User Guide
Table Of Contents
- Table of Contents
- Welcome
- Please Use the Proper Section of This Guide
- What’s in the Box
- The Visioneer OneTouch 8600 Scanner
- What You Need
- Getting the PaperPort Software User’s Guide
- Installing to a USB Port
- Installing to a Parallel Port
- Checking Out Your Scanner
- Three Ways to Scan
- Scanning by Pressing the OneTouch Buttons
- Scanning from the Button Panel on the Screen
- About the OneTouch Buttons
- Scanning from the PaperPort Software
- Cleaning the Scanner Glass
- Visioneer OneTouch Scanner Specifications
INSTALLING TO A PARALLEL PORT 11
5. Plug the other end of the scanner cable into the parallel port on the
back of your computer.
On some older computers the serial port and parallel port both
have 25-pin connectors that fit the scanner cable. Please make sure
you plug the scanner cable into a parallel port.
6. If you unplugged a printer from the parallel port earlier, plug it into
the “Printer” port on the scanner.
7. Plug the power adapter cable into the jack on the scanner.