Visioneer OneTouch 9220 USB Scanner Installation Guide FOR WINDOWS
COPYRIGHT INFORMATION Copyright © 2003 Visioneer, Inc. Reproduction, adaptation, or translation without prior written permission is prohibited, except as allowed under the copyright laws. The Visioneer brand name and logo are registered trademarks of Visioneer, Inc. The PaperPort brand name and logo are registered trademarks of ScanSoft, Inc. Microsoft is a U.S. registered trademark of Microsoft Corporation. Windows is a trademark of Microsoft Corporation.
i TA B L E O F C ON T E N T S Welcome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 What’s in the Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 The Visioneer 9220 USB Scanner . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 What You Need . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ii Adjusting the Settings in the Scan Manager Pro . . . . . . . . . . . . . . . . 40 Adjusting the Resolution and Sharpness . . . . . . . . . . . . . . . . . . 41 Adjusting the Brightness and Contrast . . . . . . . . . . . . . . . . . . . . 43 Adjusting Gamma, Saturation, and Color Hue . . . . . . . . . . . . . 45 Adjusting Output Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47 Saving a Custom Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
WELCOME Congratulations on purchasing your Visioneer OneTouch 9220 USB scanner. With this scanner you can quickly scan paper documents, color photos, 35mm slides, and negatives to place their electronic images on your computer. WHAT’S IN THE BOX Before starting the installation, check the contents of the box to make sure that all parts are included. If any items are missing or damaged, contact the dealer where you purchased the scanner.
2 VISIONEER ONETOUCH 9220 USB SCANNER INSTALLATION GUIDE THE VISIONEER 9220 USB SCANNER Document cover Transparency light source Glass Reference marks OneTouch buttons panel Status light OneTouch buttons Custom Print Email OCR To PaperPort USB port Option port TPA cable Power jack
THE VISIONEER 9220 USB SCANNER 3 Document cover—Protects the document from light and contamination. Transparency light source—Shines light through 35mm slides or negative transparencies and then through the glass onto the scanning sensors in the body of the scanner. Glass—Items are placed face down aligned at the arrow symbol in the upper-left corner. Reference marks—Marks on the border of the glass show where to align various paper sizes. OneTouch button panel—Allows scanning directly from the scanner.
4 VISIONEER ONETOUCH 9220 USB SCANNER INSTALLATION GUIDE WHAT YOU NEED An IBM-compatible Pentium PC with: ■ A CD-ROM drive ■ An available Universal Serial Bus (USB) port; 1.1 or 2.0 ■ Microsoft Windows operating system: 98, 2000, Me, or XP ■ Available internal memory (RAM) as follows: ■ ■ 64 MB or more ■ 128 MB recommended for Windows XP 200 MB of free hard disk space Note: The new USB 2.0 ports operate at higher speeds than USB 1.1 ports. If your computer is not equipped with USB 2.
DOCUMENTATION 5 DOCUMENTATION Your scanner is delivered with the following documentation: ■ Quick Install Card—abbreviated installation instructions. ■ Visioneer OneTouch 9220 Scanner Installation Guide—detailed installation, scanning, configuration, and maintenance information. ■ Getting Started Guide—simplified installation instructions. ■ ScanSoft PaperPort User’s Guide—on the Installation CD; contains detailed feature and configuration information.
6 VISIONEER ONETOUCH 9220 USB SCANNER INSTALLATION GUIDE Installing Installation is a quick, three-step process: ■ Install the software ■ Connect the scanner ■ Check out your scanner STEP 1: INSTALL THE SOFTWARE Note: You must install the PaperPort software before connecting the scanner to the computer. Otherwise the correct software to run your scanner will not be installed and it may not scan properly. To install the software: 1.
STEP 1: INSTALL THE SOFTWARE 7 3. On the installation menu, select Install ScanSoft PaperPort and Scanner Driver. If a message window opens instructing you to restart your computer, click Restart. 4. On the PaperPort 8.0 SE Setup window, click Next. 5. Read the ScanSoft license agreement. If you accept the terms, select I accept the terms in the license agreement, and then click Next. 6. On the User Information window, accept the current values or enter new information, and then click Next. 7.
