User Guide
Table Of Contents
- Table of Contents
- Welcome
- Please Use the Proper Section of This Guide
- What’s in the Box
- The Visioneer OneTouch 8600 Scanner
- What You Need
- Getting the PaperPort Software User’s Guide
- Installing to a USB Port
- Installing to a Parallel Port
- Checking Out Your Scanner
- Three Ways to Scan
- Scanning by Pressing the OneTouch Buttons
- Scanning from the Button Panel on the Screen
- About the OneTouch Buttons
- Scanning from the PaperPort Software
- Cleaning the Scanner Glass
- Visioneer OneTouch Scanner Specifications
6 VISIONEER ONETOUCH 8600 SCANNER INSTALLATION GUIDE
3. Follow the instructions on the screen to install the PaperPort
software on your computer.
During installation, a message tells you to connect the scanner to
the computer.
4. Follow the steps in the next section to connect the scanner.
When you’re finished, click Finish in the dialog box above.
STEP 2: CONNECTING TO A USB PORT
The OneTouch scanner connects to any available USB port. Check
your computer’s user’s guide for its USB port locations.
Note: You do not have to shut off the power to your computer when
connecting the scanner to a USB port.