adjust its appearance before scanning the final image. After adjusting the appearance, you click the Scan button on the Basic Interface (not on the scanner) to scan the item. Click the Advanced Interface button if you would rather scan with the Advanced Interface. You must use the Advanced Interface to scan 35mm slides or negatives. 1.
SCANNING FROM THE BASIC INTERFACE 47 5. To choose another resolution, use the Resolution (DPI) menu. You can also change the picture type again, for example, from color to grayscale, and you can change the paper size from the Paper Size menu. To scan only a portion of the image see the section “Scanning Part of an Image” on page 49. 6. To preview the item with the new settings, click the Preview button again on the Basic Interface. 7. When you are satisfied with the preview image, click Scan.
48 VISIONEER ONETOUCH 9520 PHOTO SCANNER USER’S GUIDE 9. If you’re using PaperPort, the PaperPort Scan message box opens. Click Done. When scanning is complete, thumbnail images appear on the PaperPort Desktop. Single page items appear as individual thumbnails on the PaperPort desktop. Depending on the file type you selected for the images, multiple pages appear as PaperPort stacks. For example, images with the .pdf file type can be stacked, but images with the .
SCANNING FROM THE BASIC INTERFACE 49 SCANNING PART OF AN IMAGE To scan part of an image, you draw a box around the part you want. The scanner then only scans that portion of the image and places it in the scanning application (in this case the PaperPort Desktop). 1. Put the pointer on the image and drag a box around the section of the image that you want to scan. A dotted outline shows the selected area in the image. This is the image that appears on the PaperPort desktop when scanning is finished.
50 VISIONEER ONETOUCH 9520 PHOTO SCANNER USER’S GUIDE SCANNING FROM THE ADVANCED INTERFACE The Advanced Interface has more options for scanning than the Basic Interface. It is also for scanning 35mm slides and negatives. 1. Start PaperPort or other TWAIN application and open the TWAIN interface. 2. If the Basic Interface opens, click the Advanced Interface button. The Advanced Interface opens. Choose a scanning option. Scan Reflective Using is for scanning paper items.
SCANNING FROM THE ADVANCED INTERFACE 51 3. From the menu at the top left panel, select the type of scanning: ■ Scan Reflective Using to scan paper items. ■ Scan Slide Using to scan 35mm slides. ■ Scan Negative Using to scan 35mm negative filmstrips. See “Scanning 35mm Slides and Negatives” on page 63 for information about scanning 35mm slides and negatives. 4. Click one of the icons to select a configuration.
52 VISIONEER ONETOUCH 9520 PHOTO SCANNER USER’S GUIDE 9. When you’re satisfied with the image, click the Scan button. 10. When you’re finished scanning items, click Done to close the Advanced Interface. 11. If you’re using PaperPort, the PaperPort Scan message box opens. Click Done. When scanning is finished, a thumbnail of the scanned image(s) appears on the PaperPort desktop. Single page items appear as individual thumbnails on the PaperPort desktop. 12.
SCANNING FROM THE ADVANCED INTERFACE 53 ADJUSTING THE IMAGE ON THE ADVANCED INTERFACE You can adjust the scan settings on the Advanced Interface to produce the best possible image for the items you’re scanning. To adjust a setting: 1. On the left side of the Advanced Interface, select a configuration, for example, Color Configurations. 2. Click a setting in the list of settings, or click its corresponding button on the right side of the Advanced Interface.
54 VISIONEER ONETOUCH 9520 PHOTO SCANNER USER’S GUIDE The following figure shows an example of the Advanced Interface if you click the Resolution setting in the list, or click the Resolution button. Click to close the settings panel Note: The information in the scan settings list and the options you select on the various settings panels are interactive. As you change the settings on the panel, the numbers in the list on the left also change.
SCANNING FROM THE ADVANCED INTERFACE 55 ADJUSTING THE RESOLUTION Resolution determines the amount of detail you can see in the scanned image. The resolution setting for a scan is in dots-per-inch (dpi). The higher the resolution, the finer the details, however, higher dpi settings also take longer to scan and produce larger files sizes. Usually the higher resolution settings are used for precision work, such as photographs or fine artwork. The following figure shows the resolution options.
56 VISIONEER ONETOUCH 9520 PHOTO SCANNER USER’S GUIDE To adjust the resolution: 1. To use one of the preset resolutions for typical scanned items, click one of the options in the list. For example, to set the resolution for scanning a business card, select Business Card. That setting is preset to read small print on a typical business card. 2. To set the resolution manually, drag the Resolution slider to the left to decrease the resolution or to the right to increase it.
SCANNING FROM THE ADVANCED INTERFACE 57 ADJUSTING THE BRIGHTNESS AND CONTRAST Sometimes an item is scanned with the brightness and contrast set to be too light or too dark. For example, a note written with a light pencil may need to be scanned darker to improve legibility. The following figure shows the brightness and contrast options. Contrast is only available for Color and Gray Scale configurations. To adjust the brightness and contrast: 1.
58 VISIONEER ONETOUCH 9520 PHOTO SCANNER USER’S GUIDE ADJUSTING GAMMA, SATURATION, AND COLOR HUE If you’re using the Color Configuration to scan, you can adjust a group of color settings. Gamma controls the brightness of the color midtones, saturation is the strength or purity of a color, and hue is the color your eyes see as reflected from the image. The following figure shows the color options. To adjust the color settings: 1.