8 VISIONEER ONETOUCH 9220 USB SCANNER INSTALLATION GUIDE 13. When you see the Connect Scanner window, do NOT click Finish. Leave the window open and proceed to the next section, “Step 2: Connect the Scanner”. STEP 2: CONNECT THE SCANNER Your OneTouch 9220 scanner connects to any available USB 1.1 or USB 2.0 port. Check your computer’s user guide for port locations. Note: You do not have to shut off the power to your computer when connecting the scanner to a USB port. To connect the scanner to a USB 1.
STEP 2: CONNECT THE SCANNER 9 2. Verify that the TPA cable is securely plugged into the Option port on the back of the scanner. 3. Plug one end of the USB cable into an available USB 1.1 or USB 2.0 port on the computer. 4. Plug the other end of the USB cable into the scanner’s USB port. USB If the plug does not attach easily, make sure that you are plugging it in correctly. Do not force the plug into the connection. Some computers have keyboards with USB ports.
10 VISIONEER ONETOUCH 9220 USB SCANNER INSTALLATION GUIDE 5. Plug the power adapter cable into the power jack on the back of the scanner and then plug the power adapter into an AC (wall) outlet. The following diagram shows the scanner connected to a computer. The status light on the front of the scanner is illuminated, indicating the scanner is receiving power.
STEP 3: CHECK OUT YOUR SCANNER 11 7. On the Install Completed window, click Finish. Your scanner is ready to scan. 8. Before proceeding to “Step 3: Check Out Your Scanner”, you can install additional software from the installation CD, or view and print the scanner and PaperPort documentation. Remove the CD from the computer when you are finished and store it in a safe place.
12 VISIONEER ONETOUCH 9220 USB SCANNER INSTALLATION GUIDE 3. Click OK to close the dialog box. Your scanner is ready to scan. IF THE SCANNER IS NOT PROPERLY CONNECTED If the scanner icon on the Windows taskbar has a red “X” through it, the scanner is not properly connected. Check for one of these possible problems: • Is a cable loose or not plugged in securely? Inspect all cable connections. Make sure all the cables are plugged in securely.
STEP 3: CHECK OUT YOUR SCANNER 13 Please see the Readme file in the PaperPort directory on your computer’s hard drive. The Readme file contains additional information that may help you diagnose problems connecting the scanner. Also see “Troubleshooting” on page 55 for more information. Note: The scanning lamp under the scanner’s glass needs to warm up before you can scan. A status message lets you know when the lamp is ready.
14 VISIONEER ONETOUCH 9220 USB SCANNER INSTALLATION GUIDE Scanning This chapter describes how to scan paper documents as well as 35mm slides and negatives. There are three ways to scan a paper item: ■ Press a OneTouch button on the scanner ■ Click a button on the button panel ■ Click a button from the PaperPort software Note: To scan transparencies you must scan from PaperPort (or other TWAIN software). See “Scanning 35mm Slides and Negatives” on page 22 for details.
PRESSING A ONETOUCH BUTTON ON THE SCANNER 15 During scanning, the scan progress window shows a copy of the image, as illustrated below: When the scan is complete, the scanned image appears in the destination application. In this example, the destination application is the PaperPort desktop. ABOUT THE ONETOUCH BUTTONS The OneTouch buttons are preconfigured for typical scanning tasks. To change button settings, see “Configuring the Buttons” on page 28.
16 VISIONEER ONETOUCH 9220 USB SCANNER INSTALLATION GUIDE Button Function Preconfigured Settings Copy/Print Prints the scanned item in black and white on your printer/copier at the printer/ copier’s default resolution. Custom Scans the item as a color photo and displays it in an image processing application. Note: If a button is not preconfigured, the Configuration dialog box opens when you press that button so you can configure it manually.
