User Guide
Table Of Contents
- Table of Contents
- Welcome
- Please Use the Proper Section of This Guide
- What’s in the Box
- The Visioneer OneTouch 8600 Scanner
- What You Need
- Getting the PaperPort Software User’s Guide
- Installing to a USB Port
- Installing to a Parallel Port
- Checking Out Your Scanner
- Three Ways to Scan
- Scanning by Pressing the OneTouch Buttons
- Scanning from the Button Panel on the Screen
- About the OneTouch Buttons
- Scanning from the PaperPort Software
- Cleaning the Scanner Glass
- Visioneer OneTouch Scanner Specifications
INSTALLING TO A USB PORT 7
To connect the OneTouch scanner to a USB port:
1. Plug one end of the USB cable into an available USB port.
Some newer computers also have keyboards with USB ports.
You can plug the scanner into the keyboard instead of the USB port
on the computer.
2. Slide the latch on the back of the scanner to uncover its USB port.
3. Plug the other end of the USB cable into the scanner’s USB port.
If the plug does not attach easily, make sure that you are plugging it
in correctly. Do not force the plug into the connection.
4. Plug the power adapter cable into the power jack on the back of the
scanner.
USB port