SCANNING FROM THE ADVANCED INTERFACE 59 ADJUSTING INPUT SIZE You can scan documents up to 8.5" by 11.69", but you can select other scan sizes, or adjust the input size to scan only specific sections of an image. For example, if you’re scanning a photograph and want to focus on one section, adjusting the input size removes the rest of the photograph from the final scanned image. The following figure shows the input size options. To manually set the image size: 1.
60 VISIONEER ONETOUCH 9520 PHOTO SCANNER USER’S GUIDE The following figure shows an example of a manually selected area. This is the image that appears on the PaperPort desktop when scanning is finished. The Scan Info box shows the size and position of the area. The selected scan area. Note that the selected area in the example has the number “1” in its upper left corner indicating it is your first selected area. You can select up to six separate areas on an image at a time.
SCANNING FROM THE ADVANCED INTERFACE 61 4. If the dotted line is not exactly where you want it, put the pointer on the line and drag the line. 5. If you want to remove the selected area and start over, click Remove on the Scan Info box. Note: Clicking Remove re-selects the entire 8.5" by 11.69" area. 6. When the settings are what you want, click Scan. THE SCAN INFO BOX The following figure shows the information on the Scan Info box: Tabs for each selected area.
62 VISIONEER ONETOUCH 9520 PHOTO SCANNER USER’S GUIDE CREATING A NEW ADVANCED INTERFACE PROFILE You cannot change the settings of the preset profiles in the Advanced Interface. However you can create new profiles and save them for future use. To create a new profile: 1. On the Advanced Interface, select one of the preset profiles, for example, Black&White Configurations>Custom. 2. Adjust the settings as required then click the Save As button. The Save Profile dialog box opens. 3.
SCANNING 35MM SLIDES AND NEGATIVES 63 SCANNING 35MM SLIDES AND NEGATIVES Your 9520 OneTouch scanner is specially designed to scan 35mm slides and negatives. You can scan both positive and negative film images. A BRIEF EXPLANATION Your scanner has sensors that capture the image of the item being scanned. Those sensors are located in the body of the scanner.
64 VISIONEER ONETOUCH 9520 PHOTO SCANNER USER’S GUIDE POSITIONING 35MM SLIDES IN THE MASK 1. Place the mask on the glass so the arrow on the mask labeled Use this mask for scanning 35mm slides is aligned with the arrow in the upper left corner of the scanner. Make sure the text on the mask faces up so it fits properly on the glass, aligned at the corner. 2. Follow the printed directions on the mask and place the 35mm slides horizontally into the slide holder. Calibration slot.
SCANNING 35MM SLIDES AND NEGATIVES 65 POSITIONING A 35MM NEGATIVE FILM STRIP 1. Slide the filmstrip into the 35mm negative mask and center the frame you want to scan in the opening. 2. Place the mask on the glass so the arrow on the mask labeled Use this mask for scanning 35mm negatives is aligned with the arrow in the upper left corner of the scanner. The 35mm negative holder also has a calibration slot next to it. Do not place items to be scanned in the calibration slot. 3. Close the lid.
66 VISIONEER ONETOUCH 9520 PHOTO SCANNER USER’S GUIDE SCANNING 35MM SLIDES OR NEGATIVES FROM THE TWAIN INTERFACE 1. Place the 35mm slides or negatives into the scanning mask and position the mask on the scanner glass. Close the scanner lid. 2. Open the TWAIN interface in one of the TWAIN applications on your computer.
SCANNING 35MM SLIDES AND NEGATIVES 67 4. Click the drop-down menu at the top of the Advanced Interface and choose the type of transparency to scan. ■ Scan Slide Using to scan 35mm slides. ■ Scan Negative Using to scan 35mm negative filmstrips. Choose a transparency scanning option: Scan Slide Using: for 35mm slides. Scan Negative Using: for negatives. The Advanced Interface then shows a representation of the type of transparency you are scanning.
68 VISIONEER ONETOUCH 9520 PHOTO SCANNER USER’S GUIDE This example of the Advanced Interface is for scanning 35mm slides. This example of the Advanced Interface is for scanning a filmstrip of 35mm negatives. 5. Click Preview to preview the image. The scanner scans a preview image of the slides or negatives. Selection boxes appear on the window. The selection boxes show where the scanner will scan for the images. Selection boxes appear around the images.
SCANNING 35MM SLIDES AND NEGATIVES 69 6. From the list on the left side of the interface, select the scan configuration for the images. Note that as you select different configurations, the images change based on the selection. For example, if you select Grey Scale, the images will be in shades of grey. Similarly, select a configuration for vivid colors and the image colors will be deeper and more intense. Click an icon to select a configuration—Color or Grey Scale.
70 VISIONEER ONETOUCH 9520 PHOTO SCANNER USER’S GUIDE To move a selection box, put the pointer in the box. The pointer becomes a four-headed drag arrow. Press and hold down the mouse button and drag the box so it fits exactly over the image. This example shows a selection box not aligned directly over the image. Put the pointer into the box. The pointer becomes a four-headed arrow. Press and hold down the mouse button then drag the box to its correct position.