SCANNING FROM THE PAPERPORT SOFTWARE 17 4. To close the button panel, click the scanner icon in the button panel’s upper-left corner. The icons on the buttons indicate the destination application for the scanned image. For example, in the illustration above, the icon on the email button is for the email application, MS Outlook. When you click the email button, the item is scanned, and then MS Outlook opens. In this case, the scanned image automatically becomes an attachment to an email message.
18 VISIONEER ONETOUCH 9220 USB SCANNER INSTALLATION GUIDE SCANNING FROM A COMPUTER RUNNING WINDOWS 98, ME, OR 2000 To scan an item from PaperPort: 1. Open the scanner cover, place the item face down onto the lower left edge of the scanner glass, and then close the cover. 2. On the Windows taskbar, click Start, point to Programs, point to ScanSoft PaperPort 8.0, and then click PaperPort. The PaperPort desktop opens. 3. Click the Scan icon on the PaperPort command bar.
SCANNING FROM THE PAPERPORT SOFTWARE 19 Choose a scanning option. Scan Reflective Using is for scanning paper items. The other options are for transparencies. Click an icon to select a configuration—Color, Grey Scale, or Black&White. Clicking the “+” sign in front of Custom shows Custom’s scan settings. Click a setting in the list to change it. The setting’s options appear on the right side of the Scan Manager Pro where you can make changes if necessary.
20 VISIONEER ONETOUCH 9220 USB SCANNER INSTALLATION GUIDE Your OneTouch 9220 scanner has built-in analytical capabilities that find the optimum combination of settings for the item you’re scanning. When you click AutoScan, the scanner analyzes the image and adjusts the settings to produce the optimal image. The Scanning dialog box opens while the scan is in progress. Check marks indicate the completion of a processing step. The image appears as a thumbnail on the PaperPort desktop.
SCANNING FROM THE PAPERPORT SOFTWARE 21 To scan by previewing and adjusting settings: 1. On the left side of the Scan Manager Pro, select a configuration. For example, select Color Configurations and then select Custom to scan a color item with the preset Custom scan settings. The configuration settings appear as a list. Click the + (plus) sign to see the full list. Click the - (minus) sign to collapse the list. 2. Click the Preview button to preview the image before scanning. 3.
22 VISIONEER ONETOUCH 9220 USB SCANNER INSTALLATION GUIDE SCANNING 35MM SLIDES AND NEGATIVES Your 9220 OneTouch scanner is specially designed to scan 35mm slides and negatives. You can scan both positive and negative film images. A BRIEF EXPLANATION Your scanner has sensors that capture the image of the item being scanned. Those sensors are located in the body of the scanner.
SCANNING FROM THE PAPERPORT SOFTWARE 23 2. Place a negative strip or up to three 35mm slides into the guide on the transparency mask. ■ For negatives only, flip the film strip holder over the negative strip and snap it into place. ■ For 35mm slides, place the slides with the border text face up. To scan the 35mm slides or negative: 1. Start the PaperPort software and click the Scan icon on the command bar to open the Visioneer Scan Manager Pro. 2.
24 VISIONEER ONETOUCH 9220 USB SCANNER INSTALLATION GUIDE Choose a transparency scanning option: Scan 35mm Using: for 35mm slides Scan Negative Using: for negatives 3. Click Preview to preview the image and adjust settings as needed. 4. See “Adjusting the Settings in the Scan Manager Pro” on page 40 for details about adjusting settings. Tip: Set the resolution to 1200 dpi or better, Visioneer recommends using a resolution of 2700 dpi.
SCANNING FROM THE PAPERPORT SOFTWARE 25 SCANNING FROM A COMPUTER RUNNING WINDOWS XP If your computer is running the Windows XP operating system, you have a choice of scanning using the TWAIN-compliant Visioneer Scan Manager Pro software as just described (see “Scanning from a Computer Running Windows 98, Me, or 2000” on page 18) or scanning using the Microsoft Windows Image Application (WIA) standard as described below. Note: To scan transparencies you must scan from PaperPort (or other TWAIN software).
