Specifications

24
Using Line Markers with the Camera
The following directions can be used to add/
remove Line Markers from the Camera:
1. Press and hold the Mode button for at least 3
seconds to begin the “Entering Setup” Menu.
2. The menu will automatically indicate “1. Line
 MarkersOn”or“LMOn”.
3. Press the “Mode” button.
4. Themenuwillindicate“1.LineMakersOff”or
 “LMOff”.
5. Press the “-” button to activate Line Marker.
 Thisscreenwillindicate“1.LineMarkersOn”.
6. Press the “Mode” button. The menu indicates
“2. Upper Marker ADJ” or “Top Marker”.
7. Press the +/- buttons to raise or lower the
Upper Line Marker.
8. Press the Mode button to set the
Upper Line Marker.
9. The menu will indicate “3. Lower Marker
ADJ” or “Bottom Marker”.
10. Press the +/- buttons to raise or lower the Lower
Line Marker.
11. Press the Mode button to set the Lower Line
Marker.
12. To remove Line Markers repeats steps 1-3.
13. Press the “+” button to return to the “1. Line
 MarkersOff”Menuor“LMOff”.
14. Press the Mode button to exit the Menu.
Figure 1
ENTERING SETUP
Using Acrobat LCD
1.Line Markers
2.Upper Marker ADJ
or
3.Lower Marker ADJ
23