SCANNING 35MM SLIDES AND NEGATIVES ■ 71 Remove an image from scanning—You may want to only scan one negative in a filmstrip. In that case, you remove selection boxes around the other images. To remove a selection box, select it by either clicking in it or clicking its tab on the Scan Info box, then click the Remove button on the Scan Info box. To remove a selection box, select it by clicking on it or clicking its tab, then click the Remove button. 8.
72 VISIONEER ONETOUCH 9520 PHOTO SCANNER USER’S GUIDE Configuring the Scanner When you first connect your scanner to a computer, the scanner’s software configures each OneTouch button with appropriate settings consisting of: a Destination Application, a Scan Configuration, and a Document Format. To change the settings, you reconfigure the buttons by selecting new options from the OneTouch Properties window. To open the OneTouch Properties window: 1. Click the OneTouch icon.
SCANNING 35MM SLIDES AND NEGATIVES 73 ABOUT THE ONETOUCH PROPERTIES WINDOW The OneTouch Properties window is where you can select new settings for the buttons. The tabs across the top of the window correspond to the buttons on the scanner. Note: Some of the options on the OneTouch Properties Window (and other OneTouch windows and dialog boxes) are “grayed out” and are not available. Grayed out options are not appropriate for your Visioneer 9520 scanner.
74 VISIONEER ONETOUCH 9520 PHOTO SCANNER USER’S GUIDE The settings on the Properties window are: Select Destination—The list of applications that can open to display the scanned image for the selected button. To configure the list of available applications, click the Options tab at the top of the dialog box and select the desired options. See “Selecting Options for a Button” on page 93 for more information. Select Configuration—The list of available scan configurations for the selected button.
SCANNING 35MM SLIDES AND NEGATIVES 75 Select Format—a set of file formats for the scanned image for the selected button. The formats are based on the type of Destination Application you select. This example shows the formats that apply to Microsoft Outlook. The button names indicate their file types. See “Selecting Format Options” on page 87 for more about the formats. Button tabs—click to select a button. The settings in the window then correspond to the selected button.
76 VISIONEER ONETOUCH 9520 PHOTO SCANNER USER’S GUIDE SELECTING NEW SETTINGS FOR A BUTTON For each of the five OneTouch buttons, you can select a new Destination Application, Scan Configuration, and Document Format. Select a format for the scanned image. Select a configuration for scanning the item. Select a software application as the destination to send scanned images. To select new settings for the Scanner Button: 1. Click the tab of the button you want to change. Each button has its own settings.
SELECTING NEW SETTINGS FOR A BUTTON 77 3. From the Select Configuration list, select a scan configuration. To scan in color, select one of the configurations indicated by the small color icon, such as the Scan Color Document configuration. The scan configuration list is preset for the application you select in the Select Destination list. If you select a different application, the configurations are for that application. However, you can create your own scan configurations as well. 4.
78 VISIONEER ONETOUCH 9520 PHOTO SCANNER USER’S GUIDE SETTING DESTINATION APPLICATION PROPERTIES The different types of Destination Applications have various properties that you can select. 1. On the OneTouch Properties window, click a Destination Application. 2. Click the Properties button. Click a Destination Application. Click the Properties button. A OneTouch 4.0 Link Properties dialog box opens for the type of Destination Application you selected, and the available options are for that application.
SELECTING NEW SETTINGS FOR A BUTTON 79 PAPERPORT PROPERTIES These properties apply to PaperPort, and are for designating the folder to receive your scanned items. 1. Select the PaperPort folder where you want the file of the scanned image to be located. 2. Click OK. 3. Click OK or Apply on the OneTouch Properties window. When PaperPort opens after you finish scanning, the thumbnails of your scanned documents are on the PaperPort Desktop in that folder.
80 VISIONEER ONETOUCH 9520 PHOTO SCANNER USER’S GUIDE TEXT DOCUMENTS PROPERTIES These properties apply to Microsoft Word, Microsoft Excel®, and the other applications indicated by their icons in the list. The properties apply to the OCR settings for the applications. 1. Click in the OCR settings boxes for the options you want. The options will apply to all the applications in the group.
SELECTING NEW SETTINGS FOR A BUTTON 81 3. Click Browse to find the application you want to add to the list. When you select the application using the Browse button, steps 1 and 2 on the dialog box are automatically filled in, and the application icon appears in step 3. 4. Select the icon in Step 3 of the dialog box. That is the icon that will appear in the OneTouch Destination List. 5. In step 4 of the dialog box, select the file formats that the application will accept.
82 VISIONEER ONETOUCH 9520 PHOTO SCANNER USER’S GUIDE IMAGE DOCUMENTS PROPERTIES These properties apply to image processing applications such as Microsoft Paint. 1. Click in the Color document handling settings boxes for the options you want. The options will apply to all the applications in the group. ■ Convert Bitmaps using Screen resolution—Use this option to ensure that an image will fit on the computer’s screen.
SELECTING NEW SETTINGS FOR A BUTTON 83 2. To add another application to the list, click the Add Application button. See the steps on page 81 to add an application to the list. 3. Click OK. 4. Click OK or Apply on the OneTouch Properties window. 5. Click Refresh on the OneTouch Properties window. STORAGE PROPERTIES These properties apply to the Destination Application named Transfer to Storage. If a CD burner is attached to your computer, you can also use this dialog box to start the Burn to CD process.