26 VISIONEER ONETOUCH 9220 USB SCANNER INSTALLATION GUIDE 8. Select the button most appropriate for the item you’re scanning. To scan with the Custom Settings option see the next section, “Fine Tuning Your Scans”. 9. Click Preview to preview the image before scanning. The image is displayed on the right side of the window. 10. Adjust the settings of the previewed image as desired: ■ Change the button selection for the type of item. ■ Adjust the custom settings. ■ Change the size of the scanned image.
SCANNING FROM THE PAPERPORT SOFTWARE 27 FINE TUNING YOUR SCANS You can select new settings before scanning to adjust how you want to scan a particular item. To select the scanner settings before you scan: 1. On the Scan using Visioneer 9220 Scanner window, select the Custom Settings button, and then click Adjust the quality of the scanned picture. The Advanced Properties dialog box opens. 2. Select the options for scanning.
28 VISIONEER ONETOUCH 9220 USB SCANNER INSTALLATION GUIDE Configuring You can configure the default scanning settings for: ■ The buttons on the scanner and the button panel ■ The Visioneer Scan Manager Pro application (used when scanning from the PaperPort software) CONFIGURING THE BUTTONS When you first connect your scanner to a computer, the scanner’s software configures each OneTouch button with appropriate settings.
CONFIGURING THE BUTTONS 29 To open the Configuration dialog box from the button panel: 1. Click the scanner icon on the right side of the Windows taskbar. 2. On the button panel, right-click the button you want to configure. The Configuration dialog box opens. The tab for the scan button you clicked is selected. ABOUT THE CONFIGURATION DIALOG BOX The tabs across the top of the Configuration dialog box correspond to the buttons on the scanner and the button panel.
30 VISIONEER ONETOUCH 9220 USB SCANNER INSTALLATION GUIDE The options on the Configuration dialog box are: Select Destination—The list of applications that can open to display the scanned image. Select the application that you want to automatically open to display or process the scanned image. Select Configuration—The list of the available scan configurations. The configuration settings include: color, black and white, or grayscale, resolution in dots per inch (dpi), page size, brightness, and contrast.
CONFIGURING THE BUTTONS 31 SELECTING NEW OPTIONS FOR THE BUTTONS You can select a new destination application, configuration, and image format to optimize a scanner button for the type of scanning you want to do. Use the Configuration dialog box to select new options. To select new options for a scanner button: 1. Open the Configuration dialog box and click the tab of the button whose options you want to change. 2.
32 VISIONEER ONETOUCH 9220 USB SCANNER INSTALLATION GUIDE CREATING NEW CONFIGURATIONS You cannot change settings of the preset (default) configurations. If you want to scan with settings other than those in the preset configurations, create a new configuration. You can do this either by copying a preset configuration and making the desired changes or by creating a new configuration from scratch. The new configuration is saved in the Select Configuration list so you can use it again.
CONFIGURING THE BUTTONS 33 6. On the Scan Settings tab, set the scan settings as required. Mode—Select Black/White to scan in black and white. For example, letters and memos are usually scanned in black and white. Select Grayscale to scan items such as documents containing drawings or black and white photographs. The scanning produces an image in varying shades of gray. Select Color to scan color photographs and other color items.
34 VISIONEER ONETOUCH 9220 USB SCANNER INSTALLATION GUIDE the size of the photo. When AutoCrop is selected, the scanner makes two passes—the first to sense the item’s size, and the second to scan the image. This option overrides the Page Size selection. DeScreen—Select this option when scanning a picture from a newspaper or magazine article, or other items that contains images with patterns or dots. Scans of patterns or dots sometimes have a distorted or wavy appearance.
