Visioneer® 9000 USB Scanner Installation Guide
COPYRIGHT INFORMATION Copyright © 2002 Visioneer, Inc. Reproduction, adaptation, or translation without prior written permission is prohibited, except as allowed under the copyright laws. The Visioneer brand name and logo are registered trademarks of Visioneer, Inc. The PaperPort brand name and logo are registered trademarks of ScanSoft, Inc. Microsoft is a U.S. registered trademark of Microsoft Corporation. Windows is a trademark of Microsoft Corporation.
TABLE OF CONTENTS i TA B L E O F C O N T E N T S Welcome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 What’s in the Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 The Visioneer 9000 USB Scanner . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 What You Need . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 INSTALLING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ii TABLE OF CONTENTS Adjusting Gamma, Saturation, and Color Hue . . . . . . . . . . . . . 41 Adjusting Output Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 Saving a Custom Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47 The Scan Info Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48 Zooming In and Out . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48 Setting Preferences . . . . . . . . . . . . . . . . . . . . .
WELCOME Congratulations on purchasing your Visioneer 9000 USB scanner. With this scanner you can quickly scan paper items such as letters, forms, photos, and magazine articles and place their electronic images on your computer. WHAT’S IN THE BOX Please check the contents of the box to make sure that all parts are included. If any items are missing or damaged, contact the dealer where you purchased the scanner.
2 VISIONEER 9000 USB SCANNER INSTALLATION GUIDE THE VISIONEER 9000 USB SCANNER Document cover Glass Reference marks OneTouch buttons panel Status light OneTouch buttons Custom scan Scan and email Scan and print Scan and OCR Scan to PaperPort USB port Power jack
THE VISIONEER 9000 USB SCANNER 3 Document cover. Close the document cover after placing items on the scanner glass. Glass. Place items face down on the glass aligned at the arrow symbol in the upper left corner. Reference marks. Marks on the border of the glass show where to align various paper sizes. OneTouch button panel. Press a OneTouch button to scan, copy/print, email, OCR (convert items to text), or use a custom setting for scanning. Status light. Shows the scanner’s status.
4 VISIONEER 9000 USB SCANNER INSTALLATION GUIDE WHAT YOU NEED To use the 9000 OneTouch scanner and software, you need the following: ■ IBM PC (or 100-percent compatible) Pentium or equivalent ■ Microsoft Windows 98, Windows 2000, Windows Me, or Windows XP ■ One available Universal Serial Bus (USB) port; the scanner can connect to either a USB1.1 or to a faster USB 2.
STEP 1: INSTALLING THE PAPERPORT SOFTWARE 5 Installing This section of the guide explains how to connect your Visioneer 9000 scanner to a USB 1.1 or USB 2.0 port. The PaperPort CD includes all the necessary installation files, as well as the PaperPort software files and other software files. STEP 1: INSTALLING THE PAPERPORT SOFTWARE Note: You must install the PaperPort software before connecting the scanner to the computer.
6 VISIONEER 9000 USB SCANNER INSTALLATION GUIDE Note: If the PaperPort CD does not automatically start, make sure the CD drive’s door is completely shut. If the CD still doesn’t start, the Autorun option on your computer is turned off. Click the Windows icon named My Computer. The window shows the drives available on your computer. Double-click the icon for your CD-ROM drive to see the list of files on the CD. Double-click the file named START32.EXE. The CD starts. 3.
STEP 2: CONNECTING THE SCANNER STEP 2: CONNECTING THE SCANNER Your OneTouch 9000 scanner connects to any available USB 1.1 or USB 2.0 port. Check your computer’s user’s guide for its USB port locations. Note: You do not have to shut off the power to your computer when connecting the scanner to a USB port. To connect the Visioneer 9000 scanner to a USB 1.1 or USB 2.0 port: 1. Turn the scanner over to see the locking tab on the bottom. Slide the locking tab to the unlocked position.
8 VISIONEER 9000 USB SCANNER INSTALLATION GUIDE 2. Plug one end of the USB cable into an available USB 1.1 or USB 2.0 port on the computer. 3. Plug the other end of the USB cable into the scanner’s USB port. USB If the plug does not attach easily, make sure that you are plugging it in correctly. Do not force the plug into the connection. Some computers also have keyboards with USB ports. You can plug the cable into the keyboard instead of the USB port on the computer. 4.