84 VISIONEER ONETOUCH 9520 PHOTO SCANNER USER’S GUIDE 1. Click the Storage Layout options you want. ■ All documents are in the root—The scanned documents are saved in the root of the folder specified in the Storage Location. ■ Documents are put into folders by month, week, or type— Folders are created based on your selection (month, week, or type) and the scanned documents are saved in those folders.
SELECTING NEW SETTINGS FOR A BUTTON 85 EMAIL PROPERTIES These properties apply to email applications so you can specify the folder for documents that you will attach to an email message. Microsoft Outlook® will accept direct attachment of documents to a blank email message as soon as scanning is finished, but other email applications do not.
86 VISIONEER ONETOUCH 9520 PHOTO SCANNER USER’S GUIDE 3. If you need to change your email client, or any other internet options, click the Internet Options button. The Windows Internet Options Control Panel opens. Click the Programs tab and choose a new email client from the Email list. These are the standard Windows Internet options. Please see your Windows documentation for more information about Internet options.
SELECTING NEW SETTINGS FOR A BUTTON 87 SELECTING FORMAT OPTIONS The option that you select determines the file format of the scanned document. Appropriate format options and file types are available for the type of Destination Application selected for the button. The available options are for images and text. Image Formats Text Formats; TEXT is only one of several text formats available. IMAGE FORMATS Select an image file format for photos, artwork or other documents that you want to save as images.
88 VISIONEER ONETOUCH 9520 PHOTO SCANNER USER’S GUIDE To select a JPEG or PDF file size: 1. Select JPG or PDF as the format. 2. Right-click on the JPG or PDF icon. A menu opens. 3. Choose the file size/image quality option for your scanned images. Minimize Size—Smallest file size, lowest image quality. Normal—Medium file size, some loss of image quality. Maximum Quality—Largest file size, no loss of image quality.
SELECTING NEW SETTINGS FOR A BUTTON 89 TEXT FORMATS The Text Formats are for text file types. The names of the formats indicate their file types. Selecting the text format option also selects OCR processing as an automatic step for scanning. Therefore, when you scan a document with the text format selected, the text portions of the document are automatically converted to editable text.
90 VISIONEER ONETOUCH 9520 PHOTO SCANNER USER’S GUIDE To select a file type for the text format: 1. Select the Destination Application. 2. Right-click on the text format icon. A menu opens. The following figure shows an example for the TEXT format with Microsoft Outlook selected as the Destination Application. The menu options depend on the type of Destination Application you select. 3. Choose the file type you want for the text format.
SELECTING NEW SETTINGS FOR A BUTTON 91 SCANNING WITH OPTICAL CHARACTER RECOGNITION (OCR) Optical Character Recognition (OCR) converts text and numbers on a scanned page into editable text and numbers. You can then work with the text and numbers to edit, spellcheck, change font or type size, sort, calculate, and so forth. To scan with OCR: 1. Select a Destination Application that has one of the Text formats (TEXT, RTF, XLS, or HTML). 2. Scan the document.
92 VISIONEER ONETOUCH 9520 PHOTO SCANNER USER’S GUIDE 4. Select the option you want for the OCR conversion of your documents. Auto orient page—Select this option to check the page orientation and automatically rotate an improperly oriented page image so the text is recognizable by the OCR process. Single column output—Select this option to produce a single column of text in the Destination Application, even if the original image had multiple columns of text. 5. Click OK.
SELECTING NEW SETTINGS FOR A BUTTON 93 SELECTING OPTIONS FOR A BUTTON The OneTouch Options determine the types of Destination Applications available for a button, as well as the location of the files of your scanned items. To select options: 1. Open the OneTouch Properties window and click the Options tab. Options tab. Click the arrow to see the menu to choose the button. 2. Click the menu arrow and choose the button for new options. 3.
94 VISIONEER ONETOUCH 9520 PHOTO SCANNER USER’S GUIDE Select Destinations—Select this option to individually choose the types of applications to include in the list of Destination Applications. Check the boxes for the type of application to include. Document Management includes PaperPort and other applications for processing and keeping track of your scanned documents. Image Editors include Microsoft Paint and other drawing and graphics applications.
SELECTING NEW SETTINGS FOR A BUTTON 95 Create copies of scanned documents—Sometimes the image of a scanned document is only saved as a temporary file until its Destination Application is finished using it. In those cases you may or may not want an additional, permanent copy saved on your hard drive. For example, if you scan a picture to an email application, the scanned image is saved as a temporary file, then attached to the email, and the email is sent.
96 VISIONEER ONETOUCH 9520 PHOTO SCANNER USER’S GUIDE Folder Copy Options—This section of the dialog box sets the location for copies of your scanned documents and how you want to group them. To specify another location for copies, click the Browse button and find the folder you want to use for the copies. Select the grouping option for the documents. The Group by button option groups the documents under the name of the scanner button.
SELECTING NEW SETTINGS FOR A BUTTON 97 CREATING A NEW SCAN CONFIGURATION The scan configurations are where you select the scanning resolution, brightness, mode (color, black&white, or grayscale), and a number of other settings. The Scan Configurations. The Lock Icon. Click New to create a new Scan Configuration. Note the lock icon on the preset configurations. Although you can unlock and edit the preset configurations, we recommend that you leave them locked, and only add new configurations.