CONFIGURING THE BUTTONS 35 ADJUSTING SCAN SETTINGS AND PAGE SETTINGS When scanning using a configuration you created yourself, you can adjust scan settings and page settings. For example, if the scanned image is too dark, you can adjust the brightness of the scan setting. Note: You cannot change the scan settings or page settings for any of the predefined scan configurations. You can only adjust settings for scan configurations that you create yourself. To adjust the scan settings and page settings: 1.
36 VISIONEER ONETOUCH 9220 USB SCANNER INSTALLATION GUIDE The Edit Scan Configuration dialog box opens. 3. On the Scan Settings tab, adjust scan settings as required. 4. Click the Page Settings tab and adjust page settings as required. 5. When finished, click OK. 6. On the Configuration dialog box, click OK to save and apply the changes to the button. Note: If you selected the Copy/Print button, the Edit Scan Configuration dialog box will have a Device tab for selecting options for a printer or copier.
CONFIGURING THE BUTTONS 37 SETTING PREFERENCES The preference settings are applied to each button and the scanner. To set preferences: 1. On the Configuration dialog box, select the tab for a button to set its preferences. 2. Click the Preferences tab on the Configuration dialog box. Preferences tab The OneTouch Preferences dialog box opens. The Button tab of the dialog box shows which button you selected for new preferences. The name of the button to receive new preferences 3.
38 VISIONEER ONETOUCH 9220 USB SCANNER INSTALLATION GUIDE button are usually email applications. By selecting the Show All Destinations option as the preference for the email button, all the other types of applications are included in the list of email destination applications. Select Destinations—Select this option to individually choose the types of applications to include in the button’s list of destination applications. Click in the boxes for the types of applications to include in the button’s list.
CONFIGURING THE BUTTONS 39 Show Scanner Icon in Windows Taskbar—Select this option to see the small icon representing the OneTouch scanner in the Windows taskbar. Scanner icon Scanner Lamp turns off—These options control when the scanner lamp powers goes off. ■ After idling for xx minutes—Select this option to automatically turn off the lamp if the scanner hasn’t been used for the specified time. This option saves energy and extends the lamp’s life.
40 VISIONEER ONETOUCH 9220 USB SCANNER INSTALLATION GUIDE ADJUSTING THE SETTINGS IN THE SCAN MANAGER PRO You can adjust the scan settings on the Visioneer Scan Manager Pro desktop to produce the best possible image for your needs. To adjust a setting: 1. Open the PaperPort desktop and then click the Scan icon to open the Scan Manager Pro. 2. On the left side of the Scan Manager Pro, select a configuration, for example, Color Configurations. 3.
ADJUSTING THE SETTINGS IN THE SCAN MANAGER PRO 41 The following figure shows an example of the Scan Manager Pro if you click the Resolution setting in the list, or click the Resolution and Sharpen button. Click to close the settings panel Note: The information in the scan settings list and the options you select on the various settings panels are interactive. As you change the settings on the panel, the numbers in the list on the left also change.
42 VISIONEER ONETOUCH 9220 USB SCANNER INSTALLATION GUIDE The following figure shows the resolution and sharpen options: Reminder: The location of various buttons on the panels may be slightly different on your Scan Manager Pro window. The appearance of the window depends on your monitor’s screen resolution. To adjust the resolution and sharpness: 1. To use one of the preset resolutions for typical scanned items, click one of the options in the list.
ADJUSTING THE SETTINGS IN THE SCAN MANAGER PRO 43 4. To return the settings to their original amounts, click Reset. The resolution and sharpen panel also includes an advanced setting for Moire patterns. Moire patterns are wavy, rippled lines that sometimes appear on the scanned images of photographs or illustrations, particularly newspaper and magazine illustrations. To scan the image and limit or eliminate moire patterns, select the Reduce Moire option.
44 VISIONEER ONETOUCH 9220 USB SCANNER INSTALLATION GUIDE To adjust the brightness and contrast: 1. Drag the Brightness slider to the left to make the item darker or to the right to make the item lighter. You can also type a number directly into the brightness setting box, or click the up and down arrows next to the box to increase or decrease the setting. 2. Drag the Contrast slider to the left to decrease the contrast or to the right to increase the contrast.
