Use and Care Manual

9
USAGE
TO OPERATE FAN ONLY
TurntheOn/OPowerLevelControldialtotheFansetting.Turnthermostat
fully clockwise so the fan will run continuously
TURNING OFF
Turn the center dial to the OFF position before unplugging or plugging in the
heater. Heater should be unplugged when not in use.
IMPORTANT SAFETY FEATURES
The power indicator light, located near the control panel, lights whenever the
heater or fan is turned on. The heater is equipped with an automatic overheat
protection device located inside the body of the heater. If the heater grille is
obstructed, or if the heater gets too hot for any reason, the automatic overheat
protectiondevicewillturntheheatero.Toresettheheater,simplyturnpower
oandunplugtheheaterfor10minutesuntilitcoolsdown,andthenyou
may plug the heater in and restart. Be sure that the heater is on a smooth level
surface with no obstructions.
(Continued)