Use and Care Manual

9
(Continued)
8
CONTROL PANEL
The unit can be operated using the remote control or the control panel on the side
of the unit.
REMOTE CONTROL
The buttons on the remote allow the access to the same settings as the main
control panel.
Model: AAA/LR03
Voltage: DC 1.5V
Capacity: 1300mAh
This remote control uses two AAA /LR03 batteries (NOT INCLUDED)
WARNING: NEVER dispose of batteries in re. Failure to observe this precaution
may result in an explosion. Dispose of batteries at your local hazardous material
processing center or per local laws.
INSTRUCTIONS FOR USEINSTRUCTIONS FOR USE
CONTROL
BUTTONS
CONTROLS/DISPLAY FUNCTION/DESCRIPTION
ON/OFF Turns the heater ON or OFF.
Mode
Selects between LOW, MED,
HIGH modes.
Temperature
Up
Increases desired temperature.
Temperature
Down
Decreases desired temperature.
Timer Sets hour value for the timer.
REMOTE CONTROL INSTRUCTION
Power Turns the heater ON or OFF.
Mode Selects between LOW, MED, HIGH modes.
Increases desired temperature.
Decreases desired temperature.
Timer Sets hour value for the timer.
>
>
POSITIONING THE HEATER
• Place the unit in an upright position on a at, stable and heat-resistant
surface.
•
Ensure that there are no ammable or heat-sensitive materials or substances
within 39.5 in. of the front and 19.5 in. of the rear and sides of the unit.
• Do not cover the heater.
CONNECTING THE HEATER
• Before inserting the plug into a suitable socket, make sure that the unit is
intact, properly assembled and that there is no signs of damage to the
appliance or its power cable.
• To avoid overloading a circuit, connect the unit only to a circuit where no
other equipment is connected.
•
When the power switch is in the OFF position, insert the plug into a grounded
socket and turn on the power.
DISPLAY SCREEN
HEAT
LEVEL
Low
Medium
High
Timer
Power