ADJUSTING THE SETTINGS IN THE SCAN MANAGER PRO 45 4. Click Adjust. The image changes to show your new settings. If the image is not what you want, click Reset to return the image to its original brightness and contrast. ADJUSTING GAMMA, SATURATION, AND COLOR HUE If you’re using the Color Configuration to scan, you can adjust a group of color settings.
46 VISIONEER ONETOUCH 9220 USB SCANNER INSTALLATION GUIDE To adjust the color settings: 1. From the Channel drop-down menu, choose the individual color (Red, Green, or Blue) that you want to use as the basis for adjusting the image, or choose All to adjust them together. 2. From the Edit Style drop-down menu, choose the type of color editing that you want to use: ■ Gamma—The response curve changes as you change the gamma setting; you can also change the saturation and hue settings.
ADJUSTING THE SETTINGS IN THE SCAN MANAGER PRO 47 ADJUSTING OUTPUT SIZE The item you’re scanning may not fill the scanner glass. In that case you can preview the item and use the Auto Trim option to automatically eliminate the unwanted sections of the image. You can also adjust the output size to scan only specific sections of an image.
48 VISIONEER ONETOUCH 9220 USB SCANNER INSTALLATION GUIDE 2. If the dotted line is not exactly where you want it, put the pointer on the line and drag the mouse. For example, if you want the scan to include a border around the image, you can drag the dotted line to be slightly larger than the autotrimmed area. To use the pointer to drag the line, make sure the pointer button is selected at the top of the window. 3. When the trimmed area is what you want, click Scan.
ADJUSTING THE SETTINGS IN THE SCAN MANAGER PRO 49 A new Scan Info box on the lower left portion of the Scan Manager Pro shows the information for the new area. You can select multiple areas. A Scan Info box opens for each one. The following figure shows an example of a manually selected area. Note: When you manually select an area, the settings on the other panels are for that selected area, not the whole image.
50 VISIONEER ONETOUCH 9220 USB SCANNER INSTALLATION GUIDE 6. To maintain the selected area’s length-to-width relationship (known as the aspect ratio), click Maintain Aspect. Note that as you rotate the area or maintain its aspect ratio, the width and height measurements change to reflect the new orientation of the image. 7. When the settings are what you want, click Scan. 8. If you want to remove the selected area and start over, click Remove on the Scan Info box.
ADJUSTING THE SETTINGS IN THE SCAN MANAGER PRO 51 THE SCAN INFO BOX The following figure shows the information on the Scan Info box: Physical size of the image to scan. Location of the top left corner of the image in the Preview window. Current location of the pointer as you drag it on the Preview window. Size of the file of the scanned image The space on your computer’s hard drive. ZOOMING IN AND OUT Enlarge or reduce the preview image by zooming in or out.
52 VISIONEER ONETOUCH 9220 USB SCANNER INSTALLATION GUIDE SETTING SCAN MANAGER PRO PREFERENCES You can set preferences for the Scan Manager Pro and scanner that are independent of the preferences for the PaperPort software. To set the Scan Manager Pro preferences: 1. Click the Preferences button. The User Preferences dialog box opens. 2.
ADJUSTING THE SETTINGS IN THE SCAN MANAGER PRO 53 ■ Show standard metric paper sizes—Select this option if you use metric paper to print images. When you select the scan size output options, the width and height dimensions are then for metric paper sizes. ■ Show standard US paper sizes—Select this option to set the paper sizes for standard US paper. ■ Units—Select the measurement units for the ruler around the preview window.
54 VISIONEER ONETOUCH 9220 USB SCANNER INSTALLATION GUIDE The Save Profile dialog box opens. 3. Type a name for the new profile and select desired options: ■ Store the custom output image size in this Profile—You can create a custom image size as part of the settings; if you adjusted the output image size for the selected configuration, that output image size is saved with this profile. See “Saving a Custom Size” on page 50 for more about a custom image size.
