User guide

6
VTB USER GUIDE
Background
The selected objects is brought to the background of the page. It can be covered by other
objects making it invisible.
Align left
The selected objects are aligned to left margin. The reference object will be the last selected.
Align right
The selected objects are aligned to right margin. The reference object will be the last selected.
Align top
The selected objects are aligned to top margin. The reference object will be the last selected.
Align bottom
The selected objects are aligned to bottom margin. The reference object will be the last selected.
Align horizontal
The selected objects are aligned at the horizontal center of the last selected object.
Align vertical
The selected objects are aligned at the vertical center of the last selected object.
Program compiling
The entire application is compiled to create the binary file in the format of the platform selected. The
compiling results are showed in the MESSAGE WINDOW and if there are some compiling errors the
binary file will not be created.
Transfer Program
The binary file created by compiler is transferred to the control by RS232 or ETHERNET line. The
program will be saved in the permanent memory of the control and then it will be executed.
CanOpen Configurator
It launches the CanOpen configuration tool (see chapter CANOPEN CONFIGURATOR).