OWNER’S MANUAL DIGITAL OIL-FILLED HEATER 24” | 600/ 900 / 1500W MODEL 1VAHL24D
CONTENTS (Continued) CONTENTS TECHNICAL DATA Safety Guidelines.....................................................................................4-6 Model: 1VAHL24D Product Diagram..........................................................................................7 Voltage: 120V~ / 60Hz Watts: 600 / 900 / 1500W Assembly Instructions..................................................................................8 Instructions for Use..........................................................
SAFETY GUIDELINES SAFETY GUIDELINES READ AND SAVE THESE INSTRUCTIONS power cord is not stretched, exposed to sharp object/edges, or routed under the unit. 20. Any service other than regular cleaning should be performed by an authorized service representative. Failure to comply could result in a voided warranty. 21. Never use the plug as a switch to start and turn off the heater. Use the provided power button located on the control panel. 22. Do not use an external timer. 23.
HEADLINE SAFETY GUIDELINES (Continued) 1. T urn the heater (A) upside down. remove the Butterfly Nuts from the bolts (B). Then insert the bolts (B) in “U” direction into the heater (A). appliance with any solid-state Speed Control Device or any variable speed controllers. ENERGY SAVING AND UNIT SAFETY PROTECTION TIPS • Do not cover or restrict the airflow. Do not use in dusty environment. • For safety and maximum performance, the minimum distance from a wall or objects should be 19.5 in.
INSTRUCTIONS FOR USE INSTRUCTIONS FOR USE POSITIONING THE HEATER CONTROL PANEL • Place the unit in an upright position on a flat, stable and heat-resistant surface. • Ensure that there are no flammable or heat-sensitive materials or substances within 39.5 in. of the front and 19.5 in. of the rear and sides of the unit. • Do not cover the heater. The unit can be operated using the remote control or the control panel on the side of the unit.
OPERATION CLEANING AND MAINTENANCE TURNING ON/OFF ATTENTION: Please shut off the unit and unplug from the mains before cleaning or performing any maintenance. SELECTING A POWER LEVEL CLEANING THE SURFACE Turn the heater ON/OFF by pressing the “ON/OFF” button. Press the “HEAT” button repeatedly to select a Heat level between LOW, MEDIUM and HIGH. The display will show the currently selected Heat level. SETTING THE TEMPERATURE The desired temperature can be set between 59°F and 95°F.
4560 W. 160th Street Cleveland, OH 44135 833-950-1185 | support@visionairproducts.com www.visionairproducts.