STEP 2: CONNECTING THE SCANNER 9 The status light on the front of the scanner comes on indicating the scanner is receiving power. Status light Your computer recognizes that a scanner has been plugged into the USB port and automatically loads the appropriate software from the CD to run the scanner. Note: If your computer is running Windows XP, you may see messages about using a fast USB 2.0 connection for your scanner. If your computer is not equipped with USB 2.
10 VISIONEER 9000 USB SCANNER INSTALLATION GUIDE GETTING THE PAPERPORT SOFTWARE USER’S GUIDE The Installation CD also includes your ScanSoft PaperPort User’s Guide. This guide provides more detailed information about the PaperPort software’s features. Please see the CD to view or print the guide. STEP 3: CHECKING OUT YOUR SCANNER The OneTouch software adds the scanner icon to the Windows taskbar (at the bottom right corner of the computer screen).
STEP 3: CHECKING OUT YOUR SCANNER 11 3. Choose About from the shortcut menu. A dialog box confirms that the scanner is properly connected. 4. Click OK to close the dialog box. Your scanner is ready to scan. IF THE SCANNER IS NOT PROPERLY CONNECTED If the scanner icon on the Windows taskbar has a red “X” through it, the scanner is not properly connected. Check for one of these possible problems: • Is a cable loose or not plugged in securely? Inspect all cable connections.
12 VISIONEER 9000 USB SCANNER INSTALLATION GUIDE Please see the Readme file in the PaperPort directory on your computer’s hard drive. The Readme file contains additional information that may help you diagnose problems connecting the scanner. Also see “Troubleshooting” on page 52 for more information. Note: The scanning lamp under the scanner’s glass needs to warm up before you can scan. A status message lets you know when the lamp is ready.
THREE WAYS TO SCAN PAPER ITEMS 13 Scanning THREE WAYS TO SCAN PAPER ITEMS You can scan paper items by pressing a OneTouch button, by clicking a button on the screen, or from the PaperPort software. • Scan with the Scanner Buttons Press a button on the scanner’s front panel. • Scan from the Screen Click the scanner icon on the Windows taskbar. A panel representing the scanner buttons appears. Click a button on the panel.
14 VISIONEER 9000 USB SCANNER INSTALLATION GUIDE SCANNING PAPER ITEMS WITH THE ONETOUCH BUTTONS Pressing a scanner button scans the item, and then sends the image either to the printer or to a software application on your computer. To scan by pressing a OneTouch button on the scanner: 1. Place an item to scan on the glass, face down, and align the edge of the item with the arrow marker at the upper left corner of the glass. 2. Close the document cover and press one of the OneTouch buttons.
SCANNING PAPER ITEMS WITH THE ONETOUCH BUTTONS 15 ABOUT THE ONETOUCH BUTTONS The OneTouch buttons are preconfigured for typical scanning tasks. To change the settings for the buttons, see “About the Configuration Dialog Box” on page 18.
16 VISIONEER 9000 USB SCANNER INSTALLATION GUIDE SCANNING PAPER ITEMS FROM THE BUTTON PANEL ON THE SCREEN Scanning from the button panel on the screen is just like pressing a scanner button, except you click the button on the screen. The scanner scans the item, and then sends the image either to the printer, or to a software application on your computer. This method of scanning is especially helpful if the scanner is not located close to your computer. To scan from the screen: 1.
CONFIGURING THE SCANNER 17 CONFIGURING THE SCANNER When you first connect your scanner to a computer, the scanner’s software configures each OneTouch button with appropriate settings. But, if you want to change the settings, you can reconfigure the buttons by selecting new options from the Configuration dialog box. You display the Configuration dialog box from either the shortcut menu or the Button Panel. To display the Configuration dialog box from the shortcut menu: 1. Right-click the scanner icon.
18 VISIONEER 9000 USB SCANNER INSTALLATION GUIDE To display the Configuration dialog box from the Button Panel: 1. Right-click the button you want to configure. The Configuration dialog box appears. The tab for the scan button you clicked is selected for you. ABOUT THE CONFIGURATION DIALOG BOX The Configuration dialog box shows the current settings for each scanner button. The tabs across the top of the dialog box correspond to the buttons.
CONFIGURING THE SCANNER 19 Click this tab to set preferences. Click the tab that corresponds to the scanner button you want to configure. Select a setting for scanning the item. Select a software application to send the scanned image to that application. Select format and page(s) options for the button. See “Setting Preferences” on page 26 to set Preferences. The options on the Configuration dialog box are: Select Destination—the list of applications that can open to display the scanned image.