98 VISIONEER ONETOUCH 9520 PHOTO SCANNER USER’S GUIDE buttons set for text editing applications. Thus, you can create specific sets of scan configurations for specific functions and they appear only when appropriate. 3. Click the New button. If you want to start from the settings of another configuration, select the configuration, then click the Copy button. If the Scan Settings tab is not selected, click it. 4. On the Scan Configuration Properties dialog box, type a name.
SELECTING NEW SETTINGS FOR A BUTTON 99 Color to scan color photographs and other color items. Color scans have the largest file size. ■ Resolution—Drag the slider to the right or left to adjust the dots per inch (dpi) of the resolution. The maximum resolution is 2400 dpi; the minimum is 50 dpi. The higher the dpi setting, the sharper and clearer the scanned image. However, higher dpi settings take longer to scan and produce larger files for the scanned images.
100 VISIONEER ONETOUCH 9520 PHOTO SCANNER USER’S GUIDE ■ Size—Click Standard, click the menu arrow and choose a page size from the list, or click Custom and enter the horizontal and vertical page dimensions in the boxes. The maximum size is 8.5" by 11.69". The units of measurement can be inches or millimeters. Click the name of the units, inches or millimeters, to toggle between them. ■ Improvements and Settings—Only the options that apply to the selected Destination Application are available.
SELECTING NEW SETTINGS FOR A BUTTON 101 8. Click the Advanced Settings tab. The options of the Advanced Settings tab are for the Color or Grayscale scanning mode. Saturation is the strength or purity of a color, hue is the color your eyes see as reflected from the image, and gamma controls the brightness of the midtones of the color. 9. Drag the sliders to the left and right to change the color settings. As you do, the image changes to show the effects of the new settings.
102 VISIONEER ONETOUCH 9520 PHOTO SCANNER USER’S GUIDE THE DEVICE SETTINGS TAB A Device Settings tab appears on the Scan Configurations dialog box when your selected Destination Application sends the scanned image to a printer, fax application, or other device. You use the options on the Device Settings tab to select settings for the device. 1. Click on the Device Settings tab.
SELECTING NEW SETTINGS FOR A BUTTON 103 Collate copies—If you’re printing more than one page, collate the copies. Enter the number of copies in the Copies box. Advanced—click to see additional settings for the device. The dialog that opens is specific to the device. For example, if the device is your printer, the dialog box is your printer’s setup settings. 2. Click OK or Apply.
104 VISIONEER ONETOUCH 9520 PHOTO SCANNER USER’S GUIDE 2. Click the Storage Layout options you want. All documents are in the root—The scanned documents are saved in the root of the folder specified in the Storage Location. Documents are put into folders by month, week, or type— Folders are created based on your selection (month, week, or type) and the scanned documents are saved in those folders. New folders are created for each month and week so you can keep track of when you scanned the documents.
SELECTING NEW SETTINGS FOR A BUTTON 105 EDITING OR DELETING SCAN CONFIGURATIONS To edit or delete a scan configuration: 1. Open the OneTouch Properties window. 2. Select the scan configuration you want to edit or delete. The selection must be an unlocked configuration. The following example shows a new scan configuration that was created named “Scan for Light Text.” Select the scan configuration to edit or delete. It must be unlocked, as indicated by not having a lock displayed here. 3.
106 VISIONEER ONETOUCH 9520 PHOTO SCANNER USER’S GUIDE 4. To edit the configuration, click the Edit button. The Scan Configuration Properties dialog box opens for that configuration. You can make changes to a configuration, but for the changes to be saved, the configuration must first be unlocked. Click the Lock icon to unlock the configuration. Clicking it toggles between locking and unlocking the configuration. The key icon indicates the configuration is unlocked.
SELECTING NEW SETTINGS FOR A BUTTON 107 CONFIGURE BEFORE SCAN You can set up a button so that, when you press that button or click it on the Button Panel, a different scanning interface opens before the scanning starts.You can then use the interface to select new settings or scanning options. To set up a button for this capability, you select Configure Before Scan as its Scan Setting.
108 VISIONEER ONETOUCH 9520 PHOTO SCANNER USER’S GUIDE 5. Select the scan configuration Configure Before Scan. Select the button. Select Configure Before Scan. Right-click on Configure Before Scan to get the menu, and choose the interface to use for scanning. 6. Right-click on Configure Before Scan and choose an interface to use for configuring before scanning. TWAIN—The Basic Interface or Advanced Interface opens for you to configure the scanning.
SELECTING NEW SETTINGS FOR A BUTTON 109 TO SCAN USING CONFIGURE BEFORE SCAN 1. Put the document or photo on the flatbed glass. 2. Click on the button you set to use the Configure Before Scan option. In the example shown on the previous page, the Scan button has been setup to use the Configure Before Scan option. 3. The Basic TWAIN interface will open. 4. Choose your scan settings, such as the Picture Type of Color, Grayscale, or Black & White, Resolution in DPI, and Page Size. 5.
110 VISIONEER ONETOUCH 9520 PHOTO SCANNER USER’S GUIDE TO SCAN MULTIPLE PAGES You can use Configure Before Scan to create multi-page documents when scanning from the flatbed glass. First, please make sure your OneTouch Properties are set to scan as a TIFF, PDF or a text file type. The image file types BMP and JPG do not support multi-page documents. 1. Click on the Scan button in the OneTouch Button panel or press the Scan button on the scanner. 2.
