User manual

Xvision X4/8/16D User Manual V1.1
68
9-5.3 PTZ Control
In the main display, right click on the channel will bring up PTZ control panel as below.
󵞺Some PTZ communication protocols from different brands are not 100% compatible.
Therefore, some of these functions may be unavailable.
Icon Description
8 direction key Rotate the PTZ
ZOOM+Zoom in
ZOOM : Zoom out
Setup the PTZ spot as pre-set N.
FOCUS+ : Focus in
FOCUS-Focus out
Move to pre-set N.
Set PTZ Preset Setup 16 pre-set N.
Goto PTZ Pres
et
Move to specific pre-set N.
Activate auto pre-set tour󵞺
PTZ Sensitivity
Setup PTZ sensitivity󵞺
Setup the “start” and “end” of liner scan.󵞺
Activate the liner scan cruise.󵞺
B
Adjust the Brightness (Down is +)
C
Adjust the Contrast (Down is +)
S
Adjust the Sharpness (Down is +)