Use and Care Manual

SAFETY GUIDELINES

CAUTION

Always plug heaters directly into a wall outlet. Never use with an

extension cord or power strip.

OVERHEAT SAFETY FEATURE

This heater is equipped with an overheat safety feature. When the heater’s

internal components reach a certain temperature that could cause overheating

and possible re, the heater will automatically shut o.

• A thermal overload protector is built in to prevent overheating. When an

“overheat” temperature is reached, the heater will automatically shut o.

Operation can resume only when the user resets the unit.

• To reset the unit, unplug the heater, ensure the power is turned o, and wait

15 to 20 minutes for the unit to cool down.

• Follow OPERATING INSTRUCTIONS to return heater to operating mode.

WARNING

It is normal for the power cord to feel warm to the touch; however, a loose t

between the outlet and the plug may cause overheating of the plug. If this occurs,

try inserting the plug into a dierent outlet. Contact a qualied electrician to

inspect the original outlet for damage.

(Continued)