SELECTING NEW SETTINGS FOR A BUTTON ■ 111 Yes—scanning stops and all pages scanned in this batch, up to this point, will be deleted. The TWAIN interface will close and you can restart your scan from the beginning. Choose Yes if the TWAIN scan settings are incorrect for your current scanning batch. For instance, if the Picture Type is Black & White but your documents are in color, choose yes to delete any scanned pages, then select the correct Picture Type and restart the scanning.
112 VISIONEER ONETOUCH 9520 PHOTO SCANNER USER’S GUIDE SCAN AND BURN TO A CD If you have a CD burner attached to your computer, you can scan directly from your scanner onto a CD. Note: This feature is available only on computers running Windows XP or Windows Vista. To scan and burn to a CD: 1. Put a blank CD into your computer’s CD Drive. 2. Open the OneTouch Properties window. 3. Click the Copy button tab, or other button if you’ve set it up to scan and burn to a CD. 4.
SELECTING NEW SETTINGS FOR A BUTTON 113 5. Choose a Page Format and a Scan Configuration. See the notes on page 114 for more information about the scan configurations when the Destination Application is Burn to CD. 6. Click OK. The OneTouch Properties window closes. 7. Now start scanning using the button you selected to use to scan and burn to CD. When scanning is finished, a bubble message on the screen tells you that files are waiting to be burned to the CD. 8.
114 VISIONEER ONETOUCH 9520 PHOTO SCANNER USER’S GUIDE Note: Until you click Burn to CD these files are stored in your computer at C:\Documents and Settings\\Local Settings\Application Data\Microsoft\CD Burning. This is where Windows XP and Windows Vista stores all files waiting to be burned to a CD by the automatic CD writing wizard. If other files are also waiting in this location, they will get written with the OneTouch files on the CD.
SELECTING NEW SETTINGS FOR A BUTTON 115 SCANNING WITH EVENT FORWARDING You use event forwarding to specify another application to use for scanning before you start. A typical example is if you want to use another application’s interface to select scanning options before you start scanning. When you press the scanner button designated for event forwarding, the scanner waits to start scanning until you select the application to use.
116 VISIONEER ONETOUCH 9520 PHOTO SCANNER USER’S GUIDE 5. Click OK. The OneTouch Properties window closes. 6. Start scanning using the button you selected for event forwarding. A dialog box opens for you to select the application to use for scanning. 7. Select the application in the box and click OK. Now the application you selected opens and you can continue the scanning from that application’s interface.
SELECTING NEW SETTINGS FOR A BUTTON 117 CREATING AN HTML WEB PAGE FROM YOUR SCANNED DOCUMENTS You can convert scanned pages to HTML format for posting directly to your web site. Those pages are then viewable by visitors to your web site without the need for any internet plug-ins or other special processing. This is, essentially, from your scanner to a web-ready format in one automatic step. To scan and create an HTML web page: 1. Open the OneTouch Properties window. 2.
118 VISIONEER ONETOUCH 9520 PHOTO SCANNER USER’S GUIDE 6. Click OK. The OneTouch Properties window closes. 7. Put the document on the scanner glass and close the lid. 8. Press the scanner button you’ve set up for HTML scanning. When scanning is finished, the document is first converted to editable text using the OCR process, then is converted into an HTML format. Microsoft Internet Explorer then opens showing your converted page.
SELECTING NEW SETTINGS FOR A BUTTON 119 TRANSFERRING SCANNED DOCUMENTS TO STORAGE With the Transfer to Storage scanning process, you can scan documents and save them in a folder in one step. The process is ideal for archiving documents without having to manually save or process them in any other way. If you choose a text format for the file format, the documents are also automatically converted by the OCR process into editable text and numbers before they are stored.
120 VISIONEER ONETOUCH 9520 PHOTO SCANNER USER’S GUIDE Note: The Storage Location shown in the example above is the default place where your scanned documents are stored if you haven’t created any new scanning configurations or selected a new storage location. If you create a new scan configuration that has its own storage location and you use that configuration to scan, your scanned documents will be stored at the new location instead of the default.
SELECTING NEW SETTINGS FOR A BUTTON 121 4. Choose a Scan Configuration. 5. Click OK. 6. Now start scanning using the Archive button on the scanner or any other button that you have set up for archiving. When scanning is finished, the documents are saved in the text file format and in the location you specified. SCANNING TO MULTIPLE FOLDERS When archiving documents with the Archive button with the Transfer to Storage as the Destination Application, you can scan the documents to multiple folders.
122 VISIONEER ONETOUCH 9520 PHOTO SCANNER USER’S GUIDE 4. Select Transfer to Storage as the Destination Application. Select Transfer to Storage. Click the New button. 5. Click the New button. The Scan Configuration Properties dialog box opens. 6. Click the Scan Settings, Page Settings, and Advanced Settings tabs, and select the settings you want. To help you remember which folder it is, give the new configuration a name that indicates the folder name, such as “Storage for Business Receipts.
