Use and Care Manual

6 7
HEADLINE
(Continued)
ASSEMBLY INSTRUCTIONS
SAFETY GUIDELINES
appliance with any solid-state Speed Control Device or any variable speed
controllers.
ENERGY SAVING AND UNIT SAFETY
PROTECTION TIPS
• Do not cover or restrict the airow. Do not use in dusty environment.
• For safety and maximum performance, the minimum distance from a wall or
objects should be 19.5 in.
PRODUCT DIAGRAM
Handle
Digital
Display
Screen
Control
Panel
Cord
Storage
with
Hook
Pedals
Mounting
Plates
Castors
PART DESCRIPTION QUANTITY
A Heater 1
B Bolts 2
C Nuts 4
D Pedals 2
E Buttery Nuts 2
F Casters 4
/ Owners Manual 1
Oil
Filled
Fins
1. Turn the heater (A) upside down.
remove the Buttery Nuts from the
bolts (B). Then insert the bolts (B) in
“U” direction into the heater (A).
2. Use the Buttery Nuts (E) removed
from Step 1 to secure both pedals (D)
to the bolts (B).
3. Remove the Nuts (C) preassembled
to the Casters (F). Insert the top of
Casters into the holes on the Pedals
(D). Use the removed Nuts to secure
the Casters to the Nuts.
4. Turn the assembled unit upright.
Ensure the Castors are installed
correctly and level. Place the heater
only on a at and stable surface.
Placing the heater on an incline can
cause damage to the heater and lead
to hazardous situations.
WARNING
DO NOT open or rell/change oil ns.
Oil ns are permanently sealed and DO
NOT require relling or oil changing.
Attempting to open ns will damage the
unit. This unit is lled with a non-toxic
mineral oil.
(Continued)