20 VISIONEER 9000 USB SCANNER INSTALLATION GUIDE Select Format and Page(s)—displays a set of options for selecting a format for the scanned image and whether to scan a single page or multiple pages. The formats are bitmap and PaperPort. Use PaperPort for scanning any item. Bitmaps are usually for photos or artwork. The page icons represent single or multiple page scanning.
CONFIGURING THE SCANNER 21 SELECTING NEW OPTIONS FOR THE BUTTONS You can select a new destination application, configuration, and image format for a scanner button to optimize it for the type of scanning you want to do. You use the Configuration dialog box to select new options. To select new options for a scanner button: 1. Display the Configuration dialog box. Click the tab of the button whose options you want to change. 2.
22 VISIONEER 9000 USB SCANNER INSTALLATION GUIDE CREATING NEW CONFIGURATIONS You cannot change settings such as brightness or contrast of the preset configurations. To scan with settings other than those offered by the preset configurations, you must first create a new configuration and then use it to scan. To create a new configuration click the New button. You can also click Copy to copy a preset configuration, change its settings, and then save it under a new configuration name.
CONFIGURING THE SCANNER 23 2. In the Select Configuration list, click the configuration that you want to adjust. For example, the following figure shows a configuration named Special Scan for Dark Print (which you would have created earlier). 3. Click the Edit button. The dialog box appears for adjusting the scanning settings of the selected configuration.
24 VISIONEER 9000 USB SCANNER INSTALLATION GUIDE 4. Adjust the scan settings that you want. Mode—Select Black/White to scan in black and white. For example, letters and memos are usually scanned in black and white. Select Grayscale to scan items such as documents containing drawings or black and white photographs. The scanning produces an image in varying shades of gray. Select Color to scan color photographs and other color items.
CONFIGURING THE SCANNER 25 AutoCrop—Select this option to let the scanner automatically determine the size of the item being scanned. For example, if you put a photo in the middle of the glass, the scanner will automatically determine the size of the photo. When AutoCrop is selected, the scanner makes two passes—the first pass senses the item’s size, and the second pass scans the image. This option overrides the Page Size menu selection.
26 VISIONEER 9000 USB SCANNER INSTALLATION GUIDE SETTING PREFERENCES The preferences apply to each button and to the scanner. To set preferences: 1. On the Configuration dialog box, select the tab for a button to set its preferences. 2. Click the Preferences tab on the Configuration dialog box. Preferences tab The Preferences dialog box appears. The dialog box shows which button you selected for new preferences.
CONFIGURING THE SCANNER 27 fall into these categories. For example, the destination applications for the email button are usually email applications. By selecting the Show All Destinations option as the preference for the email button, all the other types of applications are included in the list of email destination applications. Select Destinations—Select this option to individually choose the types of applications to include in the button’s list of destination applications.
28 VISIONEER 9000 USB SCANNER INSTALLATION GUIDE Show Scanner Icon in Windows Taskbar—Select this option to see the small icon representing the OneTouch scanner in the Windows taskbar. Scanner icon Scanner Lamp turns off—These options control when the scanner lamp powers goes off. After idling for xx minutes—Select this option to automatically turn off the lamp if the scanner hasn’t been used for the specified time. This option saves energy and extends the lamp’s life.
SCANNING FROM THE PAPERPORT SOFTWARE 29 SCANNING FROM THE PAPERPORT SOFTWARE Instead of using a scanner button, you can scan directly from the PaperPort software. To scan transparencies you must scan from the PaperPort software or other Twain software. Note: You can also scan directly with other software that meets the Twain standards for scanning, which includes many graphics and imaging applications available for your computer.
30 VISIONEER 9000 USB SCANNER INSTALLATION GUIDE SCANNING AN ITEM WITH THE TWAIN BUTTON The following steps explain how to scan an item using the Twain button in the PaperPort software. You can scan many types of paper items, from small business cards to A4-sized pages. Note: Your Visioneer OneTouch scanner is initially set to scan from the PaperPort software for color items.
SCANNING FROM THE PAPERPORT SOFTWARE 31 Choose a scanning option. Scan Reflective Using is for scanning paper items. The other options are for transparencies. Click an icon to select a configuration—Color, Grey Scale, or Black&White. This example shows the Color/ Custom configuration is selected. Clicking the “+” sign in front of Custom shows Custom’s scan settings as a list. Click a setting in the list if you want to change it.
