User Guide
Table Of Contents
- Table of Contents
- Welcome
- Please Use the Proper Section of This Guide
- What’s in the Box
- The Visioneer OneTouch 8600 Scanner
- What You Need
- Getting the PaperPort Software User’s Guide
- Installing to a USB Port
- Installing to a Parallel Port
- Checking Out Your Scanner
- Three Ways to Scan
- Scanning by Pressing the OneTouch Buttons
- Scanning from the Button Panel on the Screen
- About the OneTouch Buttons
- Scanning from the PaperPort Software
- Cleaning the Scanner Glass
- Visioneer OneTouch Scanner Specifications
10 VISIONEER ONETOUCH 8600 SCANNER INSTALLATION GUIDE
INSTALLING TO A PARALLEL PORT
This section explains how to connect the OneTouch scanner to a
parallel port.
STEP 1: CONNECTING TO A PARALLEL PORT
The OneTouch scanner connects to any available parallel (LPT) port on
the back of your computer.
To connect the scanner to a parallel port:
1. Save any open files, and then shut down Windows.
2. Turn off the power to your computer.
3. If a printer is already attached to your computer’s parallel port,
unplug the printer cable from the computer. If you don’t have a
printer attached to your computer, skip this step.
4. Plug one end of the scanner cable into the port on the back of the
scanner marked “Host.”