SELECTING NEW SETTINGS FOR A BUTTON 123 7. Click the Storage Options tab. This is where you set the different folder locations for the new configurations. 8. Click the Browse button. 9. Select the folder you created for storing the scanned documents. If you haven’t created the folder yet, you can click the Make New Folder button and type the name for the new folder.
124 VISIONEER ONETOUCH 9520 PHOTO SCANNER USER’S GUIDE 10. Click OK. The selected folder will now be set as the Storage Location, such as “Business Receipts.” 11. Click OK. The new configuration is now listed as a Transfer to Storage configuration. 12. Repeat the process to create additional new configurations, such as one named “Storage for Personal Receipts.” 13. Make sure to designate separate folders as the Storage Locations for the new configurations.
SELECTING NEW SETTINGS FOR A BUTTON 125 The new configurations apply to the Transfer to Storage Destination Application. Scan to multiple storage folders: 1. Open the OneTouch Properties window. 2. Click the Archive tab (or other tab if you set up another button for archiving). 3. Make sure Transfer to Storage is selected as the Destination Application. 4. Select one of the configurations you created for storage. 5. Click OK. The OneTouch Properties window closes.
126 VISIONEER ONETOUCH 9520 PHOTO SCANNER USER’S GUIDE 7. When scanning is finished, open the OneTouch Properties window again and select the other configuration you created for storage. 8. Click OK. The OneTouch panel will show the name of the other configuration. 9. Now scan the next set of documents. When scanning is finished, the two sets of documents are stored in the two separate folders.
SELECTING NEW SETTINGS FOR A BUTTON 127 TO TRANSFER DOCUMENTS TO A SERVER OR MAPPED DRIVE When selecting the storage location for scanned documents, you can select a local folder, or a folder on a server or mapped drive. You select a mapped drive using the Browse button. 1. See “Scanning to Multiple Folders” on page 121 or “Transferring Scanned Documents to Storage” on page 119 for the steps to select the Transfer to Storage options. 2. On either the OneTouch 4.
128 VISIONEER ONETOUCH 9520 PHOTO SCANNER USER’S GUIDE 3. Select a storage location on the mapped drive or server for the scanned documents. Servers and mapped drives are represented by an icon that indicates its network connection. Select a mapped drive or server as indicated by the icon. 4. Click OK. Now when you scan using Transfer to Storage as the Destination Application, the documents are stored on the server or mapped drive.
SELECTING NEW SETTINGS FOR A BUTTON 129 CHECKING THE HARDWARE AND SETTING THE LAMP POWER SAVE MODE 1. Right-click on the OneTouch icon and choose Show Hardware from the pop-up menu. You can also click the Hardware icon at the top of the OneTouch Button Panel. The Hardware icon. If the Hardware View of the panel is already open you can also right-click on the Visioneer 9520 icon. The Hardware Properties dialog box opens and shows information about your Visioneer 9520 scanner.
130 VISIONEER ONETOUCH 9520 PHOTO SCANNER USER’S GUIDE 2. Click the Properties button. Your scanner has a built-in power saving feature that is set to power down after a period of idle time. You can set the power save mode from 1 minute to a maximum of 10 hours.
SELECTING NEW SETTINGS FOR A BUTTON 131 3. Click the arrows for the Enable power save mode setting to choose a time setting. To turn the lamp on and off manually without turning off power to the scanner, click the Lamp On or Lamp Off buttons. To manually turn on the Transparency Adapter lamp, click TA Lamp On. To manually turn off the TA Lamp, close the Device Configuration dialog box and the Hardware Properties dialog box, then reopen them again. The TA Lamp will turn off.
132 VISIONEER ONETOUCH 9520 PHOTO SCANNER USER’S GUIDE SCANNING WITH THE WINDOWS IMAGE ACQUISITION Microsoft Windows includes its own set of options—known as Windows Image Acquisition (WIA)—for acquiring images from scanners, digital cameras, and other digital devices. The instructions in this section are for scanning using WIA on computers running Windows XP. If your computer is running an earlier version of Windows, it cannot use WIA to scan.
SCANNING WITH THE WINDOWS IMAGE ACQUISITION 133 2. From the File menu choose From Scanner or Camera. The scan window opens. Use this window to select scanning options and start the scan process. 3. Click the button most appropriate for the item you’re scanning. 4. Click Preview to preview the image before scanning. The image is displayed on the right side of the window.
134 VISIONEER ONETOUCH 9520 PHOTO SCANNER USER’S GUIDE 5. If necessary, adjust settings of the previewed image as desired: ■ Change the button selection for the type of image. ■ Adjust the custom settings; refer to the next section, “Fine Tuning Your Scans”. ■ Change the size of the scanned image. To do this, click and hold the mouse pointer over one of the four sizing-boxes on the corners of the previewed image. Then drag the box to increase or decrease the size of the image. 6. Preview the image again.
SCANNING WITH THE WINDOWS IMAGE ACQUISITION 135 FINE TUNING YOUR SCANS You can select new settings before you scan an item to fine tune exactly how you want to scan a particular item. To select the scanner settings before you scan: 1. On the scan window, click Adjust the quality of the scanned picture. The Advanced Properties dialog box opens.