32 VISIONEER 9000 USB SCANNER INSTALLATION GUIDE To scan manually: 1. On the Scan Manager Pro, select a configuration for the scan. For example, select Color Configurations and then select Custom to scan a color item with the preset Custom scan settings. That configuration’s settings appear as a list. Click the “+” sign to see the full list of scan settings. Click the “-” (minus) sign to collapse the list. To see the settings for another configuration, click it in the list.
SCANNING FROM THE PAPERPORT SOFTWARE 33 Thumbnail image Bitmap icon To scan automatically: 1. Click AutoScan. The scanner uses your preselected resolution setting for the configuration you selected. See “Setting Preferences” on page 49 to set the AutoScan settings. In addition, your OneTouch 9000 scanner has built-in image analysis capabilities that find the optimum combination of settings for the item you’re scanning.
34 VISIONEER 9000 USB SCANNER INSTALLATION GUIDE The autoscanned image appears as a thumbnail on the PaperPort Desktop. 2. Use the PaperPort software to work with the image. Please see the PaperPort Getting Started Guide and PaperPort User’s Guide on the CD for more information about using the PaperPort software. GETTING HELP WITH THE PAPERPORT SOFTWARE The PaperPort software includes a complete set of help topics that answer questions about each feature of the software.
ADJUSTING THE SETTINGS ON THE SCAN MANAGER PRO 35 ADJUSTING THE SETTINGS ON THE SCAN MANAGER PRO You can adjust the scan settings on the Visioneer Scan Manager Pro to produce the best possible image. To adjust a setting: 1. Click a setting in the list of settings, or click its corresponding button on the right side of the Scan Manager Pro.
36 VISIONEER 9000 USB SCANNER INSTALLATION GUIDE Click to close the settings panel Note: The information in the scan settings list and the options that you select on the various settings panels are interactive. That is, as you change the settings on the panel, the numbers in the list on the left also change. SAVING A NEW PROFILE If you adjust the scan settings you can save them as a profile for later use. To save a new profile: 1. Select a configuration on the Scan Manager Pro, such as Color/ Custom. 2.
ADJUSTING THE SETTINGS ON THE SCAN MANAGER PRO 37 3. Click Save As. The Save Profile dialog box appears. 4. Type a name for the new profile. 5. Select the options you want: ■ Store the custom output image size in this Profile—you can create a custom image size as part of the settings; if you adjusted the output image size for the selected configuration, that output image size is saved with this profile. See “Saving a Custom Size” on page 47 for more about a custom image size.
38 VISIONEER 9000 USB SCANNER INSTALLATION GUIDE ADJUSTING THE RESOLUTION AND SHARPNESS Resolution determines the amount of detail you can see in the scanned image. The resolution setting for the scan is in dots-per-inch (dpi). The higher the resolution, the finer the details, however, higher dpi settings also produce larger files sizes. Usually the higher resolution settings are used for precision work, such as photographs or fine artwork. Sharpness determines the amount of blur in an image.
ADJUSTING THE SETTINGS ON THE SCAN MANAGER PRO 39 To adjust the resolution and sharpness: 1. To use one of the preset resolutions for typical scanned items, click one of the options in the list. For example, to set the resolution for scanning a business card, select Business Card. That setting is preset to read small print on a typical business card. 2. To set the resolution manually, drag the Resolution slider to the left to decrease the resolution or to the right to increase it. 3.
40 VISIONEER 9000 USB SCANNER INSTALLATION GUIDE The following figure shows the brightness and contrast options: To adjust the brightness and contrast: 1. Drag the Brightness slider to the left to make the item darker or to the right to make the item lighter. You can also type a number directly into the brightness setting box, or click the up and down arrows next to the box to increase or decrease the setting. 2.
ADJUSTING THE SETTINGS ON THE SCAN MANAGER PRO 41 For example, if you select Red from the menu and drag the Brightness and Contrast sliders, you can see how the red component of the histogram changes. Note, however, that the Green and Blue components also change relative to those new brightness and contrast settings. 3. Click the Auto button to have the scanner analyze the image and set the appropriate brightness and contrast.
42 VISIONEER 9000 USB SCANNER INSTALLATION GUIDE The horizontal axis of the response curve represents the original settings of the image, and the vertical axis represents new settings. Thus, the curve is a straight line from the lower left to upper right for an original, unchanged image. To see how the response curve indicates changes, drag the Gamma slider to left and right. The following figure shows the color options: To adjust the color settings: 1.
