User Guide
Table Of Contents
- Table of Contents
- Welcome
- Please Use the Proper Section of This Guide
- What’s in the Box
- The Visioneer OneTouch 8600 Scanner
- What You Need
- Getting the PaperPort Software User’s Guide
- Installing to a USB Port
- Installing to a Parallel Port
- Checking Out Your Scanner
- Three Ways to Scan
- Scanning by Pressing the OneTouch Buttons
- Scanning from the Button Panel on the Screen
- About the OneTouch Buttons
- Scanning from the PaperPort Software
- Cleaning the Scanner Glass
- Visioneer OneTouch Scanner Specifications
18 VISIONEER ONETOUCH 8600 SCANNER INSTALLATION GUIDE
To connect the scanner:
1. After checking for all the above problems, right-click the scanner
icon with the red X over it.
The shortcut menu appears.
2. Choose Connect from the shortcut menu.
The software finds the scanner and makes the connection.
The scanner icon will no longer have a red X through it, and you’re
ready to begin scanning.
If you try all the troubleshooting procedures described above and in the
Readme file, and the scanner icon still has a red X through it, you may
have a malfunctioning scanner. Please see the technical support card
that you received with your scanner for technical assistance telephone
numbers. Also visit our web site at www.visioneer.com for additional
technical information.