TROUBLESHOOTING 55 Maintenance This chapter contains information on troubleshooting, cleaning, uninstalling, and scanner specifications. TROUBLESHOOTING In addition to the troubleshooting information contained in this section, please see the Readme file in the PaperPort directory on your computer’s hard drive. The Readme file contains additional information that may help you diagnose problems with the scanner.
56 VISIONEER ONETOUCH 9220 USB SCANNER INSTALLATION GUIDE • Did you select another TWAIN source for acquiring images? If you use multiple TWAIN devices with your computer, you may have selected another source for images. Start the PaperPort software and click the Scan icon. From the Scanner drop-down list, choose Visioneer Scan Manager Pro. Problem: During installation I got the error message: PaperPort Installation is not complete. What do I do? The installation procedure was not successful.
HOW TO UNINSTALL YOUR SCANNER 57 HOW TO UNINSTALL YOUR SCANNER To uninstall the Visioneer OneTouch 9220 scanner, remove the OneTouch Version 3.0 software first, and then remove the PaperPort software, or other scanner software. STEP 1: UNINSTALLING THE VISIONEER ONETOUCH SOFTWARE 1. On the Windows taskbar, click Start, point to Settings, and then click Control Panel. 2. Double-click the Add/Remove Programs icon. ■ Windows 98, 98SE, or ME: The Add/Remove Programs Properties window opens.
58 VISIONEER ONETOUCH 9220 USB SCANNER INSTALLATION GUIDE STEP 2: UNINSTALLING THE PAPERPORT SOFTWARE 1. On the Windows taskbar, click Start, point to Settings, and then click Control Panel. Windows XP: choose Control Panel from the Start menu. 2. Double-click the Add/Remove Programs icon. ■ Windows 98, 98SE, or ME: The Add/Remove Programs Properties window opens. Select the Install/Uninstall tab. ■ Windows 2000 or XP: The Add or Remove Programs window opens.
CONTACTING VISIONEER TECHNICAL SUPPORT 59 CONTACTING VISIONEER TECHNICAL SUPPORT UNITED STATES AND CANADA Free Support on the Web www.visioneer.
60 VISIONEER ONETOUCH 9220 USB SCANNER INSTALLATION GUIDE VISIONEER 9220 USB SCANNER SPECIFICATIONS Bit Depth Scanning resolution Maximum Item sizes Scanner dimensions Height Width Length Weight USB Standard Operating temperature Relative humidity Power supply Input voltage/frequency Output voltage/watt Safety and agency certifications Hardware warranty 48-Bit color (internal), 16-Bit gray (internal), 1-Bit line art/text Optical resolution: 2400 x 4800 dpi 8.5 x 11.69 inches (21.6 x 29.7 cm) 3.
INDEX INDEX E email button 15 Numerics 35mm slide scan 22 A aspect ratio 49 Auto Trim 47 AutoCrop 33 AutoScan 19 resolution 53 B bit depth 52 bitmap icon 20 blurred image 41, 43 brightness 33, 43 sampler 44 C channel menu 46 color bit depth 52 channel 46 histogram 44 hue 45 options 45 scanning 33 computer requirements 4 Configuration dialog box 29 configuration settings adjusting 35 contrast 33, 43 sampler 44 copy/print button 16 custom button 16 custom size image 50 F fidelity 42 folder copy 30 fold
INDEX 62 O resolution 33, 41, 48, 53 resolution for transparencies 24 response curve 45 rotate image 49 scan settings adjusting 35 AutoCrop 33 brightness 33 contrast 33 creating 32 DeScreen 33 gamma 33 page size 33 resolution 33 scanner connecting 8 icon 11, 28 lamp warm-up 13, 52 locking tab 8 scanner lamp 52 idle time 39 scanner preferences 37 scanning from PaperPort 17 text 31 with OneTouch buttons 14 select format and page(s) 30 setup 6 sharpness 41 shortcut menu 28 slide scan 22 support 59 system r