ADJUSTING THE SETTINGS ON THE SCAN MANAGER PRO 43 changes its colors in response to the new curve. The x and y numbers at the bottom of the response curve indicate the exact position of the pointer on the curve. The Gamma slider remains fixed when you use the Freestyle option. 3. Drag the Gamma, Saturation, and Color Hue sliders to the left to decrease the settings or to the right to increase the settings.
44 VISIONEER 9000 USB SCANNER INSTALLATION GUIDE The following figure shows the output size options: To Auto Trim an item: 1. Click Auto Trim. 2. Click Trim. The scanner senses the edges of the item on the glass and draws a dotted line around the image in the window. Check to make sure the dotted line encloses the image that you want. A new Scan Info box on the lower left portion of the Scan Manager Pro shows the information for the autotrimmed area. 3.
ADJUSTING THE SETTINGS ON THE SCAN MANAGER PRO 45 To use the pointer to drag the line, make sure the pointer button is selected at the top of the window. 4. When the trimmed area is what you want, click Scan. To manually set the output size for an item: 1. To scan the entire item on the glass, click Same as Original. No sections are trimmed. 2. To set the output size yourself, click Same as Original to remove the checkmark. The settings for the output size become active. 3.
46 VISIONEER 9000 USB SCANNER INSTALLATION GUIDE Note: When you manually select an area, the settings on the other panels are for that selected area, not the whole image. For example, the histogram on the resolution panel and the response curve on the brightness and contrast panel refer to only your newly selected area. A new Scan Info box for the area selected on the image. The area you selected to scan. 4.
ADJUSTING THE SETTINGS ON THE SCAN MANAGER PRO 47 6. To maintain the selected area’s length-to-width relationship (known as the aspect ratio), click Maintain Aspect. Note that as you rotate the area or maintain its aspect ratio, the width and height measurements change to reflect the new orientation of the image. 7. When the settings are what you want, click Scan. 8. If you want to remove the selected area and start over, click Remove on the Scan Info box.
48 VISIONEER 9000 USB SCANNER INSTALLATION GUIDE THE SCAN INFO BOX The following figure shows the information on the Scan Info box: Physical size of the image to scan. Location of the top left corner of the image in the Preview window. Current location of the pointer as you drag it on the Preview window. Size of the file of the scanned image Amount of space on your computer’s hard drive. ZOOMING IN AND OUT You enlarge or reduce the preview image by zooming in or out.
ADJUSTING THE SETTINGS ON THE SCAN MANAGER PRO 49 SETTING PREFERENCES You can set preferences for the Scan Manager Pro and scanner that are independent of the preferences for the PaperPort software. To set the Scan Manager Pro preferences: 1. Click the Preferences button. The User Preferences dialog box appears. 2. Select the preferences you want: ■ Enable selection of color bitdepths...
50 VISIONEER 9000 USB SCANNER INSTALLATION GUIDE ■ Do not wait for the Lamp...—when you first start scanning, the lamp in the scanner warms up slowly. This helps extend the life of the lamp. However, if you want the lamp to come on immediately without warming up. select this option. ■ Show standard metric paper sizes—select this option if you use metric paper to print images. When you select the scan size output options, the width and height dimensions are then for metric paper sizes.
ADJUSTING THE SETTINGS ON THE SCAN MANAGER PRO 51 GETTING HELP WITH THE SCAN MANAGER PRO The Scan Manager Pro has its own help system, separate from the PaperPort software help system. To see the Scan Manager Pro help information: 1. Click the Help button. The Help dialog box appears. 2. Scroll to see the help information. 3. Click the drop-down menu to see additional topics. Choose Home from the menu to return to the first page of help. 4.
52 VISIONEER 9000 USB SCANNER INSTALLATION GUIDE TROUBLESHOOTING In addition to the troubleshooting information contained in this section, please see the Readme file in the PaperPort directory on your computer’s hard drive. The Readme file contains additional information that may help you diagnose problems with the scanner. If you try all the troubleshooting procedures described in this section and in the Readme file, and the scanner still has problems, you may have a malfunctioning scanner.
CLEANING THE SCANNER GLASS 53 Problem: During installation I got the error message: PaperPort Installation is not complete. What do I do? The installation procedure was not successful. You need to reinstall the PaperPort software. Problem: I got the error message: PaperPort cannot allocate enough memory to perform internal critical operations. What do I do? Close any other active applications so that additional memory is available.