136 VISIONEER ONETOUCH 9520 PHOTO SCANNER USER’S GUIDE 2. Select the options for scanning. Brightness and Contrast—Drag the sliders to the right or left to adjust the brightness and contrast of the scanned image. The Contrast setting does not apply to the setting Black and White picture or text. Resolution (DPI)—Click the menu arrow and choose the dots per inch (dpi) of the resolution. The maximum resolution is 600 dpi; the minimum is 50 dpi.
CLEANING THE SCANNER GLASS 137 Maintenance This section contains information on cleaning, troubleshooting, uninstalling, and scanner specifications. CLEANING THE SCANNER GLASS Scanning items that have excessive amounts of dirt or dust may dirty the glass. To ensure the best quality scanned item, wipe the scanner glass with a soft clean cloth to rid the glass of dust or other debris.
138 VISIONEER ONETOUCH 9520 PHOTO SCANNER USER’S GUIDE • Is the scanner’s locking tab in the locked position? Slide the locking tab to the unlocked position. If you tried to scan with the scanner locked, you must restart your computer after unlocking the scanner. • Did you restart the computer after installing the software? If you didn’t restart the computer, it may not have loaded all of the software files. Try restarting your computer.
TROUBLESHOOTING 139 Problem: The installation will not complete successfully. If installation finishes, the scanner’s OneTouch 4.0 options do not seem to work properly. What do I do? A likely cause is that some driver programs are already installed on your computer for another scanner. They are interfering with the installation and OneTouch options, and you need to remove those other drivers and re-install your Visioneer 9520 Photo scanner.
140 VISIONEER ONETOUCH 9520 PHOTO SCANNER USER’S GUIDE HOW TO UNINSTALL YOUR SCANNER To uninstall the Visioneer 9520 Photo scanner, remove the OneTouch 4.0 scanner software, and PaperPort, or other scanning software provided with your scanner. UNINSTALLING THE ONETOUCH 4.0 SCANNER SOFTWARE 1. On the Windows taskbar, click Start, point to Settings, then click Control Panel. 2. Windows 2000 or XP: Double-click the Add or Remove Programs icon. Windows Vista: Double-click the Programs and Features icon. 3.
TO INSTALL ANOTHER DRIVER 141 TO INSTALL ANOTHER DRIVER Before you can install another driver for your scanner, you must remove the currently installed driver first. Then the new driver can be installed. 1. Uninstall the OneTouch 4.0 driver. a. Open the Windows Control Panel. b. Windows 2000 and XP: Double-click the Add or Remove Programs icon. Windows Vista: Double-click the Programs and Features icon. c. Select OneTouch 4.0 then click on the Remove button. d.
142 VISIONEER ONETOUCH 9520 PHOTO SCANNER USER’S GUIDE VISIONEER 9520 PHOTO SCANNER SPECIFICATIONS Bit Depth Scanning resolution Maximum Item sizes Scanner dimensions Height Width Length Weight USB Standard Operating temperature Relative humidity Power Adaptor USB Cable 48-Bit color (internal), 16-Bit gray (internal), 1-Bit line art/text Optical resolution: 4800 x 9600 dpi 8.5 x 11.69 inches (21.6 x 29.7 cm) 2.6 inches (6.6 cm) 11.9 inches (30 cm) 17 inches (43 cm) 5.8 pounds (2.64 kg) Hi-Speed USB 2.
VISIONEER 9520 PHOTO SCANNER PARTS LIST VISIONEER 9520 PHOTO SCANNER PARTS LIST Please use the following part names and numbers when ordering replacements for your scanner.
144 VISIONEER ONETOUCH 9520 PHOTO SCANNER USER’S GUIDE
INDEX INDEX Numerics 35mm negative filmstrip scan 63 35mm slide scan 63 A Advanced Interface 45, 50 adjust settings 53 Advanced Interface button 50 Advanced Properties 135 aspect ratio 102 AutoRotate image 102 B Basic Interface 37, 45, 46 Black&White 51, 98 blurred image 56 BMP 87 Brightness 136 brightness 57, 99 brightness slider 99 Burn to CD 83, 112 Destination Application 113 button options 93 button settings 76 C calibration slot 64 CD-ROM drive 4 Color 51, 99 color hue 58 options 58 color space 12
INDEX 146 improvements and settings 100 input size 59 installation 5 invert image 100 J JPG 87 JPG file size 88 L Lamp power save mode 131 Link Properties 78 locking tab 3, 7 M Microsoft Internet Explorer 118 Microsoft Outlook 85 Moire Patterns 100 moire patterns 56 monitor 4 O OCR 89 columns 92 optical character recognition 91 storage 120 OCR button 26 OCR options 91 OneTouch 25 Destination Application 25 Properties 25 Settings 25 OneTouch Button Panel 27 OneTouch buttons configuring 72 OneTouch icon
INDEX slide scan 63 spreadsheet format 90 OCR 91 Sti Event Forwarding 94 Storage and CD-R/W 94 Storage Properties 83 Straighten Image 100 T Text Documents Properties 80 Text Editors 94 text file format 89 Text Formats 89 thumbnail image 48 TIFF 87 Transfer to Storage 119 transparency scan 63–71 TWAIN 107 TWAIN standard 32 U uninstall 140 W WIA 108, 132 Windows Image Acquisition 132 Windows Image Acquisition (WIA) 107 Windows XP 132 X xls file format 90 147
INDEX 148
visioneer Copyright © 2007 Visioneer, Inc.
