OWNER’S MANUAL PERSONAL CERAMIC HEATER 7” | 400W MODEL 1VAHC7
TECHNICAL DATA Model: 1VAHC7 Voltage: 120V~ / 60Hz Watts: 400W CONSUMER PRODUCT INFORMATION For your own records, please attach a copy of your sales receipt to this manual.
CONTENTS Safety Guidelines....................................................................................................4-7 In The Box................................................................................................................... 8 Product Diagram........................................................................................................ 8 Instructions For Use ..................................................................................................
SAFETY GUIDELINES WARNING Read and understand this entire owner’s manual, including all safety information, before plugging in or using this product. Failure to do so could result in fire, electric shock, or serious personal injury. IMPORTANT INSTRUCTIONS When using this electric unit, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following: 1. Read ALL instructions before using this unit. 2.
SAFETY GUIDELINES (Continued) 8. DO NOT operate any heater with a damaged cord or after the heater malfunctions, has been dropped, or damaged in any manner. Discard damaged heater or return heater to authorized service facility for examination, electrical or mechanical adjustment, or repair. 9. This heater is not intended for use in bathrooms, laundry areas, showers or swimming pools and similar locations. NEVER locate heater where it may fall into a bathtub or other water container.
SAFETY GUIDELINES (Continued) 17. It is normal for the plug to feel warm to the touch; however, a loose fit between the AC outlet (receptacle) and plug may cause overheating and distortion of the plug. Contact a qualified electrician to replace loose or worn outlet. 18. To disconnect heater, turn controls to OFF, then remove plug from outlet. Pull firmly on the plug, DO NOT unplug by pulling on the cord. 19. Always unplug the unit before moving or cleaning, or whenever the heater is not in use. 20.
SAFETY GUIDELINES (Continued) CAUTION Always plug heaters directly into a wall outlet. Never use with an extension cord or power strip. OVERHEAT SAFETY FEATURE This heater is equipped with an overheat safety feature. When the heater’s internal components reach a certain temperature that could cause overheating and possible fire, the heater will automatically shut off. • A thermal overload protector is built in to prevent overheating.
USAGE IN THE BOX • Compact Ceramic Heater • Owner’s Manual PRODUCT DIAGRAM Hot Air Outlet Power Switch 8
USAGE (Continued) INSTRUCTIONS FOR USE 1. Place the product on a firm, level surface. 2. With the POWER SWITCH in the OFF position, plug the unit directly into a 120V AC electrical outlet. 3. Turn the POWER SWITCH to ON position. 4. Turn the POWER SWITCH to OFF and unplug the heater when finished using. MAINTENANCE 1. Turn POWER SWITCH to the OFF position. 2. Unplug the unit and let it cool completely. 3. To keep the heater clean, the outer shell may be cleaned with a soft, damp cloth.
STORAGE Store the heater in a cool, dry location when not in use. To prevent dust and dirt build-up, use the original packaging to repack the unit. TROUBLESHOOTING If the heater will not operate, please check the following before seeking repair of service: 1. Check if the power cord is plugged into an electrical outlet. If not, plug in unit to appropriate outlet. 2. Check if electricity to the outlet is working. 3. Ensure power is turned to ON position. 4.
4560 W. 160th Street Cleveland, OH 44135 833-950-1185 | support@visionairproducts.com www.visionairproducts.