54 VISIONEER 9000 USB SCANNER INSTALLATION GUIDE HOW TO UNINSTALL YOUR SCANNER To uninstall the Visioneer OneTouch 9000 scanner, you remove the OneTouch Version 3.0 software first, and then remove the PaperPort software, or other software you installed for the scanner. STEP 1: UNINSTALLING THE VISIONEER ONETOUCH SOFTWARE FOR WINDOWS 98, 98 SE, AND ME: 1. Click Start on the Windows Taskbar. 2. Choose Settings then Control Panel from the menu. 3. Double-click the Add/Remove Programs icon.
HOW TO UNINSTALL YOUR SCANNER 55 Important: The Automatic option is selected by default. Visioneer recommends using the Automatic option. The other options are for advanced users only. 7. Click Next. The Perform Uninstall window appears. 8. Click Finish. The Visioneer OneTouch software is uninstalled from your computer. The status light on the scanner turns amber indicating that the scanner and computer are no longer communicating. 9.
56 VISIONEER 9000 USB SCANNER INSTALLATION GUIDE 6. Click the Change/Remove button. If two buttons appear instead of a single Change/Remove button, click Remove. The Select Uninstall Method Window appears. 7. Make sure the Automatic option is selected. Important: The Automatic option is selected by default. Visioneer recommends using that option. The other options are for advanced users only. 8. Click Next. The Perform Uninstall window appears. 9. Click Finish.
HOW TO UNINSTALL YOUR SCANNER 57 STEP 2: UNINSTALLING THE PAPERPORT SOFTWARE 1. Click Start on the Windows Taskbar. 2. Choose Settings then Control Panel from the menu. 3. Double-click the Add/Remove Programs icon. Windows 98, 98SE, or ME: The Add/Remove Programs Properties window appears. Make sure the Install/Uninstall tab is selected. Windows 2000 or XP: The Add or Remove Programs window appears. Make sure the Change or Remove option is selected in the left column. 4.
58 VISIONEER 9000 USB SCANNER INSTALLATION GUIDE 9. For Windows XP: Click Finish. 10. Close the Remove Programs From Your Computer window. Close the Control Panel. 11. Restart your computer. CONTACTING VISIONEER AMERICA TECHNICAL SUPPORT Visioneer provides technical support to all registered users in English and French. Please see the chart below for contact telephone numbers. For Latin America, call our U.S. Technical Support (1-541-884-5548).
CONTACTING VISIONEER—INTERNATIONAL TECHNICAL SUPPORT 59 CONTACTING VISIONEER—INTERNATIONAL TECHNICAL SUPPORT Visioneer provides technical support to all registered users in English, French, and German. Please see the chart below for contact telephone numbers. Visioneer offre une assistance technique à tous les utilisateurs enregistrés en anglais, français, et allemand. Reportez-vous aux numéros de téléphone listés dans le tableau ci-dessous.
60 VISIONEER 9000 USB SCANNER INSTALLATION GUIDE VISIONEER PHOTOPORT 9000 USB SCANNER SPECIFICATIONS Bit Depth Scanning resolution Maximum Item sizes Scanner dimensions Height Width Length Weight USB Standard Operating temperature Relative humidity Power supply Input voltage/frequency Output voltage/watt Safety and agency certifications Hardware warranty 48-Bit color (internal), 16-Bit gray (internal), 1-Bit line art/text Optical resolution: 1200 x 4800 dpi 8.5 x 11.69 inches (21.6 x 29.7 cm) 2.
INDEX INDEX A adjust appearance panel 40 adjust output size panel 44 adjust response curve panel 42 adjust settings on Scan Manager Pro 35–47 aspect ration 46 Auto Trim 43, 44 AutoCrop 25 AutoScan 31, 33 resolution 50 B bitdepth 49 bitmap 20 icon 32 black&white 24 blurred image 38, 39 brightness 24, 39 sampler 41 C CD other software 9 CD-ROM drive 4 channel menu 42 color 24, 37 bitdepth 49 histogram 40 options 42 color channel 42 color hue 41 computer restart 52 Configuration dialog box 18 configuration
image preview 32 image scale 45 image size 37 item size 25 R L S locking tab 7 M moire patterns 39 monitor 4 N new configuration 22 new profile 36 O OCR 21 word processor 21 OCR button 15 OneTouch buttons configuration settings 19 configure 17 configure before scan 21 preferences 26 select new options 21 optical character recognition.
INDEX thumbnail image 32 Twain applications 29 Twain button 30 V Visioneer Web site 52 W wavy appearance 25 Web site for help 52 word processor OCR 21 Z zoom image 48 63
