User guide

104
VTB USER GUIDE
13.4 Firmware update
With DEBUG application it is possible to update the FIRMWARE of the hardware in use.
WARNING: FIRMWARE update can be executed only by serial port RS232.
With the INFO button this window is showed:
From Menu Gestione Firmware we can chose between two options:
Update from Server
In this case an INTERNET connection is necessary. The application checks if on SERVER PROMAX there is a newer version
of the FIRMWARE proposing the updating.
Update from file
It allows to update the hardware FIRMWARE with a file .SREC.
WARNING: Updating from file, no control of the firmware revision and compatibility with the hardware is made.
WARNING: During the phase of updating the application are stopped but it WILL NOT BE LOST.