User Guide
Table Of Contents
- Table of Contents
- Welcome
- Please Use the Proper Section of This Guide
- What’s in the Box
- The Visioneer OneTouch 8600 Scanner
- What You Need
- Getting the PaperPort Software User’s Guide
- Installing to a USB Port
- Installing to a Parallel Port
- Checking Out Your Scanner
- Three Ways to Scan
- Scanning by Pressing the OneTouch Buttons
- Scanning from the Button Panel on the Screen
- About the OneTouch Buttons
- Scanning from the PaperPort Software
- Cleaning the Scanner Glass
- Visioneer OneTouch Scanner Specifications
ABOUT THE ONETOUCH BUTTONS 29
ADJUSTING SCAN SETTINGS AND PAGE SETTINGS
When scanning using a configuration that you created yourself, you can
adjust that configuration’s scan settings and page settings. For example,
if the scanned image is too dark, you can adjust the brightness of the
scan setting.
To adjust the scan settings and page settings:
1. Press and hold down a button on the scanner.
The Configuration dialog box appears.
The selected tab on the dialog box corresponds to the button you
pressed. You can click the other tabs for the other buttons.
Note: You cannot change the scan settings or page settings for any of
the predefined scan configurations. You can only adjust settings for
scan configurations that you create yourself. See the section above,
“Creating New Configurations”.